Yamato DKL-601C Forced Convection Oven 150L, 115V

MEMMERT UN 110 drying oven with forced convection 300°C Equipment never used, decommissioned In its  (more)original packaging. Year of manufacture: 2024 Model: UN110 drying oven / incubator - new generation Capacity: 108 liters Temperature range: Ambient +10°C / +300°C Integrated digital temperature display 2 stainless steel shelves Power supply: 230 V Frequency: 50-60 Hz Power: 2800 W External dimensions (W) x (D) x (H): 745 x 584(+56) x 864 mm Internal dimensions (W) x (D) x (H): 560 x 400 x 480 mm Weight: 74 kg SingleDISPLAY

DO305 Karl Fischer drying oven is ideal for the accurate determination of the water content of solid (more) or viscous samples, such as: Substances that release the water only at a high temperature, such as plastic in powder or granular form     Substances that cause lateral reactions with the Karl Fischer reagent, such as oxidizing inorganic salts     Substances that cause problems in the titration vessel because of their consistency, such as fibrous or pasty substances     Substances that are poorly soluble or insoluble, such as wool, dough, tar and coal

Yamato DNE-601 Programmable Energy Saving Forced Convection Oven 150L, 115V Temperature Range Ambie (more)nt +20°C to 210°C Temperature Distribution Accuracy ± 2.0°C (at 210°C) Chamber Volume 150L Features - High precision controller allows high performance temperature control and display of CO2 and power discharge - Heat tightness and insulation design of the chamber achieves an energy saving rate of about 40% at constant temperature compared to previous models - Maximum temperature reaching time reduced by 15 minutes (no-load) compared to previous models - Program operation with a maximum of 99 steps, 99 patterns repeatable - Standard equipped with various support functions such as calibration offset, power failure recovery mode, save and access of user setting information, as well as other operation modes - Data acquisition from internal test device possible because of cable holes - Easy system upgrade with various option settings Energy saving, programmable 150L forced convection eco-oven with lower power consumption and CO2 emission. High precision controller allows high performance temperature control and display of CO₂ and power discharge. Program operation with a maximum of 99 steps, 99 patterns repeatable. Standard equipped with various support functions such as calibration offset, power failure recovery mode, save and access of user setting information, as well as other operation modes. Data acquisition from internal test devices is possible because of cable holes. Easy system upgrade with various option settings. Operating temp ambient +20~210°C. INCLUDED: The Yamato DNE-601 Programmable Energy Saving Forced Convection Oven 150L, 115V includes: - 2 x Shelves w/ Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Memmert UF75 Forced Circulation Oven 74L, 115V Working Temperature Range Min. 10°C above ambient up (more) to +300°C Oven Type Forced Air Circulation Chamber Volume 74 L (2.61 cu.ft.) Features - Setting temperature range from +20 to +300°C with a working range of at least 10°C above ambient up to +300°C - Internal volume of 74 L (2.61 cu.ft.) for versatile applications - Precise control with a 1 Pt100 sensor DIN Class A in a 4-wire circuit and 0.1°C setting resolution up to 99.9°C - ControlCOCKPIT with adaptive digital PID-microprocessor control and a high-definition TFT-color display - Forced air circulation by a quiet air turbine, adjustable in 10% steps for optimal temperature distribution - Easy-to-clean stainless steel interior with reinforced ribbing and integrated heating on four sides - AtmoCONTROL software for data logging and program management via USB or Ethernet interface - Fully insulated stainless steel door with 2-point locking and inner glass door for secure access The Memmert UF75 Forced Circulation Oven 74L, 115V is designed for precise and reliable temperature control, making it ideal for a variety of laboratory and industrial applications. It features a setting temperature range of +20°C to +300°C, with a working temperature range of at least 10°C above ambient up to +300°C. Equipped with a high-definition TFT-color display, the ControlCOCKPIT system offers adaptive digital PID-microprocessor control for seamless operation. The oven incorporates a 1 Pt100 temperature sensor in a 4-wire circuit, ensuring accurate monitoring and control with a resolution of 0.1°C up to 99.9°C. For added flexibility, users can adjust critical parameters such as temperature (Celsius or Fahrenheit), fan speed, air flap position, program time, and even set time zones and daylight savings time. This model is engineered for efficiency and durability, featuring forced air circulation with a quiet air turbine adjustable in 10% increments to maintain uniform temperature distribution. The easy-to-clean stainless steel interior is reinforced with deep-drawn ribbing and protected large-area heating on all four sides, offering long-term reliability and hygiene. The oven includes two stainless steel grids and can accommodate up to six shelves, each capable of supporting up to 44 lbs (20 kg). For added convenience, the AtmoCONTROL software allows for data logging, programming, and transferring programs via USB or Ethernet. With a fully insulated stainless steel door with a 2-point locking system and inner glass door, the Memmert UF75 ensures secure and energy-efficient operation for any professional environment. INCLUDED: TheMemmert UF75 Forced Circulation Oven 74L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert UN75plus Natural Convection Oven 74L, 115V Setting Temperature Range +20°C to +300°C Convec (more)tion Type Natural Convection Chamber Volume 74 L (2.6 cu.ft.) Features - 74L internal volume for versatile sample sizes - Precise temperature control from +5°C above ambient to +300°C for a wide range of applications - Equipped with TwinDISPLAY, featuring two high-definition TFT-color displays for advanced control - 2 Pt100 sensors in a 4-wire circuit for reliable temperature monitoring and control - Natural convection for uniform temperature distribution without forced airflow - Pre-heated fresh air admixture with electronically adjustable air flap for optimal temperature uniformity - Comprehensive safety features, including AutoSAFETY with over- and undertemperature monitoring - Easy-to-clean stainless steel interior reinforced by deep-drawn ribbing for durability and hygiene The Memmert UN75plus Natural Convection Oven 74L, 115V offers exceptional performance for temperature-sensitive applications, with a large 74L internal volume to accommodate a wide range of samples. This advanced laboratory oven features precise temperature control, with a working temperature range of +5°C above ambient up to +300°C. Its highly accurate 2 Pt100 sensors in a 4-wire circuit ensure consistent temperature readings, while the TwinDISPLAY digital PID-microprocessor controller with two high-definition TFT-color displays provides intuitive adjustments and real-time feedback. Designed for efficiency, the Memmert UN75plus includes natural convection for even heat distribution, as well as the option to adjust the airflow with an electronically adjustable air flap. The durable, easy-to-clean stainless steel interior, reinforced by deep-drawn ribbing, ensures long-lasting performance and hygiene. Safety features such as the overtemperature monitor, mechanical temperature limiter, and integrated AutoSAFETY system protect against overheating, while the AtmoCONTROL software allows remote monitoring and data logging for precise control and documentation. INCLUDED: TheMemmert UN75plus Natural Convection Oven 74L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

