Memmert UF75 Forced Circulation Oven 74L, 115V

This item has just arrived in our stock. Please enquire for further details.

Yamato DNE-401 Programmable Energy Saving Forced Convection Oven 90L, 115V Temperature Range Ambien (more)t +20°C to 210°C Temperature Distribution Accuracy ± 2.0°C (at 210°C) Chamber Volume 90L Features - High precision controller allows high performance temperature control and display of CO2 and power discharge - Heat tightness and insulation design of the chamber achieves an energy saving rate of about 40% at constant temperature compared to previous models - Maximum temperature reaching time reduced by 15 minutes (no-load) compared to previous models - Program operation with a maximum of 99 steps, 99 patterns repeatable - Standard equipped with various support functions such as calibration offset, power failure recovery mode, save and access of user setting information, as well as other operation modes - Data acquisition from internal test device possible because of cable holes - Easy system upgrade with various option settings Energy saving, programmable 90L forced convection eco-oven with lower power consumption and CO2 emission. High precision controller allows high performance temperature control and display of CO₂ and power discharge. Program operation with a maximum of 99 steps, 99 patterns repeatable. Standard equipped with various support functions such as calibration offset, power failure recovery mode, save and access of user setting information, as well as other operation modes. Data acquisition from internal test devices is possible because of cable holes. Easy system upgrade with various option settings. Operating temp ambient +20~210°C. INCLUDED: The Yamato DNE-401 Programmable Energy Saving Forced Convection Oven 90L, 115V includes: - 2 x Shelves w/ Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

FISHER SCIENTIFIC FISHERBRAND DIEMOS ABV 175/80°C Drying Oven / Incubator with Forced Convection Dry (more)ing cabinet with motor-fan Capacity: 175 litres Vertical type External dimensions: (L) x (D) x (H): 69 x 71 x 103 cm Zinc-plated steel back Temperature range: 10°C above ambient temperature - up to +80°C 2 perforated stainless steel shelves Double doors (internet door and external door) 230 V 50/60 Hz 1000 W Weight: 70 Kg Tested at 37°C

BINDER KB-115 refrigerated incubator / drying oven with forced convection 100°C Model: KB115 refrige (more)rated and ventilated Capacity: 115 liters Temperature range: -5 ° C to 100 ° C Inner glass door Integrated digital temperature display 2 shelves Cable passage: Ø 30 mm (on the right wall) Power supply: 230 V, Frequency: 50-60 Hz, Power: 460 W, Internal dimensions: 60 x 40 x 48 cm Overall dimensions: 83 x 70 x 101 cm Weight: 106 kg Year of manufacture: 2010 Tested at 37°C and -2°C

HERAEUS B12 incubator / oven with natural convection 70°C Model: B12 Capacity: 131 Liters Temperatur (more)e range: Ambient +5°C / +70°C Integrated digital temperature display 2 stainless steel shelves Power supply: 230V Frequency: 50-60Hz Power: 470W External dimensions (W) x (D) x (H): 69.6 x 54 x 85cm Interior dimensions (W) x (D) x (H): 55.2 x 39 x 61cm Weight: 55kg interior glass door Tested at 37°C

BINDER CB210 Co2 Incubator / Drying Oven Nominal temperature: 187 ° C Internal volume: 210 l (CB 210 (more)) Temperature range: 7 to 60 ° C CO2 range: 0 to 20% CO2 volume Adjustment accuracy: 0.1% CO2 volume CO2 measurement: IR Nominal voltage: 230 V, single-phase unit Nominal current: 6.6 Amp Power frequency: 50/60 Hz External dimensions (W x H x D): 740 x 1069 x 715 mm Number of doors: 1 Number of internal glass doors: 1 Internal dimensions (W x H x D): 560 x 750 x 500 mm Number of perforated shelves made of stainless steel 1.4301 / V2A: 3 Shelf size (external) (W x D): 556 x 444 mm Empty weight: 121 kg Tested at 37°C CO2 at 5% (6.2% measured) Year of manufacture: 2003 Please note, slight modification to the door for padlock closure. See photos

Miele Dishwasher G7883 / Aqua Purifier G 7895 / Dosing unit DOS G60 Lab These items were removed fro (more)m a university lab, where they were surplus to requirement. All units are in good cosmetic condition and working order. Included are the following: - Miele Dishwasher Model: G 7883      L69cm x W60cm x H85cm - Aqua Purifier Model: G 7895      L60cm x W30cm x H87cm - Dosing Unit Model: DOS G60

Accuris Analytical Balance, series Tx, Internal Calibration w/ Touch Screen, 220gFeatures - The most (more) advanced balances in the Accuris line - Upgraded weighing performance by utilizing Electromagnetic Force Restoration (EFR) technology - High resolution thermal probe is incorporated into the EFR weigh cell, automatically compensating for fluctuating temperature - Fast response and stabilization times - 3 modes of calibration: external, internal, and automatic - Space saving design with more technology packed into a compact 8 x 15" footprint - Adjustable feet and leveling bubble to ensure correct installation and precise results Touch screen interface with easy to navigate icon-based menu and intuitive software for simplified operation Internal calibration only takes 60 seconds to complete, with automatic calibration available at timed intervals USB and RS232 interfaces are featured to easily transfer weighing results and connecting the optional thermal printer The Series Tx analytical balances are the most advanced in the Accuris line. The large, high resolution touch screen presents the user with an icon-based menu system and allows quick and intuitive access to a wide range of useful functions. A precisely engineered Electromagnetic Force Restoration (EFR) weigh cell accurately determines masses to sub milligram levels. Two models are available in the Tx Series: The W3102A-220 has a max capacity of 220g and readability of 0.1 mg. The W3002A-120 is a semi-micro class balance with a maximum capacity of 120g, and readability of 0.01mg up to 62g. The Tx internal calibration system helps ensure that the balance is always calibrated and ready for use. Auto calibration can also be set to occur at specific time intervals depending on user preference. A high resolution thermal probe is incorporated in the core of the EFR weigh cell, and if measured temperature fluctuates slightly, the balance will automatically compensate.A USB port on the side accepts a flash drives for storage of weighing data, which can then be transferred to a computer. Series Tx models have adjustable feet and a leveling bubble to ensure correct installation. Note: For optimal weighing performance, the Tx semi micro model must be installed on a suitably stable surface such as a marble slab table. Click Here to View Product Video INCLUDED: The Accuris Analytical Balance, series Tx, Internal Calibration w/ Touch Screen, 220g includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

High precision measurements The 2 g class E2 mass standard is a precision metrology tool, ideal for  (more)calibrating high-precision balances used in metrology, pharmaceutical, chemical laboratories and other research and industrial institutions. Product Features The ergonomic, cylindrical shape ensures ease of use and precise placement of the standard on the weighing platforms. Made from the best materials, it guarantees stability and resistance to changes in environmental conditions.

Pallet scales is stable and proved 4 load cell construction designed for weighing pallets. The load  (more)to be weighed can be placed on the platform by a standard fork-lift truck. Pallet scales H315/4P/H series is manufactured in stainless steel technology. The H315/4P/H series features wheels and handles for easy transporting the scales to its place of use. The scales comes standard with an indicator PUE H315 series featuring backlit LCD display and function buttons. The indicator is installed on a long cable. The scale is powered from mains 230V AC, RS 232 interface comes standard. Scales is available in dual range version on surcharge.

HX7 HR scale’s multi functions The HX7 HR scale is a device comprised of AISI 304 (IP66 / IP68 (more)) stainless steel terminal the PUE HX7, and AISI 316 (IP 68 / 69K) stainless steel weighing platform. The HX7 HR has been designed to operate in challenging conditions, even in places where the platform is exposed to acids. Display The 7” colour graphic display and the diode bar graph, which signals current net weight of a load in reference to the scale range or declared min, max thresholds, boost comfort especially in case of piecework where fast and precise presentation of product mass deviation is required with regard to the limit values. Hermetic communication interfaces Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the terminal at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. Software The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Terminal’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety.

It is the ideal solution for laboratories and institutions requiring the highest precision. The cyli (more)ndrical mass standards are made from the highest quality materials, ensuring their stability and resistance to changes in environmental conditions. This makes them perfect for the calibration of precise measuring instruments. Product Features: Highest Class of Accuracy: Class E1 is the highest standard of accuracy, making these standards ideal for calibrating precision measuring instruments. Cylindrical Shape: The cylindrical shape of the standards ensures ease of handling and precise placement on weighing platforms. Wooden Packaging: The standards are delivered in an elegant wooden box, which ensures their safe storage and transport. Set Includes: 13 mass standards, 2 pairs of tweezers, 2 brushes and 1 pair of gloves. Applications E1 class standards are ideal for the calibration and verification of precise analytical and laboratory balances, indispensable in metrology laboratories, as well as in research and industrial institutions where maintaining the highest standards of accuracy is necessary. By choosing the E1 class mass standard set from RADWAG, you invest in reliability, precision, and durability, which translates to excellent quality in your laboratory work.