Lab Oven STF-N 52T FALC

BINDER KB-115 refrigerated incubator / drying oven with forced convection 100°C Model: KB115 refrige (more)rated and ventilated Capacity: 115 liters Temperature range: -5 ° C to 100 ° C Inner glass door Integrated digital temperature display 2 shelves Power supply: 230 V, Frequency: 50-60 Hz, Power: 460 W, Internal dimensions: 60 x 40 x 48 cm Overall dimensions: 83 x 70 x 101 cm Weight: 106 kg Year of manufacture: 2005 Tested at 37 ° C and -2 ° C light friction at the stainless steel hooks when closing the door

BINDER KB-115 refrigerated incubator / oven with forced convection 100 ° C Model: KB115 refrigerated (more) and ventilated - NEW GENERATION Capacity: 115 liters Temperature range: -5 ° C to 100 ° C Inner glass door Integrated digital temperature display 2 shelves Cable passage: Ø 30 mm (on the right wall) Power supply: 230 V, Frequency: 50-60 Hz, Power: 700 W, Internal dimensions: 60 x 40 x 48 cm Overall dimensions: 83 x 70 x 101 cm Weight: 125 kg Year of manufacture: 2021 Tested at 37 ° C and -2 ° C

Yamato DX-302C Natural Convection Oven 28L, 115V Temperature Range Ambient +5°C to 300°C Temperatur (more)e Distribution Accuracy ± 10°C at 300°C Chamber Volume 28L Features - Economical and cost saving - Easy to use and maintain - Excellent temperature accuracy - Digital PID controller for easy operation with options for Fixed setting, Auto Start, Quick Auto Stop and Auto Stop - Increased safety and self-diagnostic functions - Calibration off-set function The Yamato DX-302C Natural Convection Oven is a cost-effective and user-friendly solution for precise temperature control needs. It features a digital PID controller with simple operation options, including Fixed setting, Auto Start, Quick Auto Stop, and Auto Stop. The oven operates within a temperature range of room temperature +5°C to 300°C, with a control accuracy of ±1°C and distribution accuracy of ±10°C at 300°C. It can reach its maximum temperature in approximately 45 minutes. Constructed with a robust stainless steel interior and an electro-galvanized steel sheet exterior coated with melamine resin, this 28L oven is easy to maintain. It's insulated with glass wool and uses a 0.9 kW iron-chrome wire heater. The oven includes two 33 mm exhaust ports on top, a microprocessor-controlled PID temperature controller, digital setting and display methods, and a versatile timer. Safety features include self-diagnostic functions, a key lock, hydraulic overheat prevention, and an electric leakage breaker. The internal dimensions are 300x310x300mm, and external dimensions are 400x440x630mm. It can support a shelf plate load of 15kg and offers six shelf rest steps with a 35mm pitch. The oven weighs about 23kg and is compatible with AC115V 9.5A making the Yamato DX-302C an ideal choice for various precision heating requirements. INCLUDED: The Yamato DX-302C Natural Convection Oven 28L, 115V includes: - 2 x Stainless Steel Punching Metal Shelves w/ Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Memmert UF75plus Forced Circulation Oven 74L, 115V Working Temperature Range Min. 10°C above ambien (more)t up to +300°C Oven Type Forced Air Circulation Chamber Volume 74 L (2.61 cu.ft.) Features - Working temperature range from Min 10°C above ambient up to +300°C, with a high-resolution display - Volume of 74 L (2.61 cu.ft.), offering ample space for various applications - TwinDISPLAY with multifunctional digital PID-microprocessor controller and dual high-definition TFT-color displays - Comprehensive safety mechanisms including overtemperature monitor TWW, adjustable temperature limiter TWB, and mechanical temperature limiter TB - Function SetpointWAIT ensures processing only begins once the target temperature is reached - AtmoCONTROL software on a USB stick allows for advanced programming, management, and data transfer via Ethernet or USB port - AutoSAFETY features integrated over- and undertemperature monitoring "ASF", automatically adjusting and providing alarms for any temperature deviations - Stainless steel interior with deep drawn ribbing and integrated heating on four sides, designed for easy cleaning and durability The Memmert UF75plus Forced Circulation Oven 74L, 115V is a versatile and high-performance oven designed to meet the rigorous demands of laboratory applications. Its working temperature range from 10°C above ambient to +300°C provides the flexibility needed for various thermal processes. Equipped with TwinDISPLAY, this oven offers precise control through its multifunctional digital PID-microprocessor controller and two high-definition TFT-color displays, ensuring reliable and easy monitoring of all critical parameters. The 74L (2.61 cu.ft.) chamber, with its stainless steel interior and deep-drawn ribbing, allows for uniform heating, while its easy-to-clean design adds to its convenience and longevity. The UF75plus prioritizes safety with comprehensive mechanisms such as the overtemperature monitor TWW, adjustable temperature limiter TWB, and mechanical temperature limiter TB. These features are further enhanced by AutoSAFETY technology, which includes over- and undertemperature monitoring, ensuring that any deviations trigger timely alarms. The oven's advanced functionality is supported by the AtmoCONTROL software, allowing users to program, manage, and transfer data through a USB or Ethernet interface. With additional features like Function SetpointWAIT, which ensures the process begins only when the target temperature is reached, and the ability to adjust fan speed and fresh air admixture in 10% increments, the UF75plus is a top-tier solution for precise, safe, and efficient thermal processing. INCLUDED: TheMemmert UF75plus Forced Circulation Oven 74L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert UF110 Forced Circulation Oven 108L, 115V Working Temperature Range Min. 10°C above ambient  (more)up to +300°C Oven Type Forced Air Circulation Chamber Volume 108 L (3.8 cu.ft.) Features - Setting temperature range from +20 to +300°C - Working temperature range of at least 10°C above ambient up to +300°C - Volume of 108 L (3.8 cu.ft.) with maximum loading capacity of 385 lbs - ControlCOCKPIT with adaptive multifunctional digital PID-microprocessor and high-definition TFT-color display - Forced air circulation by quiet air turbine, adjustable in 10% steps - AtmoCONTROL software for programming, managing, and transferring data via USB or Ethernet - Fully insulated stainless steel doors with 2-point locking and inner glass doors - Easy-to-clean interior made of stainless steel with integrated large-area heating on four sides The Memmert UF110 Forced Circulation Oven 108L, 115V offers precise and reliable temperature control for various industrial and laboratory applications. With a working temperature range of at least 10°C above ambient up to +300°C, this oven is designed to handle demanding thermal processes. It features a spacious 108 L (3.8 cu.ft.) chamber that can accommodate a maximum load of 385 lbs, making it ideal for high-capacity heating tasks. The ControlCOCKPIT’s adaptive multifunctional digital PID-microprocessor controller, equipped with a high-definition TFT-color display, provides effortless monitoring and management of critical parameters like temperature, fan speed, air flap position, and program settings. The integrated SetpointWAIT function ensures that the process time only begins once the desired temperature is reached, enhancing precision in every operation. Built for durability and efficiency, this model utilizes a quiet air turbine for forced air circulation, adjustable in 10% increments to suit specific needs. The oven’s interior is constructed from easy-to-clean stainless steel, reinforced with deep-drawn ribbing and large-area heating on all four sides, ensuring uniform temperature distribution. The fully insulated stainless steel door with a 2-point compression lock and inner glass door provides safe and secure operation. Additionally, the oven includes AtmoCONTROL software for programming, managing, and transferring data via USB or Ethernet, allowing users to effectively monitor and document every process. This robust design, combined with versatile control technology, makes the Memmert UF110 an ideal choice for laboratories and industrial facilities seeking consistent and precise temperature management. INCLUDED: TheMemmert UF110 Forced Circulation Oven 108L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

A programmable laboratory oven with multiparametric microprocessor with the possibility of memorizin (more)g 4 programs with 8 segments each. Fine temperature regulation, clear and complete display, top safety class, front regulation of the pipe on the back for exhaust fumes. MATERIALS:     External structure in steel painted with anti-acid epoxy powder     Inner chamber in 18/8 stainless steel     Ergonomic handle, easy to use and robust STANDARD:     PID thermoregulator with multi-display and adjustable temperature up to 300°C     4 storable programs with 8 segments each     Setting up ramps in °/min     2 shelves     pipe on the back for exhaust fumes with front opening/closing adjustment device     10 mm hole on the upper side     Safety class DIN 3.1, the highest     IP protection: 42 INSTRUMENT SAFETY SYSTEM The oven has an independent electronic safety system. The electronic circuit DOES NOT depend on the main thermoregulator and will work even if the main board is broken. If the temperature exceeds the set point by a certain number of ° (set by the user), the LED will light up and the oven will continue to operate at the safety temperature. Programmable OVEN STF-NR FALC

Head: Trinocular Eyepiece: Olympus WHK 10x/20 L Objectives: DPlan 10x/0.25, APlan 40x/0.65, SPlan Oi (more)l 100x/1.25, DPlanApo UV Oil 20x/0.80, DApo UV Oil 40x/1.30, DApo UV Oil 100x/1.30 Final Magnifications: 100x, 400x, 1000x Nosepiece: Six-way Focusing: Coaxial coarse and fine control knobs Illuminator: Fluorescence and Halogen

Lowara E-SV 10SV18F075T Vertical Multistage Pump Lab This item was removed from a university where i (more)t was surplus to requirement. It is in good cosmetic condition, and powers on, we are unable to test it further at our facility. This item is fitted with 3-Phase 32amp plug.

