Memmert UN160 Natural Convection Oven 161L, 115V

This listing is for a Genlab M6CV Incubator Oven. The unit is in full working condition and is read (more)y for immediate release. GENLAB Classic Incubators Overview The GENLAB Classic Incubators are designed for efficiency and reliability, serving a variety of biological analysis, research, and general laboratory applications. Their user-friendly thermostat system makes them easy to operate, and they can be customized to meet specific needs. Specifications: Sizes Available: Ranges from 6 to 100 liters, accommodating different laboratory needs. Temperature Range: Natural Convection: Ambient +5ºC to 70ºC Fan-Assisted: Ambient +8ºC to 70ºC Temperature Fluctuation: Maintains a fluctuation of ±0.25ºC at 37ºC, ensuring precise environmental conditions for sensitive samples. Control System: Easy-to-Use Thermostatic Control: Streamlined for straightforward operation. Independent Overheat Thermostat: Provides an additional safety layer to prevent overheating. Design Features: Exterior: Made from sheet steel with an easy-to-clean powder-coated finish, ensuring durability and cleanliness. Interior Chamber: Standard mild steel coated with aluminum (CLAD), with stainless steel as an optional upgrade for enhanced corrosion resistance. Shelving: Equipped with fixed shelf runners and removable chrome-plated wire grid shelves for flexible sample storage. Insulated Door: Comes standard to minimize heat loss and improve energy efficiency.

This item has just arrived in our stock. Please enquire for further details.

Yamato FO-410CR Muffle Furnace with Communication Port 9L, 220V Operating Temperature Range 100°C t (more)o 1150°C Max. Temperature Reaching Time ~70min. Internal Capacity 9L Features - Easy-to-use controller - Communication ports - High-temperature accuracy at ±2.0°C - Upgraded with long life R-thermocouple sensors - Excellent heat tightness with a firmly sealed chamber door - Program operation of a maximum of 6 patterns: 30 steps x 1 pattern, 15 steps x 2 patterns, or 10 steps x 3 patterns - Self-diagnostic functions, calibration off-set, lock function, auto-recovery after power failure, earth leakage breaker, and automatic overheat prevention device Standard 9L muffle furnace using microprocessor-controlled thermo-regulator characterized by excellent repeatability. Used for high temperature applications such as fusing glass, creating enamel coatings, ceramics and soldering and brazing metals. Easy to use controller. Excellent heat tightness with a firmly sealed chamber door. High temperature accuracy at ±2.0°C. Program operation of maximum of 6 patterns: 30 steps x 1 pattern, 15 steps x 2 patterns or 10 steps x 3 patterns. Safety features include self-diagnostic functions, calibration off-set, lock function, auto-recovery after power failure, earth leakage breaker and automatic overheat prevention device. Selectable options include exhaust system unit, N₂ gas loading device (with flow meter), temperature output terminal, time up/alarm output terminal and sample tray. Upgraded with long life R-thermocouple sensors. Designed with communication port. Temperature range: 100~1150°C. INCLUDED: The Yamato FO-410CR Muffle Furnace with Communication Port 9L, 220V includes: - Exhaust port cap 1 pc. - Power Cord - Operator's Manual - Manufacturer's Documentation - Year Manufacturer's Warranty

Memmert UF75 Forced Circulation Oven 74L, 115V Working Temperature Range Min. 10°C above ambient up (more) to +300°C Oven Type Forced Air Circulation Chamber Volume 74 L (2.61 cu.ft.) Features - Setting temperature range from +20 to +300°C with a working range of at least 10°C above ambient up to +300°C - Internal volume of 74 L (2.61 cu.ft.) for versatile applications - Precise control with a 1 Pt100 sensor DIN Class A in a 4-wire circuit and 0.1°C setting resolution up to 99.9°C - ControlCOCKPIT with adaptive digital PID-microprocessor control and a high-definition TFT-color display - Forced air circulation by a quiet air turbine, adjustable in 10% steps for optimal temperature distribution - Easy-to-clean stainless steel interior with reinforced ribbing and integrated heating on four sides - AtmoCONTROL software for data logging and program management via USB or Ethernet interface - Fully insulated stainless steel door with 2-point locking and inner glass door for secure access The Memmert UF75 Forced Circulation Oven 74L, 115V is designed for precise and reliable temperature control, making it ideal for a variety of laboratory and industrial applications. It features a setting temperature range of +20°C to +300°C, with a working temperature range of at least 10°C above ambient up to +300°C. Equipped with a high-definition TFT-color display, the ControlCOCKPIT system offers adaptive digital PID-microprocessor control for seamless operation. The oven incorporates a 1 Pt100 temperature sensor in a 4-wire circuit, ensuring accurate monitoring and control with a resolution of 0.1°C up to 99.9°C. For added flexibility, users can adjust critical parameters such as temperature (Celsius or Fahrenheit), fan speed, air flap position, program time, and even set time zones and daylight savings time. This model is engineered for efficiency and durability, featuring forced air circulation with a quiet air turbine adjustable in 10% increments to maintain uniform temperature distribution. The easy-to-clean stainless steel interior is reinforced with deep-drawn ribbing and protected large-area heating on all four sides, offering long-term reliability and hygiene. The oven includes two stainless steel grids and can accommodate up to six shelves, each capable of supporting up to 44 lbs (20 kg). For added convenience, the AtmoCONTROL software allows for data logging, programming, and transferring programs via USB or Ethernet. With a fully insulated stainless steel door with a 2-point locking system and inner glass door, the Memmert UF75 ensures secure and energy-efficient operation for any professional environment. INCLUDED: TheMemmert UF75 Forced Circulation Oven 74L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

The new Falc Instruments laboratory instruments improved the construction quality of the structure a (more)nd are completed with a touch screen panel. Falc laboratory ovens are widely used in thermostatic applications requiring high precision. These instruments are ideal for various operations, such as drying and sterilizing laboratory glassware, as well as for material strength testing. Depending on your specific needs, you can choose a model with or without ventilation, based on the level of accuracy required. Unlike incubators, laboratory ovens can reach high temperatures, up to 300°C. The characteristics of the new Falc models: - Touch screen display - 4 language setting - Digital timer - Program saving function - Programmable delayed start Why choose the STF-N 52T model? Being the most compact stove in the series, it adapts perfectly to your laboratory, taking up minimal space on the workbench and ensuring simple, clutter-free integration. For over 50 years, Falc products have stood out for their solid and simple construction, guaranteeing durability and reliability over time. The new models have been updated with a touchscreen control panel, which simultaneously displays temperature, humidity and timer. The novelties and classics of the new Falc models: 1 - Silicone gasket: adheres perfectly to the door to maintain the set temperature, preventing heat loss and variations inside the chamber. 2 - Internal chamber made of 18/8 stainless steel. Exteriors in steel painted with anti-acid epoxy powder. Internal glass door for incubators only. 3 - Ø10mm upper hole for inserting thermometers or probes for instrument calibration. 4 - Touchscreen control panel with 4 languages ​​(Italian - English - French - Spanish) and safety class 3.1 as standard. The control's advanced functions include saving programs (temperature/maintenance/ventilation) and delayed start (day, time). 5 - Ergonomic handle with key lock. Falc chemical laboratory stoves represent the excellence of Made in Italy in the scientific instrumentation sector. Designed and manufactured with the utmost care, these stoves combine advanced temperature control technologies with rugged stainless steel construction, ensuring reliable, long-lasting performance. The double internal stainless steel chamber, combined with the pre-heating system in the pre-chamber, ensures excellent uniformity of the temperature inside. Various accessories and customization options allow you to precisely adapt them to any specific application. - Ø40mm chimney on the back for smoke exhaust/cable passage. - Chimney Ø40mm on the back, with shutter opening adjustable from the control panel with opening from 0 to 40mm. - Wifi module for remote monitoring via APP. - Shelves in perforated sheet metal. - Grid shelves. - Tables and trolleys.

This Thermo Electron Forma Series II Water Jacketed CO2 Incubator 3141 was removed from a university (more) lab where it was surplus to requirements. The unit powers up and is in full working order. It is in reasonably good cosmetic condition with some marks from use. It is missing two feet on the right-hand side, but we can replace these on sale. 2 Shelves - 47 x 47cm

Corepoint Scientific PRF122WWW-0CAD Solid Door Combo 1C to 10C Refrigerator/-15C to -25C Freezer Tem (more)perature Setpoint Range Refrigerator: 1°C to 10°C / Freezer: -15°C to -25°C Capacity Refrigerator: 10.5 cu. ft. / Freezer: 1.0 cu. ft. Defrost Method Refrigerator: Cycle / Freezer: Controlled Auto Features - Compact, space-saving design with freestanding refrigerator and controlled auto defrost freezer combo - Separate microprocessor temperature controllers and digital displays for precise temperature management - Six adjustable refrigerator shelves and two adjustable freezer shelves with guard rails - Controlled auto defrost technology ensures stable temperatures, with a defrost cycle every 6 hours - CDC compliant patented frost-free technology for convenient frost removal - Audible and visual high/low temperature alarms with remote alarm contacts - Freestanding thermometer with 3-year calibration certificate and min/max memory - Keyed door locks, magnetic door gaskets, and integrated door handles for enhanced security - Environmentally friendly HFC-free refrigerant (R600a) and foam insulation The Corepoint Scientific PRF122WWW-0CAD Solid Door Combo offers a versatile 1°C to 10°C refrigerator and -15°C to -25°C controlled auto defrost freezer in a compact, space-saving design. This freestanding unit features separate microprocessor temperature controllers and digital displays for precise temperature management. The 12 cu. ft. capacity (10.5 cu. ft. refrigerator, 1.0 cu. ft. freezer) includes six adjustable shelves in the refrigerator and two in the freezer, all equipped with guard rails. The controlled auto defrost technology ensures vaccines remain at consistent, stable temperatures, with a defrost cycle every 6 hours. The unit is equipped with audible and visual alarms, remote alarm contacts, and a sample-simulated temperature probe. Additional features include a freestanding thermometer with a 3-year calibration certificate, keyed door locks, magnetic door gaskets, integrated door handles, leveling legs, stacking kit, LED interior light, two probe access ports, and environmentally friendly HFC-free refrigerant (R600a). This combo unit maximizes facility floor space while reducing long-term maintenance costs. INCLUDED: The Corepoint Scientific PRF122WWW-0CAD Solid Door Combo 1C to 10C Refrigerator/-15C to -25C Freezer includes: - Stacking Kit - Leveling Legs - Keys for Door Locks - 6 x Adjustable Shelves for Refrigerator - 2 x Adjustable Shelves for Freezer - Power Cord - Operator's Manual - 3 Year Manufacturer's Warranty

Heidolph Single-Channel Pump Head SP Vario Features: Suitable for most Heidolph tubing due to adjust (more)able roller spacing Convex rollers do not squeeze or crush organic cell cultures Pump head features ball bearings Rollers made of stainless steel and aluminum Depending on drive and tubing, the flow rate ranges from 2.0 to 4,151 ml per minute Click Here to View Product Video INCLUDED: The Heidolph Single-Channel Pump Head SP Vario includes: - 3 Year Manufacturer's Warranty

Scientific Industries Digital MicroPlate Genie PulseThe Digital MicroPlate Genie Pulse single positi (more)on microplate mixer features aggressive and uniform mixing of single microplates with speeds from 500 RPM to 3000 RPM and a shaking orbit of 1.0mm diameter. The Pulse “ON” and “OFF” times can be set from 0.1 seconds to 99 minutes for a more random motion and thorough mixing. The Digital MicroPlate Genie Pulse digital control and display of speed and time offers reproducibility and accuracy, with true speed display as well as fully programmable RUN/STOP modes. Accepts most microplate types, even in 384-well formats. The Digital MicroPlate Genie Pulse is new in the box . Includes: Power Cord Original Manufacturer Documentation Full 2 Year Parts and Labor Warranty Scientific Industries Digital MicroPlate Genie Pulse Specifications Speed 500-3000 RPM (750 – 2850 RPM for 230V models) Time 0 – 99 minutes or continuous Pulse-ON/OFF 0.1 seconds – 99 minutes Vortexing Orbit 1.0mm diameter Max. Capacity 1 microplate, any type with standard SBS footprint Dimensions (D x W x H) 165 x 165 x 165mm 6.5 x 6.5 x 6.5in Weight 2.75 Kg (6.1 lb)

The HX7.4N H scale is a device controlled by means of the PUE HX7 indicator, and it has been equippe (more)d with a 4-load-cell ramp platform made of stainless steel, AISI 304. This robust design facilitates weighing of heavy loads in humid environment. The ramps enable easy loading and unloading. Indicator with a colour 7” graphic display and a diode bar graph allow to observe visualisation of a current load mass presented in relation to the scale range or declared minimum and maximum thresholds. This makes the operation significantly easier. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety.

BD MAX System is intended for in vitro diagnostic (IVD) use in performing FDA cleared or approved nu (more)cleic acid testing in clinical laboratories. It is capable of automated extraction and purification of nucleic acids from multiple specimen types, as well as the automated amplification and detection of target nucleic acid sequences by fluorescence-based PCR. The BD MAX System is capable of: Independent nucleic acid extraction and purification PCR amplification using thermal cycling across 24 lanes Real time detection of products of amplification Identification of each Sample Buffer tube by external barcode reader Work List verification by internal barcode reader Fluorescence detection at up to five wavelengths, allowing multiplex reactions by Cycle threshold (Ct) call, or multiplex reactions by melt analysis Qualitative, quantitative and melt sample analysis Features: Integrated and fully-automated extraction and thermocycling steps Processes and analyzes up to 24 specimens per run On-board lysis and extraction with pre-filled reagent strips Real-time PCR with two 24-lane microfluidic PCR readers Dedicated multi-color optics including: 475/520, 530/565, 585/630, 630/665, 680/715 Consistent results through standardized workflow and protocols Rapidly expanding menu and open-system options to help address emerging testing needs Less than one minute of hands on time per sample CLIA Moderately complex and easy to use All-in-One computer contains instrument software that is responsible for instrument control, self-calibration, data analysis and storage User interface can be navigated with point-and-click icons (keyboard and mouse), or the Computer’s touchscreen Modules included: Temperature control/heating subsystem to control thermal cycling A liquid handling head to transfer samples from Sample Buffer tubes to Unitized Reagent Strips Onboard readers to measure the amplification reaction and report results Software/user interface allows for: 24 unique thermal cycling channels per system (two onboard readers) Entering patient/sample information, either manually or by external barcode reader Monitoring operations, communication and storing of data Qualitative, quantitative and melt sample analysis Error warnings Download of results to a USB thumb drive LIS connectivity Dimensions (HxWxD): 940 x 755 x 725 mm Weight: 113 kg