IKA Oven 125 Control Drying Oven

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

BARNSTEAD Thermolyne 1300 Muffle Furnace FB1310M-33 Model: FB1310M-33 Capacity: 1.3 litres Working t (more)emperature limit: 1100ºC Continuous operating temperature: 982ºC Table top muffle Heating volume: 100 X 95 X 110mm External dimensions: 200 X 335 X 220 mm 1050 watts / 220V Environmental operating conditions: 17 to 27ºC, humidity less than 80% non-condensing Average cosmetic condition, numerous traces of rust

Carbolite Oven NRI-200F This item was removed from a university lab where it was surplus to requirem (more)ents. The unit powers up and is in full working order. It was tested with a digital thermometer (not included). It is in reasonably good cosmetic condition.

Yamato DX-602C Natural Convection Oven 153L, 115V Temperature Range Ambient +5°C to 280°C Temperatu (more)re Distribution Accuracy ± 10°C at 280°C Chamber Volume 153L Features - Economical and cost saving - Easy to use and maintain - Excellent temperature accuracy - Digital PID controller for easy operation with options for Fixed setting, Auto Start, Quick Auto Stop and Auto Stop - Increased safety and self-diagnostic functions - Calibration off-set function The Yamato DX-602C Natural Convection Oven 153L, 115V is designed for both economy and efficiency. It features a digital PID controller for straightforward operation, including options like Fixed setting, Auto Start, Quick Auto Stop, and Auto Stop. The oven operates within a temperature range of room temperature +5°C to 280°C, maintaining a temperature control accuracy of ±1°C and distribution accuracy of ±10°C at 280°C. It takes approximately 80 minutes to reach its maximum temperature from room temperature. This oven is built with a durable stainless-steel interior and an electro-galvanized steel sheet exterior finished with melamine resin, ensuring longevity and ease of maintenance. It's insulated with glass wool and utilizes a 1.36 kW iron-chrome wire heater. Equipped with two 33 mm exhaust ports on the top, it offers microprocessor controlled PID temperature management with digital setting and LED display options, alongside a versatile timer range. Safety is a priority, with features including self-diagnostic functions, a key lock, hydraulic overheat prevention, and an electric leakage breaker with overcurrent protection. The internal dimensions are 600x510x500mm, and the external dimensions are 700x640x830mm. The oven can support a shelf plate load of 15kg and features 12 shelf rest steps with a 35mm pitch. The Yamato DX-602C is an ideal solution for those in need of a large, reliable, and user-friendly convection oven for various applications. INCLUDED: The Yamato DX-602C Natural Convection Oven 153L, 115V includes: - 2 x Stainless Steel Punching Metal Shelves w/ Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Yamato DP-104C Large Capacity Programmable Vacuum Oven 1000L, 480V, 3 Phase Operating Temperature Ra (more)nge 40 to 200°C Operating Pressure Range 101 - 0.1kPa (760 - 1 Torr) Internal Capacity 1000L Features - Vacuum pump can be installed inside the oven - Quick connect / disconnect of vacuum pipes for easy vacuum pump maintenance - Improved working efficiency as exhaust system is improved to significantly shorten the time to reach vacuum - Use specialized function menu key and up/down key to set. With program operation function, use submenu key to operate overheat protector, deviation correction, etc. - Self-diagnosis circuit (abnormal temperature sensing, heater disconnection, auto overheat prevention, SSR short circuit), overheat protector, ELB to prevent overcurrent, key lock, etc. - For safety, resin protection panel is installed at the observation window Large scale 1000L vacuum drying oven designed for treatment of large-sized parts. Quick connect / disconnect of vacuum pipes for easy vacuum pump maintenance. Because the exhaust system is improved to significantly shorten the time to reach vacuum, working efficiency is improved. Use specialized function menu key and ▲▼ key to set. With program operation function, use submenu key to operate overheat protector, deviation correction, etc. Vacuum pump can be installed inside the oven. Operating temp. range of 40~200° CINCLUDED: The Yamato DP-104C Large Capacity Programmable Vacuum Oven 1000L, 480V, 3 Phase includes: - Stainless Steel Punching Plates, 4 pcs. - Power Cord - 1 Year Manufacturer's Warranty

Yamato DKL-601C Forced Convection Oven 150L, 115V Temperature Range Room temp. +10~260°C Temperatur (more)e Distribution Accuracy ±2.5°C (at 260°C) Chamber Volume 150L Features - Fixed temperature, Quick auto stop, Auto stop, and Auto start operating modes with easy control capabilities - Settings can be made digitally with the dedicated operation menu keys or the ▲/▼ keys - Calibration off-set as auxiliary function - Self-diagnostic functions, MCB with over current protector, hydraulic standalone overheat prevention device Economical forced convection 150L constant temperature oven with basic functions and safety features. Fixed temperature, Quick Auto stop, Auto stop, and Auto start operating modes with easy control capabilities. Settings can be made digitally with the dedicated operation menu keys or the ▲/▼ keys. Operating temp ambient +10~260°C. INCLUDED: The Yamato DKL-601C Forced Convection Oven 150L, 115V includes: - 2 x Stainless Steel Shelf Plates w/ 4 x Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

This was removed from a university lab where it was surplus to requirements. The system is in reason (more)able cosmetic condition. There are stains and other marks along the edges and surface. The atmospheric temperature & humidity probe is dented. The item is untested as it wasn't supplied with a PSU. Also included are the following:1x Delta-T Devices atmospheric temperature & humidity probeS/N: RHAI-077 1x Delta-T PC software type LS2Version 1.04 1x Desiccant Pack1x DE-9 cable1x Tutorial Kit1x Spares & Accessory Pack3x Component part (EMC directive) 5m 5x Temperature Probes User Manual1x Quantum Sensor User Manual1x Delta-T Devices Data Loggers, Sensors & Systems1x Delta-T Devices Plant Science & Solar Radiation Studies1x Delta-T Devices Image Analysis Systems1x Delta-T Logger User Manual Version 2.01

MIL'S PS 12V vacuum pump. Single stage oil-free piston pump suitable for many types of applications  (more)in dry and wet environments. Compact design, with minimal maintenance and low acoustic level. Low energy consumption. They are recommended for applications where noise level is a priority. It has a pumping speed of 10 m3/hr and can reach a final vacuum of 80 mbar.

Do you need a balance that not only determines weight with impressive accuracy, but also performs a  (more)digital audit, responds to your voice commands and sends you light messages? If so, learn about the functionality of the ELLIPSIS series of balances: Digital Weighing Auditor Ensures that your balance is ready for use. It enables air buoyancy compensation in real-time. What is more, it informs about the need for a balance inspection or a periodic audit of the balance’s accuracy and sensitivity. 10-Inch Display Bigger screen – 10’’ – means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Uncompromising User Verification For the first time ever, the balance will verify the user using a password, RFID card, fingerprint reader, facial recognition mechanism, or any combination of these. Ambient Light – An Innovative Way for the Balance to Communicate With the User The light colour will tell you about status, process results, procedures, or alerts. Hotspot Use the balance on any device connected to it. This can be a smartphone, tablet, or computer. RFID ELLIPSIS works with RFID tags* that can be used to tag your products or formulation ingredients in the database. They can also be used to identify a user. Live Note – Note Down Your Conclusions It’s the first time you can add a voice memo to a measurement series or procedure report. If you prefer to write it down, ELLIPSIS allows you to add a text note. Handy Library This is where a series of recent measurements or a report ready for digital signature, according to 21 CFR Part 11, can be found. Widgets Prepared to display what you need most at any given moment. Automatic Leveling of the Balance ReflexLEVEL System Instead of manually leveling your scale - level it automatically. The ReflexLEVEL System saves you time and gives you maximum precision in your measurements. Smart Min Weight The balance displays whether the value of the weight you want to weigh is below or above the minimum weight threshold. Ionizer Do you have an electrostatic sample that cannot be weighed? The ionizer will neutralize its electrostatic charge. 21 CFR Part 11 Do you work in the pharmaceutical industry? Do you need a digital signature? We are offering the laboratory balance which as a standalone fully meets the requirements of 21 CFR Part 11/ EU GMP Annex 11. - Full data security - Electronic signatures - Validations - Electronic records - Audit trails Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. Two-point adjustment Adjacency, which takes place at two measurement points instead of one, improves measurement precision over the full weighing range. And what does this mean for you? More accurate measurement. * RFID ISO/IEC 14443 Type A, 13.56 MHz

Class M1 mass standards are versatile measuring tools characterized by their high precision and vers (more)atility in laboratory, industrial or commercial applications. Classified as M1 metrology class, they are valued for their versatility and accuracy in mass measurement. M1 mass standard: flat polygonal sheet Nominal value: 50 mg Material: nickel silver M1 Class Mass Standards – Key Features High-Level Precision - M1 class mass standards are designed to ensure precision in mass measurements. Permissible deviations from the actual mass are set with strict standards. Versatility of Applications - Characterized by versatility, M1-class standards are used in fields such as laboratories, industry, commerce and other areas requiring precise weight measurements. Measurement Stability - M1-class mass standards are stable over time, meaning that they maintain their measurement precision even despite prolonged use. This feature is especially important for tools that are used regularly. Operation in a Wariety of Ambient Conditions - M1 class mass standards are designed to cope with both laboratory, industrial and commercial conditions. Application 1. Analytical Laboratories In analytical laboratories where precise measurements are crucial, Class M1 mass standards are used to calibrate medium-precision balances. 2. Manufacturing Industry In the manufacturing industry, where product quality control is important, M1 class mass standards can be used to calibrate balances used in the manufacturing process. 3. Weighing Trade In the weighing trade, where measurement precision is required by law, M1 class mass standards can be used as a reference for calibrating commercial balances. 4. Testing Laboratories In research laboratories, Class M1 mass standards can be used to ensure precise weight measurements. Class M1 mass standards are versatile tools that are used in various areas of life. Their ability to adapt to different conditions makes this class of standards highly valued in the world of science, industry and commerce alike.

Scientific Industries Mini-100 Orbital-Genie A Standard Footprint variable speed Orbital shaker with (more) non-slip, rubber-coated platform with spill-proof edges. Ideal for gentle shaking applications. No additional accessories necessary. Scientific Industries Mini-100 Orbital-Genie Specifications Speed (RPM) 20 – 100 RPM Orbit 19mm Product Weight 3.5 Kg (7.8 lbs.) Overall (D x W x H) 350 x 350mm (14 x 14in) Platform Dimension 290 x 290mm (11.4 x 11.4in) Warranty 24 months Markings CE