Yamato DNF-301-115V Programmable Energy Saving Forced / Natural Convection Oven 27L, 115V

This listing is for a Genlab M6CV Incubator Oven. The unit is in full working condition and is read (more)y for immediate release. GENLAB Classic Incubators Overview The GENLAB Classic Incubators are designed for efficiency and reliability, serving a variety of biological analysis, research, and general laboratory applications. Their user-friendly thermostat system makes them easy to operate, and they can be customized to meet specific needs. Specifications: Sizes Available: Ranges from 6 to 100 liters, accommodating different laboratory needs. Temperature Range: Natural Convection: Ambient +5ºC to 70ºC Fan-Assisted: Ambient +8ºC to 70ºC Temperature Fluctuation: Maintains a fluctuation of ±0.25ºC at 37ºC, ensuring precise environmental conditions for sensitive samples. Control System: Easy-to-Use Thermostatic Control: Streamlined for straightforward operation. Independent Overheat Thermostat: Provides an additional safety layer to prevent overheating. Design Features: Exterior: Made from sheet steel with an easy-to-clean powder-coated finish, ensuring durability and cleanliness. Interior Chamber: Standard mild steel coated with aluminum (CLAD), with stainless steel as an optional upgrade for enhanced corrosion resistance. Shelving: Equipped with fixed shelf runners and removable chrome-plated wire grid shelves for flexible sample storage. Insulated Door: Comes standard to minimize heat loss and improve energy efficiency.

BINDER KB-115 refrigerated incubator / drying oven with forced convection 100°C Model: KB115 refrige (more)rated and ventilated Capacity: 115 liters Temperature range: -5 ° C to 100 ° C Inner glass door Integrated digital temperature display 2 shelves Cable passage: Ø 30 mm (on the left wall) Power supply: 230 V, Frequency: 50-60 Hz, Power: 460 W, Internal dimensions: 60 x 40 x 48 cm Overall dimensions: 83 x 70 x 101 cm Weight: 106 kg Year of manufacture: 2012 Tested at 37°C and -10°C

This was removed from a university lab where it was surplus to requirements. The unit powers up and  (more)is in good working order up to 1200˚C. It is in good cosmetic condition with minor marks.

Yamato DKL-301C Forced Convection Oven 27L, 115V Temperature Range Room temp. +10~260°C Temperature (more) Distribution Accuracy ±2.5°C (at 260°C) Chamber Volume 27L Features - Fixed temperature, Quick auto stop, Auto stop, and Auto start operating modes with easy control capabilities - Settings can be made digitally with the dedicated operation menu keys or the ▲/▼ keys - Calibration off-set as auxiliary function - Self-diagnostic functions, MCB with over current protector, hydraulic standalone overheat prevention device Economical forced convection 27L constant temperature oven with basic functions and safety features. Fixed temperature, Quick Auto stop, Auto stop, and Auto start operating modes with easy control capabilities. Settings can be made digitally with the dedicated operation menu keys or the ▲/▼ keys. Operating temp ambient +10~260°C. INCLUDED: The Yamato DKL-301C Forced Convection Oven 27L, 115V includes: - 2 Stainless Steel Shelves - 4 Shelf Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Memmert UF260TS Forced Circulation Pass-Through Oven 256L, 115V Working Temperature Range At least  (more)10°C above ambient to +250°C Setting Resolution (Temperature) Up to 99.9°C: 0.1°C / From 100°C: 0.5°C Chamber Volume 256L (9.04 Cu. Ft.) Features - Working temperature range from at least 10°C above ambient to +250°C - Volume capacity of 256L (9.04 Cu. Ft.) with stainless steel interior - TwinDISPLAY with adaptive multifunctional digital PID-microprocessor controller and dual high-definition TFT-color displays - Forced air circulation adjustable in 10% steps, with pre-heated fresh air admixture - AutoSAFETY system with integrated over- and undertemperature protection - Supports up to 9 shelves with a maximum chamber load of 661 lbs - Three freely selectable temperature calibration points - Function SetpointWAIT ensures process begins only once set temperature is reached The Memmert UF260TS Forced Circulation Pass-Through Oven 256L, 115V is designed to provide exceptional precision and reliability for temperature-sensitive processes. With a working temperature range of 10°C above ambient to +250°C and a spacious 256-liter stainless steel interior, this oven is perfect for demanding laboratory and industrial applications. The TwinDISPLAY system, featuring two high-definition TFT-color displays, allows for precise control, while the adaptive multifunctional PID-microprocessor controller ensures accurate and uniform temperature management. Forced air circulation can be adjusted in 10% increments, with a pre-heated fresh air admixture, enhancing efficiency and temperature stability. This pass-through oven offers advanced safety features, including the AutoSAFETY system with integrated over- and undertemperature protection, along with visual and acoustic alarms. With support for up to nine shelves and a maximum chamber load of 661 lbs, the UF260TS can accommodate large samples or multiple smaller items with ease. Additional features such as the SetpointWAIT function, which ensures the process begins only after the set temperature is reached, and the HeatBALANCE function, which optimizes heating performance, make this oven a valuable asset for any lab or production environment. INCLUDED: The Memmert UF260TS Forced Circulation Pass-Through Oven 256L, 115V includes: - 2 Stainless Steel Grid - Tilt Protection Wall Bracket - Base Cladding with Screw Connection - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert UN110 Natural Convection Oven 108L, 115V Temperature Range Ambient +5°C to 300°C Convection (more) Type Natural Convection Chamber Volume 108 L Features - 108 L (3.8 cu.ft.) chamber volume for flexible sample accommodation - Temperature range from +5°C above ambient to +300°C for diverse applications - 1 Pt100 sensor DIN class A in 4-wire circuit for precise monitoring - SingleDISPLAY with digital PID-microprocessor controller and high-definition TFT-color display - Natural convection system for even heat distribution - Electronically adjustable air flap for controlled fresh air admixture - Corrosion-resistant stainless steel interior with integrated heating on all sides - Supports up to 5 grids, with a max chamber load of 386 lbs The Memmert UN110 Natural Convection Oven 108L, 115V provides precision and reliability for diverse laboratory applications with its spacious 108 L (3.8 cu.ft.) chamber and temperature range from +5°C above ambient to 300°C. Featuring a SingleDISPLAY digital PID-microprocessor with high-definition TFT display, this oven allows for precise control, while the Pt100 sensor ensures accurate temperature monitoring. Its natural convection system evenly distributes heat, complemented by an electronically adjustable air flap for optimized airflow. Built with a corrosion-resistant stainless steel interior and capable of supporting up to 5 grids with a maximum load of 386 lbs, the UN110 is engineered for durability and efficient performance. INCLUDED: The Memmert UN110 Natural Convection Oven 108L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Thermo Scientific TSQ Quantum Access Mass Spectrometer System - Faulty Ion Gauge The unit powers up  (more)but has not been tested further at our facility. We are told it is not in working order and requires a new Ion gauge. It is in otherwise good cosmetic condition but is sold for spares/repairs. Comes with boxed parts:-Opton-20012 APCI Probe, Ion Max SourceOpton-20012 APCI Probe USI Also comes with varous packs of tubed fusing.

This listing is for a Biotest Hycon RCS Air Sample Plus Air Sampler.The unit is in full working cond (more)ition and is ready for immediate release.The Biotest Hycon RCS Plus Air Sampler is a highly reliable microbial air sampling system designed to monitor the microbiological quality of ambient air. It is widely used across multiple industries such as pharmaceuticals, food and beverage, healthcare, and other sectors where air quality is critical. This device operates using the impaction principle, where airborne microorganisms are captured onto an agar strip via centrifugal force for subsequent analysis.Key Features:Impaction Sampling Method: Separates and captures airborne microorganisms onto an agar strip for precise microbiological analysis.Sampling Volumes:7 preset sampling volumes: 10, 20, 50, 100, 200, 500, and 1000 litres.3 user-defined volumes adjustable between 1 to 1999 litres, providing flexibility for various sampling requirements.Intrinsic Safety: Certified to ignition class “ib,” which ensures safe operation in explosion hazard or hazardous areas.GMP and FDA Compliance: The device meets industry-standard Good Manufacturing Practice (GMP) and FDA guidelines for use in regulated environments.Adaptability: Customizable settings to fit user-specific needs and different air sampling conditions.Ergonomic Design: The lightweight and portable design allows for ease of use in routine air quality monitoring tasks.

