Thermo Affymetrix Genechip Hybridization Oven Model 645 Hybridisierungsofen

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Yamato ADP-200C Benchtop Vacuum Oven 10L, 115V Operating Temperature Range 40~240°C Operating Pres (more)sure Range 101 - 0.1kPa (760 - 1 Torr) Internal Capacity 10L Features - Easy input of parameters and settings - Digital PID controller supports fixed temperature, quick auto-stop, auto stop, auto start and program operations. - Self-diagnostic and overheating prevention functions - Silicon rubber door seal prevents air from leaking - Independent over heating prevention device for each circuit - Customizable with N₂ gas inlet and communication ports - Calibration off-set function - Easy maintenance Introducing our Yamato Programmable Vacuum Drying Oven, a compact and versatile solution ideal for laboratory settings. This 10L, 115V oven offers advanced features designed to enhance safety and efficiency. With easy parameter input and a digital PID controller supporting various temperature modes, including fixed temperature, quick auto-stop, auto-start, and program operations, your experiments will run smoothly. Safety is paramount with self-diagnostic and overheating prevention functions, while the silicon rubber door seal ensures an airtight chamber. Individual overheating prevention devices for each circuit add an extra layer of protection, and the oven is customizable with N₂ gas inlet and communication ports. Plus, the calibration offset function ensures precision, and easy maintenance keeps your equipment in top condition. Safety features include sensor trouble detection, SSR, short circuit detection, heater disconnecting detection, memory error prevention, and temperature measurement error prevention.INCLUDED: The Yamato ADP-200C Benchtop Vacuum Oven 10L, 115V includes: - Shelf Plate (2 pcs.) - Power Cord - One Year Manufacturer's Warranty

Yamato DKN-602C Programmable Forced Convection Oven 150L, 115V Temperature Range Ambient +10°C to 2 (more)60°C Temperature Distribution Accuracy ± 2.5°C (at 210°C) Chamber Volume 150L Features - Best seller based on excellent performance and affordability - Superior temperature accuracy - DKN302C/312C/402C/412C/602C/612C models come with observation windows - Programmable PID controller for easy program settings (30-step, 3-pattern program controller with repeat functions) - Fixed setting, Quick Auto stop, Auto stop, Auto start, Program operating modes with easy control capabilities - Increased safety and self-diagnostic functions - Overheating prevention and calibration off-set are possible with auxiliary functions - Easy to use and maintain - Built in exhaust ports Programmable 150L forced convection constant temperature oven with extended functions and safety features. Bestseller based on excellent performance and affordability. Superior temperature accuracy. Comes with an observation window. Programmable PID controller for easy program settings (30-step, 3-pattern program controller with repeat functions). Fixed setting, Quick Auto stop, Auto stop, Auto start, Program operating modes with easy control capabilities. Overheating prevention and calibration off-set are possible with auxiliary functions. Easy to use and maintain. Equipped with built in exhaust ports. Operating temp ambient +10~260°C. INCLUDED: The Yamato DKN-602C Programmable Forced Convection Oven 150L, 115V includes: - 2 x Shelves w/ Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Sorvall OTD-COMBI Ultracentrifuge Lab This item was removed from a university where it was surplus t (more)o requirement. It is in reasonably good cosmetic condition and powers on. However, the door unlock switch is non-functional, therefore, preventing the unit's ability to lock or open the door. We were able to open it manually, but the automatic door open function is faulty. Therefore, it is listed as Spares/Repair. Also includes the following: Dupont Instruments Sorvall T-865.1 Rotor.Serial No: 9330329. 8 Hole rotor.Tube dimensions: 1.5cm x 8cm.

Huber 2 Litre Water Bath w/ Polystat CC3 Thermostat Lab This item was removed from a university wher (more)e it was surplus to requirement. The unit powers up and is in good working order (thermometer not included).

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

IKA DB 8.1 Cuvettes 2 x 6 Dry Block (12.5 mm cuvettes)