Labconco FreeZone 2.5 Freeze Dryer

This listing is for a Leosmak LEO-004 Compact Freeze Dryer sold through ULMfreezedryers.comWe are st (more)ock holders in UKPrice before VAT - £3,600The Leosmak LEO-004 Compact Freeze Dryer offers a cost-effective way to preserve food, helping you save up to 30% on grocery bills by reducing waste. Whether you're preparing meals for camping trips, emergencies, or simply extending the shelf life of seasonal produce, this freeze dryer meets all your culinary needs.What’s IncludedLEO-007 Freeze Dryer.6 trays. Drainage hose with connector.1 litre of oil.Spare temperature sensor. Leosmak bag.Operating manual.Catalogue.Features 6 shelves, 6 trays, 0,7 m2 shelf area.20 or 40mm trays available .Freeze dry 7KG fresh food per batch.GN 2/3 Stainless steel trays.Freezing and heating range: -45°C - +70°C.Short Freeze Drying Time: Our advanced technology ensures efficient and rapid freeze drying, preserving the quality of your food.100% Stainless Steel Construction: Durable, easy to clean, and designed to withstand rigorous use while maintaining hygiene.Washable Chamber: No electrical components in the chamber means easy maintenance and enhanced safety.Plug and Play Operation: Simple setup allows you to start freeze drying immediately, even in a home environment.Low Noise Operation: Designed for quiet performance, making it suitable for home use without disturbing your daily activities.Included Vacuum Pump: Comes with a high-quality vacuum pump to facilitate the freeze drying process.Fully Automatic Process: Set it and forget it! Enjoy hassle-free operation with minimal supervision.Wi-Fi Monitoring: Control and monitor your freeze dryer remotely via our Android or iOS application. Dimensions Freeze dryer exterior dimensions: 550mm W x 800mm D x 770mm H.Perfect for counter top, cart, or table. Weight 70KG. Power Required power supply: 220V, 2,5 kW.Energy consumption: ~7,5.kWh/1kg/standard batch. Shipping Info Shipping dimensions: 90x80x105 cm.Gross Shipping weight: 117 kg.Maintenance Replace vacuum pump oil every 20 to 30 batches (takes about two minutes) Clean freeze dryer as needed. Warranty Min. 24 months, extendable warranty.

Heto Drywinner DW 1,0-60E Freeze Dryer This item was removed from a university laboratory where it w (more)as surplus to requirements. It powers on and is in fair cosmetic condition. The vacuum elements have been tested with an in-house vacuum pump and are fully functional, with taps successfully shutting off airflow. The unit has been temperature tested (thermometer not included). Specifications:- Model: DW 1,0-60E - Serial No.: 97711001B

Labconco 700201000 FreeZone 2.5L -50 C Complete Freeze Dryer System Features - Patented moisture sen (more)sorprotects the vacuum pumpby preventing refrigerationor vacuum start-up whenmoisture is detected incollector chamber area. - Vacuum control valvemaintains set point vacuumlevel to speed the freezedrying process. - Lyo-Works OS provides a real time display of collector temperature and vacuum level - Flexible programming and control of optional drying accessories - Optional End-Zone™ end point detection for flask freeze drying - One-touch data logging and display provides information to maximize sample quality and minimize run time - FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run Bundle includes a multiport drying chamber comprised of 304 stainless steel. Drying Chambers provide a means to attach a flask to your freeze dryer or contain samples in bulk. Lyo-Works™ OS provides a real time display of collector temperature, vacuum level and optional End-Zone™ end point detection system, shown on a 5" full color, capacitive touch screen. The included Edwards RV rotary vane pump delivers excellent ultimate vacuum pressure, high pumping speeds and superior vapour handling capabilities with quiet operation. The Labconco FreeZone 2.5L -50 C Complete Freeze Dryer System includes the Labconco 700201000 2.5L -50C Benchtop Freeze Dryer with stainless steel coil and collector, Labconco 7522800 12-Port Drying chamber, and an Edwards RV3 Vacuum Pump. Features of the Labconco 2.5L -50C Benchtop Freeze Dryer with stainless steel coil and collector: Upright stainless steel collector coil holds 2.5Lof ice before defrosting -50C (for aqueous samples) Features include hot gas defrost, side-mounted USB port and rear-mounted Ethernet connection Environmentally-friendly HCFC/CFC-free refrigeration system Internal coil maximizes vapor-trapping efficiency FreeZone exclusive features protect your vacuumpump from costly damage: A vacuum break valve bleeds air into the system whenpower to the freeze dryer or vacuum pump is shut off for more than 5 minutes. Amoisture sensor prevents refrigeration or vacuum start-up when moisture isdetected in the drain line. Vacuum pump is automatically shut down when a leakis present in initial pull down or during run. The Labconco 7522800 12-Port Drying chamber includes 12 neoprene valves with plastic knobs that accommodate both 1/2" and 3/4" adapters for connection of flasks, a 1/2" thick arcylic lid with neoprene gasket, and one latching pin. Made of type 304 stainless steel. It is compatible with FreeZone 1, 2.5, 4.5, 6, 8, 12 or 18 Liter Freeze Dryers. The Edwards RV3 rotary vane pump delivers excellent ultimate vacuum pressure, high pumping