QIAGEN’s real-time PCR cycler, the Rotor-Gene Q, combines multiple optimized design features to prov (more)ide the outstanding performance and reliable results that your research demands. Together with optimized QIAGEN kits for real-time PCR, the Rotor-Gene Q enables streamlined analysis for a wide range of applications. Q-Rex Software is the new operating and analysis software for life science qPCR applications, with a plug-in concept that lets you add new functionality without affecting established workflows. A range of QIAGEN kits for the Rotor-Gene Q enables reliable quantification in all your real-time PCR applications without the need for optimization of reaction and cycling conditions. Kits for real-time PCR and HRM applications are available for: Gene expression analysis Pathogen detection DNA methylation analysis Genotyping and gene scanning miRNA research Channel: Blue Excitation: 365 ± 20 nm Detection: 460 ± 20 nm Examples of fluorophores detected: Marina Blue, Edans, Bothell Blue, Alexa Fluor 350, AMCA-X Channel: Green Excitation: 470 ± 10 nm Detection: 510 ± 5 nm Examples of fluorophores detected: FAM, SYBR Green I, Fluorescein, EvaGreen, Alexa Fluor 488 Channel: Yellow Excitation: 530 ± 5 nm Detection: 557 ± 5 nm Examples of fluorophores detected: JOE, VIC, HEX, TET, MAX, CAL Fluor Gold 540, Yakima Yellow Channel: Orange Excitation: 585 ± 5 nm Detection: 610 ± 5 nm Examples of fluorophores detected: ROX, CAL Fluor Red 610, Cy 3.5, Texas Red, Alexa Fluor 568 Channel: Red Excitation: 625 ± 5 nm Detection: 660 ± 10 nm Examples of fluorophores detected: Cy5, Quasar 670, LightCycler Red640, Alexa Fluor 633 Channel: Crimson Excitation: 680 ± 5 nm Detection: 712 high pass nm Examples of fluorophores detected: Quasar 705, LightCycler Red705, Alexa Fluor 680 Channel: HRM Excitation: 460 ± 20 nm Detection: 510 ± 5 nm Examples of fluorophores detected: SYBR Green I, SYTO9, LC Green, LC Green Plus+, EvaGreen Operating software is available. Analysis software must be purchased.

The Quattro is a 4x 96 wells thermal cycler. Each of the 4 segments can be programmed individually a (more)ccording to user specified programs.

Techne’s Dri-Block heaters provide a safe, dry, constant temperature source in the laboratory. The u (more)nit can be used for incubation, boiling, inactivation, wet ashing, sample concentration, enzyme analysis and many other clinical and industrial purposes. Working temperature range: Ambient to 100°C Temperature stability: ±0.05°C at 40°C Temperature stability: ±0.1°C at 100°C Temperature setting: 3 push buttons Temperature display: 4 digit LED Set point resolution: 0.1°C Set point accuracy: ±1°C Temperature variation: 0.2°C at 40°C Heat up time 30°C to 37°C: 8 min Heat up time 30°C to 56°C: 9 min Heat up time 30°C to max: 12 min Dimensions (H x W x D): 105 x 240 x 202 mm

Biorad MINI-SUB CELL GT electrophoresis cuvette. Includes cover and power cables, 1 gel tray, 1 limi (more)ter for the formation of gels and 2 combs of 8 and 15 wells, respectively. User manual. Biorad MINI-SUB CELL GT is a compact and versatile gel electrophoresis system that allows efficient analysis of DNA and protein samples. With its ergonomic design and small size, this equipment is ideal for laboratories with limited space. MINI-SUB CELL GT features a transparent acrylic gel chamber that allows easy visualization of samples during the electrophoresis process. Furthermore, its hermetic sealing system ensures accurate and reproducible migration of samples. Accommodating up to 2 standard size gels, this system offers flexibility in the number of samples that can be analyzed simultaneously. Biorad MINI-SUB CELL GT is a reliable and efficient tool for the separation and analysis of nucleic acids and proteins in the laboratory.