Dolomite Mitos P-Pump System With Remote Chamber 400 + Flow Rate Sensor This was removed from a univ (more)ersity lab where it was surplus plus to requirements. All units power up but have not been tested further. It is in reasonably good cosmetic condition with minor marks from use. Included are; Includes: -Dolomite Mitos P-Pump-Dolomite Mitos Remote Chamber 400-Dolomite Mitos Sensor Interface-Dolomite Mitos Flow Rate Sensor-P-Pump user manual-Remote chamber 400 manual-Sensor manual P-Pump model number- 3200016_4P-Pump serial number- 1600680 Chamber serial number- 490174u7 Sensor serial number- 4903648

The MW-04-3 mass converter is designed to be a component of construction of an industrial load cell  (more)scale. Depending on the needs, communication can be established via RS232, Profibus DP. The MW-04-3 mass converter can connect with weighing indicators or the PC. It is equipped with Inputs/Outputs enabling independent control of some industrial processes, e.g.: dosing. One MW-04-3 mass converter allows to operate up to 4 weighing platforms. Construction The converter is housed in a metal casing. Signal cables of the weighing platforms (4 pcs maximum) are fed through cable glands. RS232 is available on the M12 8P connector, Profibus DP may be fed through the PG11 cable gland. The device is equipped with an in-built power supply, this allows to power it directly from the mains. By standard the MW-04-3 mass converter supports 2 weighing platforms, optionally it can support 4. Area of use: Industrial load cell scales; Complex weighing systems supervised by computer system thanks to use of the Ethernet module; Connecting numerous weighing platforms to an industrial indicator; Dosing systems; Silo weighing; Discrete weighing (no weighing indicator) on a production line; Weighing in place with limited access, where instant readout of mass is not required, just record of weighings; Large embedded scales, where the converter is installed under the scale; Simple systems for chackweighing and result control Communication with the automation system due to an implemented MODBUS communication protocol. Indicator Software Functions: Designing formulas and dosing processes directly on the weighing indicator, Dosing and formulations (manual and automatic), Configuration of communication between formula making scales and actuators, Carrying out dosing and formulations on numerous platforms, Placing production orders for formulation (refers to PUE 5) with batches where the following is set: multiplier (quantity of formulation repetitions), source and target warehouse, user, scale. "Formulations" software makes use of the weighing indicators functionality to the maximum when it comes to their operation along with actuators, e.g. control of dosing valves. Additional advantage is the possibility to set an interrelated ingredient dosing on various platforms within one formulation process. Formulations and Dosing in the Industry: Industrial weighing indicators are designed on the basis of an innovative approach to formulation and dosing processes. Communication between the indicators and the modern MW-04 mass converters boosts the functionality of systems that realise both dosing and formulations. Communication interfaces enable placing the weighing platform and the indicator in a considerable distance one from another. Formulation process carried out using RADWAG indicators is highly popular in various areas of industry, the indicators enable either manual or automatic dispensing of many ingredients in accordance with a pre-defined formulation. Practically any product can be a formulation ingredient, either it is a loose material such as sugar, tea, grain, spices, powders etc. or liquid, this is possible thanks to appropriate automation. Compatibility with: PUE 5 Indicator; PUE 7.1 Indicator; PUE HY10 Indicator; PC.

Heidolph Hei-VAP Expert HL/G3 Non Coated Hand Lift w/ G3 Vertical GlasswareFeatures - Rotation speed (more) range of 10 to 280 RPM - Heating bath temperature range of 20°C to 210°C - Conveniently adjust the angle of inclination between 20° and 80° with a maximum height of 160mm - Multilingual menu and text display for error messages - Integrated solvent library to facilitate adjustment of the required vacuum on an external vacuum controller - Smart functions include timer and maximum temperature limitation - Optional display of vapor temperature - Highly resistant PTFE vacuum seals achieve maximum tightness and reduce expensive spare parts - Available in hand lift or motor lift models - USB and Micro SD interfaces featured 5" touch screen display with clear display of all values, featuring basic and advanced views, along with additional smart functions Separate knobs for rotation and heating with locking function to prevent accidental adjustments, along with LED ring lights Safety heating bath with overheat and dry run protection, featuring ergonomic handles for easy removal/disposal of contents The Hei-VAP Series of rotary evaporators was developed with an emphasis on the essentials: well thought-out details with a focus on features and functions to facilitate everyday laboratory work. Standard models are designed without vacuum control. These systems are for integration into an existing vacuum system or for configuration with optional vacuum controller. Precise setting of rotation speed and heating bath temperature on the digital touch display or – for quick access during an active process – directly via the knobs on the operating panel. All Hei-VAP rotary evaporators have a safety heating bath with overheating and dry running protection, ergonomic handles, double wall and an integrated spout. Separate knobs with intuitive LED ring light system not only allow visual process control, but also direct intervention in the evaporation process at any time. The residual heat indicator operates when the function is deactivated and in standby mode, flashing and the display of the residual heat warn of the risk of burns (50 °C). Click Here to View Product Video INCLUDED: The Heidolph Hei-VAP Expert HL/G3 Non Coated Hand Lift w/ G3 Vertical Glassware includes: - Heating Bath - Control Panel - G3 Vertical Glassware - 1 Liter Receiving Flask - 1 Liter Evaporating Flask - Vapor Tube - Vacuum Seal - Power Cord - Operator's Guide - Full 3 Year Manufacturer's Warranty