speeds and superior vapour handling capabilities with quiet operation. INCLUDED: The Labconco FreeZone 2.5L -50 C Complete Freeze Dryer System includes: - Labconco 700201000 FreeZone 2.5L -50°C Benchtop Freeze Dryer with Stainless Steel Coil and Collector - Labconco 7522800 12-Port Drying chamber - Edwards RV3 Vacuum Pump - All Vacuum Tubing - Edwards EMF10 Mist Filter - Pump Oil - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco 700402000 FreeZone 4.5L -50C Complete Freeze Dryer System, PTFE CoatedFeatures - Patented m (more)oisture sensorprotects the vacuum pumpby preventing refrigerationor vacuum start-up whenmoisture is detected incollector chamber area. - Vacuum control valvemaintains set point vacuumlevel to speed the freezedrying process. - Lyo-Works OS provides a real time display of collector temperature and vacuum level - Flexible programming and control of optional drying accessories - Optional End-Zone™ end point detection for flask freeze drying - One-touch data logging and display provides information to maximize sample quality and minimize run time - FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run Bundle includes a multiport drying chamber comprised of PTFE coated 304 stainless steel. Drying Chambers provide a means to attach a flask to your freeze dryer or contain samples in bulk. Lyo-Works™ OS provides a real time display of collector temperature, vacuum level and optional End-Zone™ end point detection system, shown on a 5" full color, capacitive touch screen. The included Edwards RV5 Rotary Vane Pump delivers excellent ultimate vacuum pressure, high pumping speeds and superior vapour handling capabilities with quiet operation. The Labconco 700402000 FreeZone 4.5L -50C Complete Freeze Dryer System, PTFE Coated includes the Labconco 700402000 FreeZone 4.5L -50C Benchtop Freeze Dryer with PTFE coil and collector, Labconco 7522801 12-Port Drying Chamber PTFE-Coated, and an Edwards RV5 Rotary Vane Vacuum Pump. The Labconco 700402000 FreeZone 4.5L -50C Benchtop Freeze Dryer with PTFE Coil and Collector is designed for lyophilizing light to moderate sample loads. The compact design is ideal for labs with limited floor space. The upright PTFE collector coil holds 4.5 liters of ice before defrosting. A single 1/3 hp HCFC/CFC-free refrigeration system cools the collector to -50C (-58F), suitable for aqueous samples. The Labconco 7522801 12-Port Drying chamber includes 12 neoprene valves with plastic knobs that accommodate both 1/2" and 3/4" adapters for connection of flasks, a 1/2" thick arcylic lid with neoprene gasket, and one latching pin. Made of type 304 stainless steel with corrosion-resistant PTFE-coated interior. It is compatible with FreeZone 1, 2.5, 4.5, 6, 8, 12 or 18 Liter Freeze Dryers. Drying Chambers provide a means to attach flasks to your freeze dryer or contain samples in bulk. The Edwards RV5 Rotary Vane Vacuum Pump delivers excellent ultimate vacuum pressure, high pumping speeds and superior vapour handling capabilities with quiet operation. INCLUDED: The Labconco 700402000 FreeZone 4.5L -50C Complete Freeze Dryer System, PTFE Coated includes: - Labconco 700402000 FreeZone 4.5L -50C Benchtop Freeze Dryer with PTFE Coil and Collector - Labconco 7522801 12-Port Drying Chamber, PTFE-Coated - Edwards RV5 Vacuum Pump - All Vacuum Tubing - Mist Filter - Pump Oil - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco FreeZone 8L -50C Benchtop Freeze Dryer with PTFE coil and collector Features - Patented moi (more)sture sensorprotects the vacuum pumpby preventing refrigerationor vacuum start-up whenmoisture is detected incollector chamber area. - Vacuum control valvemaintains set point vacuumlevel to speed the freezedrying process. - Lyo-Works OS provides a real time display of collector temperature and vacuum level - Flexible programming and control of optional drying accessories - Optional End-Zone™ end point detection for flask freeze drying - One-touch data logging and display provides information to maximize sample quality and minimize run time - FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run Lyo-Works™ OS provides a real time display of collector temperature, vacuum level and optional End-Zone™ end point detection system, shown on a 5" full color, capacitive touch screen. A variety of FreeZone Freeze Dryer accessories are available including Shell Freezers, Tray Dryers, Drying Chambers and Product Shelves. Memory to store30 programs with 16 segments each including number of steps,ramp rate, shelf temperature, hold time and vacuum level FreeZone 8 Liter Benchtop Freeze Dryers are designed forlyophilizing moderate sample loads. The compact design is ideal for labs withlimited floor space. The upright stainless steel collector coil holds 8 litersof ice before defrosting. A single 3/4 hp HCFC/CFC-free refrigeration systemcools the collector to -50C (-58F), suitable for aqueous samples.Lyo-Works™ OS provides a real time display of collector temperature, vacuumlevel and optional End-Zone™ end point detection system, shown on a 5"full color, capacitive touch screen. Models with PTFE-coated collectors thatcan withstand corrosive compounds are available. Features Upright stainless steel collector coil holds 8Lof ice before defrosting -50C (for aqueous samples) Features include hot gas defrost, side-mounted USB port and rear-mounted Ethernet connection Lyo-Works OS provides a real time display of collector temperature and vacuum level One-touch data logging and display provides information to maximize sample quality and minimize run time FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run INCLUDED: The Labconco 700802000 FreeZone 8L -50C Benchtop Freeze Dryer with PTFE coil and collector 115V, 60Hz includes: - Vacuum Hose - Drain Hose - Hose Clamp x 2 - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco Dry Ice Benchtop Freeze Dryer -75°C, -103°FFor thelaboratory with occasional lyophilization (more) requirements, the Dry Ice BenchtopFreeze Dryer Manifold provides a simple, economical means of freeze-drying. Since dryice cools alcohol or other heat transfer solutions to approximately -75 degreesC or -103 degrees F, the Dry Ice Benchtop Freeze Dry Manifold is ideal for processingmaterials with low eutectic points. The Dry Ice Benchtop Freeze Dry System isequipped with a center well for dry ice and solvent that serves as a watervapor collector and doubles as a convenient pre-freezing bath. Flasks, serumbottles and ampules may be frozen by dipping and rotating them in the well.Type 304 stainless steel with twelve valves and a single run capacity of 1liter. Valves accommodate either 1/2" or 3/4" flask adapters.Includes dry ice/solvent center well with 1.92 liter capacity and cover,1/2" outside diameter port for connection to vacuum pump and 3/8"outside diameter port or connection to vacuum gauge. INCLUDED: The Labconco Dry Ice Benchtop Freeze Dryer System: - Dry Ice/Solvent Center Well & Cover (1.92 liter capacity) - 1/2" Outside Diameter Port for Connection to Vaccum Pump - 3/8" Outside Diameter Port for Connection to Vacuum Gauge - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Corbett Research Rotor-Gene RG-3000 with PC & Software This was removed from a university lab w (more)here it was surplus to requirements. The unit powers up and has been tested with the software. It was programmed to run and worked well in testing. It is supplied with a Windows 7 PC with RotoGene 6.1 installed. Rotor holds 36 x 0.2ml Comes with:-PC Cable2 x Spare rotor parts2 x Operators ManualsRotor Gene Back Up Floppy DiskRotor Gene Data Floppy DiskThe Rotor Gene Set up Files v4.2Rotor-Gene Software Version 4.6Rotor-gene 3000 Operating Software V4.6.94RotorGene 36/72 Maintenance Pack 1.0/1.1There are 4 more copied discs of the same

Polyscience F25N0A101B FT Series Flow Through Cooler, Continuous Cooling at -25°C, 120V, 60Hz PolySc (more)ience Low Temperature Coolers enhance and simplify low-temperature laboratory work, providing rapid, low-cost cooling of liquids to temperatures as low as -100C. Typical applications include the cooling of exothermic reactions, vapor and solvent trapping, and impact testing. They’re also ideal for extending the temperature range of non-refrigerated circulators to below ambient and boosting the cooling capacity of refrigerated circulators. Enhance and simplify your low-temperature laboratory work with a PolyScience Low Temperature Cooler. Available in both immersion probe and flow-through styles, they provide rapid, low-cost cooling of liquids to temperatures as low as -100C. Typical applications include the cooling of exothermic reactions, freeze point determinations, freeze drying, impact testing, lyphilization, and vapor and solvent trapping. Features Continuous cooling to -25°C Designed to run at maximum cooling Ideal for use with heated and refrigerated circulating baths INCLUDED: The Polyscience F25N0A101B FT Series Flow Through Cooler, Continuous Cooling at -25°C, 120V, 60Hz includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Polyscience MX28C135-A11B 28L Coliform Bath, MX (Ambient +10° to 135°C), 120V, 60Hz3D Visualization  (more)of the Polyscience Coliform BathThe rendered image can be freely rotated in a full 360-degree view, allowing you to zoom in, pause, and explore every angle. For enhanced detail, the rendering can also be displayed in full-screen mode. This 3D model is designed exclusively for visualization purposes and may not accurately represent the actual appearance of your product. Your browser does not support iframes. The PolyScience Circulating Bath with MX Temperature Controller is intended for the precise temperature control of suitable liquids in a reservoir. Extremely easy to use and maintain, it combines design innovation with highly intuitive operation to deliver convenient and versatile liquid temperature control for a wide range of applications. Features include an MX Temperature Controller, a 28-liter reservoir with a hinged, see-through gable cover, a large, easy-to-read display, DuraTop™, a large bath opening, a large, universal icon and English display, on-screen prompts, and single-point calibration capability.Click Here to View Product Video INCLUDED: The Polyscience MX28C135-A11B 28L Coliform Bath, MX (Ambient +10° to 135°C), 120V, 60Hz includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Multifunctional scales TMX H is designed to fast and precise determination of mass in industrial con (more)ditions. TMX H Multifunctional scales TMX H comprises terminal PUE 5 and a weighing platform. Labelling system series TMX H is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW