Memmert UN55PA Natural Convection Paraffin Oven 53L, 115V

Techne Hybridiser HB-1 Hybridisation Oven This item was removed from a university lab where it was s (more)urplus to requirements. The unit powers up and is in full working order. It was tested with a digital thermometer (not included). It is in good cosmetic condition.

This Advanced Cell Diagnostics HybEZ Oven  Cat no. 241000ACD-2 was removed from a university la (more)b where ti was surplus to requirements. The unit powers up and has been tested with a digital thermometer (not included). When set to 37˚C the thermometer measured 45.6˚C.When set to 74.9˚C (max) the display showed 74.9˚C and the thermometer measured 80˚C. It is in reasonably good cosmetic condition with some marks from use.

Yamato DNE-601 Programmable Energy Saving Forced Convection Oven 150L, 115V Temperature Range Ambie (more)nt +20°C to 210°C Temperature Distribution Accuracy ± 2.0°C (at 210°C) Chamber Volume 150L Features - High precision controller allows high performance temperature control and display of CO2 and power discharge - Heat tightness and insulation design of the chamber achieves an energy saving rate of about 40% at constant temperature compared to previous models - Maximum temperature reaching time reduced by 15 minutes (no-load) compared to previous models - Program operation with a maximum of 99 steps, 99 patterns repeatable - Standard equipped with various support functions such as calibration offset, power failure recovery mode, save and access of user setting information, as well as other operation modes - Data acquisition from internal test device possible because of cable holes - Easy system upgrade with various option settings Energy saving, programmable 150L forced convection eco-oven with lower power consumption and CO2 emission. High precision controller allows high performance temperature control and display of CO₂ and power discharge. Program operation with a maximum of 99 steps, 99 patterns repeatable. Standard equipped with various support functions such as calibration offset, power failure recovery mode, save and access of user setting information, as well as other operation modes. Data acquisition from internal test devices is possible because of cable holes. Easy system upgrade with various option settings. Operating temp ambient +20~210°C. INCLUDED: The Yamato DNE-601 Programmable Energy Saving Forced Convection Oven 150L, 115V includes: - 2 x Shelves w/ Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Memmert UF75 Forced Circulation Oven 74L, 115V Working Temperature Range Min. 10°C above ambient up (more) to +300°C Oven Type Forced Air Circulation Chamber Volume 74 L (2.61 cu.ft.) Features - Setting temperature range from +20 to +300°C with a working range of at least 10°C above ambient up to +300°C - Internal volume of 74 L (2.61 cu.ft.) for versatile applications - Precise control with a 1 Pt100 sensor DIN Class A in a 4-wire circuit and 0.1°C setting resolution up to 99.9°C - ControlCOCKPIT with adaptive digital PID-microprocessor control and a high-definition TFT-color display - Forced air circulation by a quiet air turbine, adjustable in 10% steps for optimal temperature distribution - Easy-to-clean stainless steel interior with reinforced ribbing and integrated heating on four sides - AtmoCONTROL software for data logging and program management via USB or Ethernet interface - Fully insulated stainless steel door with 2-point locking and inner glass door for secure access The Memmert UF75 Forced Circulation Oven 74L, 115V is designed for precise and reliable temperature control, making it ideal for a variety of laboratory and industrial applications. It features a setting temperature range of +20°C to +300°C, with a working temperature range of at least 10°C above ambient up to +300°C. Equipped with a high-definition TFT-color display, the ControlCOCKPIT system offers adaptive digital PID-microprocessor control for seamless operation. The oven incorporates a 1 Pt100 temperature sensor in a 4-wire circuit, ensuring accurate monitoring and control with a resolution of 0.1°C up to 99.9°C. For added flexibility, users can adjust critical parameters such as temperature (Celsius or Fahrenheit), fan speed, air flap position, program time, and even set time zones and daylight savings time. This model is engineered for efficiency and durability, featuring forced air circulation with a quiet air turbine adjustable in 10% increments to maintain uniform temperature distribution. The easy-to-clean stainless steel interior is reinforced with deep-drawn ribbing and protected large-area heating on all four sides, offering long-term reliability and hygiene. The oven includes two stainless steel grids and can accommodate up to six shelves, each capable of supporting up to 44 lbs (20 kg). For added convenience, the AtmoCONTROL software allows for data logging, programming, and transferring programs via USB or Ethernet. With a fully insulated stainless steel door with a 2-point locking system and inner glass door, the Memmert UF75 ensures secure and energy-efficient operation for any professional environment. INCLUDED: TheMemmert UF75 Forced Circulation Oven 74L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert UF260plus Forced Circulation Oven 256L, 115V Working Temperature Range Min. 10°C above ambi (more)ent up to +300°C Oven Type Forced Air Circulation Chamber Volume 256 L (9.04 cu.ft.) Features - Working temperature range from Min 10°C above ambient up to +300°C, with a high-resolution display - Volume of 256 L (9.04 cu.ft.), offering ample space for various applications - TwinDISPLAY with multifunctional digital PID-microprocessor controller and dual high-definition TFT-color displays - Comprehensive safety mechanisms including overtemperature monitor TWW, adjustable temperature limiter TWB, and mechanical temperature limiter TB - Function SetpointWAIT ensures processing only begins once the target temperature is reached - AtmoCONTROL software on a USB stick allows for advanced programming, management, and data transfer via Ethernet or USB port - AutoSAFETY features integrated over- and undertemperature monitoring "ASF", automatically adjusting and providing alarms for any temperature deviations - Stainless steel interior with deep drawn ribbing and integrated heating on four sides, designed for easy cleaning and durability The Memmert UF260plus Forced Circulation Oven 256L, 115V provides a large working chamber with a capacity of 256L (9.04 cu.ft.), making it ideal for a wide range of applications that require precise thermal processing. With a working temperature range from 10°C above ambient up to +300°C, and high-resolution displays for monitoring, this oven ensures accuracy and flexibility in temperature settings. Equipped with the advanced TwinDISPLAY system, featuring dual high-definition TFT-color displays and a multifunctional PID-microprocessor controller, users can easily control parameters such as fan speed, air flap position, and program time. The Function SetpointWAIT ensures that the process only begins once the desired temperature is reached, enhancing operational efficiency. Safety is a top priority in the UF260plus, with features like an overtemperature monitor (TWW), adjustable temperature limiter (TWB), and a mechanical temperature limiter (TB), all designed to prevent overheating. The AutoSAFETY system includes integrated over- and undertemperature monitoring "ASF," which adjusts automatically and provides alarms in case of temperature deviations. This oven's stainless steel interior, reinforced with deep-drawn ribbing and integrated heating on four sides, ensures even heat distribution and easy cleaning. Advanced AtmoCONTROL software allows for seamless programming and data management via USB or Ethernet, making the UF260plus an excellent choice for professionals requiring reliability and precision in thermal processing. INCLUDED: TheMemmert UF260plus Forced Circulation Oven 256L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert UN55PA Natural Convection Paraffin Oven 53L, 115V Setting Temperature Range +20°C to +80°C (more) Setting Temperature Accuracy 0.1 °C Chamber Volume 53 L (1.9 cu. ft.) Features - 53 L (1.9 cu. ft.) internal volume with ample capacity - Temperature range from +20°C to +80°C with natural convection - High accuracy with 0.1 °C temperature setting resolution - Equipped with two Pt100 sensors for precise monitoring and fault tolerance - TwinDISPLAY with adaptive PID-microprocessor control and dual TFT displays - AutoSAFETY with integrated over- and undertemperature monitoring and alarms - Fully insulated stainless steel door with 2-point locking system - AtmoCONTROL software for programming via USB or Ethernet interface The Memmert UN55PA Natural Convection Paraffin Oven 53L, 115V, offers a spacious 53-liter (1.9 cu. ft.) chamber ideal for precise paraffin applications and reliable temperature control. Operating within a temperature range of +20°C to +80°C, this oven features natural convection to provide even heat distribution without the need for forced airflow. Its highly accurate 0.1°C temperature setting resolution is maintained by dual Pt100 sensors, ensuring consistent performance with integrated fault tolerance for added security. The adaptive PID-microprocessor controller with TwinDISPLAY and dual high-definition TFT displays allows for intuitive control, precise adjustments, and continuous performance monitoring. This oven is equipped with advanced safety features, including the AutoSAFETY system, which offers automatic over- and undertemperature protection with visual and acoustic alarms to prevent overheating. The robust stainless steel interior is easy to clean and reinforced for durability, while the fully insulated stainless steel door with a 2-point locking system ensures an airtight seal. For ease of programming and monitoring, the AtmoCONTROL software is included, allowing users to manage settings and transfer programs via USB or Ethernet. The UN55PA is built for efficiency, reliability, and the highest standards of paraffin application. INCLUDED: TheMemmert UN55PA Natural Convection Paraffin Oven 53L, 115V includes: - 1 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Spectra Physics  2020 2025-45 Laser w/ 2560 Power Supply & 2270 Control Box This system wa (more)s removed from a university lab where it was surplus to requirements. Included are; 1 x Spectra Physics Laser Model 2025-45The unit is in good cosmetic condition but we were not able to power on the unit as it had been hardwired and disconnected from its previous location. 1 x Spectra Physics Power supply Model 2560We were unable to power this up as it has been previously hard wired. It is in good cosmetic condition but has marks from dust and grime. The unit is supplied with Keys. 1 x Spectra Physics Control Box Model 2270The unit is in good cosmetic condition but we were not able to power the unit as the power supply powers the unit.

This listing is for a Qiagen QX Buffer Tray.The unit is in full working condition and is ready for i (more)mmediate release.The Qiagen QX Buffer Tray is an essential component of the QIAxcel DNA Kits, specifically engineered for streamlined automated DNA fragment analysis using the QIAxcel instrument.Key Features:Pre-Filled Buffers:The buffer tray comes pre-filled with all necessary buffers required for DNA fragment analysis, including the proprietary QX Buffer essential for optimal performance.Compatibility:Specifically designed to be compatible with the QIAxcel instruments, ensuring seamless integration and operation.Part of QIAxcel DNA Kits:It is a fundamental part of the QIAxcel DNA Kits, facilitating automated processes for reliable and consistent DNA analysis.Proprietary QX Buffer:The QX Buffer enhances the analytical capabilities of the QIAxcel System, improving resolution and accuracy in DNA fragment sizing.Usage Instructions:Loading:Begin by loading the gel cartridge along with the pre-filled buffer tray into the QIAxcel instrument.Filling:Follow the manufacturer’s instructions to ensure the buffer tray is filled and loaded properly, which is crucial for accurate results.Process Selection:Select the desired process profile on the instrument for the type of analysis you wish to conduct.Analysis Run:The QIAxcel instrument will automatically dispense the buffers from the tray and perform the DNA fragment analysis, streamlining the workflow.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

BrandTech Scientific Transferpette S-8 Multichannel M8-50, 5 to 50ul Pipette Volume Range 5 to 50 ul (more) Accuracy 0.8% / 0.40 ul at 50 ul Pipette Type Air Displacement Features - Ergonomic design ensures a comfortable grip for all hand sizes and both right- and left-handed users - True one-handed operation allows for easy volume setting, pipetting, and tip ejection without changing grip - Low operating forces and short stroke enable relaxed pipetting during extended use - Volume-change protection prevents accidental adjustments and is easy to operate even with gloves - Easy Calibration technology allows quick, tool-free calibration for consistent accuracy - 360° rotating pipetting unit for personalized comfort and flexible operation - O-ring system ensures easy mounting and ejection of tips, reducing strain during use - Individually removable nose cones and seals for easy cleaning and maintenance The BrandTech Scientific Transferpette S-8 Multichannel M8-50, 5 to 50 ul Pipette is engineered for precision and efficiency in high-throughput liquid handling applications. Designed for use with microplates and PCR plates, this 8-channel air displacement pipette covers a versatile volume range of 5 to 50 ul, making it ideal for various laboratory workflows. The ergonomic design ensures a comfortable grip for both right- and left-handed users, while low operating forces and a short stroke provide fatigue-free pipetting during extended sessions. True one-handed operation allows seamless volume adjustment, pipetting, and tip ejection without changing grip, streamlining workflow and improving efficiency. The integrated volume-change protection prevents accidental adjustments, ensuring accurate and reproducible results. Easy Calibration technology allows quick, tool-free recalibration to maintain consistent performance over time. The optimized design features individual O-rings for easy tip mounting and ejection, reducing strain on the user. Built for durability, the Transferpette S-8 is highly resistant to chemicals and UV exposure, making it a reliable solution for consistent, high-precision pipetting in any demanding lab environment.Click Here to View Product Video INCLUDED: The BrandTech Scientific Transferpette S-8 Multichannel M8-50, 5 to 50ul Pipette includes: - 2 x TipBox - Shelf Mount - Reagent Reservoir - Mounting Wrench - Silicone Grease - 1 Set of Shaft Seals - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty