Captair Erlab Ministore 822A - GB Cabinet Lab

Protex Ventilated Workstation Model/Type - VB FH This was removed from a university lab where it was (more) surplus to requirements. The unit is in reasonably good cosmetic condition with minor marks from use. It has not been tested as it needs a power cable wired up. Workstation surface - 140 x 70cm Cabinet dimensions L95 W55 H54Internal - D49.5 W94 H53

Perkin Elmer Janus Automated Workstation with Air Science Purair Advanced Ductless Fume Hood This sy (more)stem was removed from a university laboratory where it was surplus to requirements. It has been professionally serviced and deemed to be in full working order, a brief summary of the report is below: The workstation powers on, initializes successfully, and is in working order. Motion checks for the Varispan, barcode reader, gripper, Peri pump, and syringe pumps were completed without errors. The X and Y rails, as well as the gripper Z worm drive, have been cleaned and lubricated. Tip pick-up and liquid level sensing could not be verified as no tips or system liquid are included. The unit is currently secured with shipping clamps in place. There is no Software included with this system. The system is housed within an Air Science Purair Advanced Ductless Fume Hood, which powers on with both light and airflow functioning. Specifications: - Workstation Part No.: AJL8G01 - Workstation Serial No.: DG11118582 - Manufacture Date: November 2011 - Last Service: 06-12-2022 Fume Hood: - Model: Purair P30 - Serial No.: P90786 - Internal Dimensions: L173 W109 H116 cm - Last Service: 09/08/2022 Accessories: - Box of Plate Holders. - Various Cables. - 2 x Waste Bottles. - Waste Bin The system is in reasonable used cosmetic condition.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Suitable for different applications depending on filters used. Filters not included but are avaliabl (more)e here. Dimensions (WxHxD): 1000 x 1482 x 740 mm Internal dimensions (WxDxH): 920 x 915 x 676 mm Volume of air treated: 375 m3/h Air velocity with lower door closed: 0.51 m/s Sound level: 60 dB(A)

Epilog Legend 36EXT Laser With 2 x Laser Fume Extractors Lab This was removed from a university wher (more)e it was surplus to requirements. Epilog Laser - Legend 36EXTSerial Number: 9060-0813513624RManufacture Date: 2008 The machine is fully functional but requires a new laser tube. It is in good cosmetic ocdiiton with minor marks. Bofa Laser Fume Extractor - AD350Serial Number: AD350-02284 Identify Advantage Laser Fume Extraction - AD350Serial Number: 11/08/AD350-197 Both fume extraction units are in good cosmetic condition, but neither has been tested at our facility. Also included: 3 x Used Replacement Motors (Untested)1 x Laser Diode1 x Epilog Legend 36EXT Manual Due to the system requiring a new laser tube we are selling this as spares/repairs.

Water bath from 25°C to 99.9°C for the laboratory The shaking water baths of the LAUDA Hydro series  (more)stir laboratory samples with linear or orbital motion, depending on the model. They are reliable instruments, ideal for any laboratory application, be it biological, medical or biochemical, guaranteeing a homogeneous distribution of the temperature. The integrated speed controller enables a load-independent, continuously adjustable stirring movement with soft start. The H 20 SW and H 20 SOW shaking water baths are equipped with a cooling coil as standard. The temperature range can be extended to a minimum of +10°C by connecting them to the domestic water supply or commercially available circulating chillers. Qualitative characteristics - Digital regulation of the temperature and indication via LED display - Load-independent, continuously variable stirring with soft start - Electronic monitoring of the thermoregulator functions, with two fuses for under/over temperature protection - Tank, frame, cover with condensation channel, shaking basket and heater in stainless steel - No dripping condensation – arched insulating lid to reduce heat loss and prevent condensation from dripping onto samples Operation All water baths come standard with a perforated pan and no racks are required. Flasks and containers can be placed directly on the bottom. The drain valve is located on the rear side. Controllers The control panel consists of a large, high-contrast TFT display and a membrane keyboard with four softkeys, protected against dirt and water drops. The menu will guide you on how to use the bain-marie correctly. Esempi applicativi - Bacteriological tests - Molecular biology - Demulsivity studies - Processing of chemical reactions - Thawing - Metallurgical analyses - Incubation of microbiological assays - heating reagents - Environmental studies - Food Processing (QC) - Water quality research - Cytochemistry Accessories available Water level regulator. The heating element is located directly under the sieve plate for even temperature distribution in the tank. Electronic monitoring of the temperature regulator. Two independently operating temperature fuses. Improved visual and audible alarms for increased sample safety. Control elements tilted back for increased splash protection and improved operating comfort. - Perforated plate to place the glassware directly on the bottom. - Fill mark max. to prevent overflows. - Easy removal of sieve plate for cleaning. Highest quality materials: tank interior, lid, sieve and heating element made of stainless steel. Heat insulating lid in stainless steel, double walled with internal curvature to guide the condensate. Limescale deposits inside the water bath can be removed with normal commercial descalers. The internal tray can be easily disassembled and lifted for quick and thorough cleaning. Recommended accessories - Water level regulator. Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

Leitz Wetzlar Dialux 20 Microscope This was removed from a university lab where it was surplus to re (more)quirements. The unit is in good cosmetic condition, with all mechanical elements in working order. Includes the following. 1x Leitz Lamp Power SupplyObjectives: 1x Leitz Wetzlar P 10/0.25 170/- 1x Leitz Wetzlar NPL FLUOTAR 40/0.70 160/0.19 PHACO 2 1x Leitz Wetzlar PLAN 100/1.25 oil 160/0.17

Waters Acquity H-Class UPLC System This is sold on behalf of a client. It is surplus to requirements (more). The lab informed us that it is in full working order.All modules are in excellent cosmetic condition with only minor marks from use. Included are; Waters Aquity UPLC Quanternary Solvent ManagerWaters Aquity UPLC Sample Manger - FTNWaters Aquity UPLC Sample OrganizerWaters Aquity UPLC Column ManagerWaters Aquity UPLC Column Manger AuxWaters Aquity UPLC PDA DetectorPC with Relevant Software. This system is sold complete with all necessary cables included. Collection is available from Cardiff UK, but we may be able to arrange shipping for an additional cost. The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

Labtech LT-4000 Microplate Reader This was removed from a university lab where it was surplus to re (more)quirements. The unit powers up but we were unable to test it further at our facility. It is in good cosmetic condition with minor marks.

E1-class mass standards are the elite in the world of metrology, because standards of this class rep (more)resent the highest level of precision and accuracy in mass measurement. The E1 classification is one of the most stringent standards that standards must meet in order to be considered the most advanced and trustworthy measurement tools. E1 - class standard: flat polygonal sheet Nominal value: 50 mg Material: Stainless steel What Are the Characteristics of the E1 Class? Highest Precision - The allowable deviation from the actual weight is minimal, making standards of this class ideal for applications where every gram matters. Stability and Repeatability - This guarantees a consistent level of accuracy over the long term. Accurate Calibration - Standards of this class must be regularly compared with other standards of known mass to confirm their measurement accuracy. Materials with Unique Properties - E1 class mass standards are often made of materials with exceptional physical properties, which makes them stable and resistant to changes in environmental conditions. Application 1. Analytical Laboratories In analytical laboratories where accurate measurements are crucial, E1 class mass standards are used to calibrate balances with the highest precision. 2. Pharmaceutical Industry In drug manufacturing, where even the slightest deviation from the standard affects quality, E1 class mass standards are irreplaceable. 3. Scientific Research In scientific research, especially in areas requiring the highest precision, such as physics or chemistry, E1 class mass standards are used to ensure reliable results. 4. Metrology Industry In metrology laboratories where research on E1 class mass standards alone is carried out, E1 class standards are the standard of excellence. Class E1 mass standards are not only measuring tools, but also a symbol of metrological excellence. Their use affects the quality of measurements in various areas of life because they provide precision that can be relied upon. They are a key element in the world of mass measurement, shaping standards and raising the bar for all measurement tools.

M1 Mass Standard - knob weights - set (1 mg - 50 g), wooden box.