This listing is for 1 of 2 Watson Marlow SCIQ 323 Peristaltic Pump. The unit is in full working con (more)dition and is ready for immediate release. The Sci-Q 323 range is designed exclusively for scientific pumping needs, and brings a stunning level of performance and quality to the bench top.   323S high-performance manual control variable speed pump • High-performance microprocessor controlled pumps • 323S can be extended with 313X extension pump heads to five channels • Flow rates to 2000ml/min and 133:1 speed control ratio   323S speed adjusts in 1rpm steps from 3 to 400rpm. keypad lock prevents tampering or accidental changes, auto restart for mains failure recovery, switchable between 100-120V or 220-240V, MemoDose facility for accurate single shot dosing.   323S drives may also be fitted with 314 four roller pump heads if lower pulsing is required, or with 313D2 or 314D2 pump heads which accept 2.4mm wall thickness tubing for higher pressure operation or pumping more viscous fluids.   For low-flow pumping, up to ten channels, 323S drives may be fitted with 314MC (four-roller) micro-cassette pump heads, which can be extended to ten channels by adding one 314MCX or 318MCX extension pump head. This pump is fitted with one 314MC head and will be supplied with an additional spare 314MC as per images   Serial# H041702   Dims 27cm (D) x 22cm (W) x 12cm (H)

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The mass standard is the foundation of accurate mass measurement, as it affects the quality and reli (more)ability of results in many areas. Its role in maintaining uniformity and in meeting measurement standards is crucial, making the mass standard an indispensable metrology component. Cylindrical Shape: The cylindrical shape of the standards ensures ease of handling and precise placement on weighing platforms. Plastic Packaging: The weights are delivered in a durable plastic case, ensuring their safe storage and transport. Set Includes: 16 mass standards, 2 pairs of tweezers, 2 brushes and 1 pair of gloves.

Accuris AP1096 IsoPure 96 Automated Purification System Sample Capacity 96 Samples / 50ul to 1000ul  (more)Display 7.0 Inch Color Touch Screen Program Memory 100 Programs (Internal Memory) Features - Compatible with all popular magnetic bead kits - Touch screen panel for on-board programming and operation - Process up to 96 samples in deep-well plates - 8-position carousel with 2 heating blocks - Sample volumes from 50µl to 1000µl - Lysis and elution temperature range of Ambient +5°C to 120°C - Variable mixing speeds with 10 levels to select from - Ultraviolet sterilization lamp (UVC) inside the processing chamber provides effective elimination of most bacterial, viral and stray genomic DNA contaminants The Accuris AP1096 IsoPure 96 Automated Purification System is a high throughput, automated system that improves the efficiency and reproducibility of magnetic bead-based purification protocols. Capable of processing up to 96 samples at one time, the instrument is easy to set up and program. Mixing, magnetic bead transfer, washing, and elution steps are performed automatically. The purification process can be completed within 10 to 60 minutes depending on the type of reagent kit used and complexity of the program. The IsoPure™ 96 can be programmed by using the color touch screen or the included mouse. After a protocol has been created, the instrument will calculate and display the estimated time for each step and the total time. Typical step settings include: - Tip Comb Loading and Unloading: Automate tip comb loading and unloading by designating the respective plate positions in the script. - Mixing: Parameters for mixing time, speed, and amplitude can be programmed for each step of the protocol. - Temperature Control: Heating of the sample mixture during the lysis and elution steps significantly improves the purity and yield of the target molecule. The IsoPure 96 is equipped with 2 heating blocks on the plate carousel that can be precisely set to temperatures from ambient + 5°C to 120°C. IsoPure deep well plates fit into the heating blocks for efficient heat transfer. A cooling fan inside the processing chamber maintains the ambient operating temperature to ensure consistent results. - Bead Collection and Release: The complete collection of magnetic beads from sample mixtures is crucial for maximizing the yield of purified analytes. The IsoPure software offers full control of magnetic parameters to ensure cleaner extractions. General settings allow control of magnet speed, position, repeat collection cycles, etc, to guarantee consistent yields. Accuris Instruments has partnered with leading magnetic bead kit manufacturers to develop and optimize protocols for specific applications. To request scripts for specific kits, or for assistance in optimization, please contact us. An ultraviolet sterilization lamp (UVC) inside the processing chamber provides effective elimination of most bacterial, viral and stray genomic DNA contaminants. This additional safeguard reduces the possibility of unwanted DNA/RNA contamination of critical samples that could be amplified downstream in a PCR detection assay. UV sterilization time can be adjusted based on specific program requirements to ensure a sterile environment prior to purification. The IsoPure 96 can store up to 100 program files which can be transferred between instruments, or to a computer for storage or sharing. Simply insert the included flash drive to export the selected files. Programming control can be done via the touch screen, or by using the included mouse. A PC can also be connected for remote programming. Accuris offers high-quality deep well plates and magnetic tip combs designed to fit the IsoPure 96. Produced using virgin polypropylene and packaged in a sterile facility, these consumables are guaranteed to be contaminant-free. The IsoPure 96 also accepts industry-standard 96 deep well plates and tip combs designed for high throughput purification systems. INCLUDED: The Accuris AP1096 IsoPure 96 Automated Purification System includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty