Labconco 720402000 FreeZone 4.5L -105 C Benchtop Freeze Dryer with PTFE coil and collector 115V, 60Hz

Heto Maxi Dry Plus System With Vacuum Centrifuge + Drywinner Freeze Dryer This was removed from a un (more)iversity lab where it was surplus to requirements. The system powers up and is in good working order. It is in reasonably good cosmetic condition with marks from use. Max RPM-1800 Includes 2x rotors/tube holders. One holds 4-5ml tubes and the other 12-15ml tubes. Centrifuge model number- VR maxi-1Centrifuge serial number- 804040235 Freeze dryer model number- CT/DW 110Freeze dryer serial number- 804050097 Maxi dry model number- MAXI-DRY PLUSMaxi dry serial number- 804060037

Heto Drywinner DW 1,0-60E Freeze Dryer This item was removed from a university laboratory where it w (more)as surplus to requirements. It powers on and is in fair cosmetic condition. The vacuum elements have been tested with an in-house vacuum pump and are fully functional, with taps successfully shutting off airflow. The unit has been temperature tested (thermometer not included). Specifications:- Model: DW 1,0-60E - Serial No.: 97711001B

Labconco FreeZone 2.5L -84C Benchtop Freeze Dryer with PTFE coil and collector Features - Patented m (more)oisture sensorprotects the vacuum pumpby preventing refrigerationor vacuum start-up whenmoisture is detected incollector chamber area. - Vacuum control valvemaintains set point vacuumlevel to speed the freezedrying process. - Lyo-Works OS provides a real time display of collector temperature and vacuum level - Flexible programming and control of optional drying accessories - Optional End-Zone™ end point detection for flask freeze drying - One-touch data logging and display provides information to maximize sample quality and minimize run time - FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run Lyo-Works™ OS provides a real time display of collector temperature, vacuum level and optional End-Zone™ end point detection system, shown on a 5" full color, capacitive touch screen. A variety of FreeZone Freeze Dryer accessories are available including Shell Freezers, Tray Dryers, Drying Chambers and Product Shelves. Memory to store30 programs with 16 segments each including number of steps,ramp rate, shelf temperature, hold time and vacuum level The Labconco FreeZone 2.5L -84C Benchtop Freeze Dryer with PTFE coil and collector 115V, 60Hz was designed for lyophilizing light to moderate sample loads. The compact design is ideal for labs with limited floor space. New Lyo-Works™ OS provides flexibility and convenience in an easy-to-use, touch screen display. Features Upright stainless steel collector coil holds 2.5Lof ice before defrosting -84C (for low eutectic point samples including acetonitrile) collector Features include hot gas defrost, side-mounted USB port and rear-mounted Ethernet connection Environmentally-friendly HCFC/CFC-free refrigeration system Internal coil maximizes vapor-trapping efficiency FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run. INCLUDED: The Labconco 710202000 FreeZone 2.5L -84 C Benchtop Freeze Dryer with PTFE coil and collector 115V, 60Hz includes: - Vacuum Hose - Drain Hose - Hose Clamp x 2 - Baffle - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco FreeZone 4.5L -84C Benchtop Freeze Dryer with PTFE coil and collector Features - Patented m (more)oisture sensorprotects the vacuum pumpby preventing refrigerationor vacuum start-up whenmoisture is detected incollector chamber area. - Vacuum control valvemaintains set point vacuumlevel to speed the freezedrying process. - Lyo-Works OS provides a real time display of collector temperature and vacuum level - Flexible programming and control of optional drying accessories - Optional End-Zone™ end point detection for flask freeze drying - One-touch data logging and display provides information to maximize sample quality and minimize run time - FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run Lyo-Works™ OS provides a real time display of collector temperature, vacuum level and optional End-Zone™ end point detection system, shown on a 5" full color, capacitive touch screen. A variety of FreeZone Freeze Dryer accessories are available including Shell Freezers, Tray Dryers, Drying Chambers and Product Shelves. Memory to store30 programs with 16 segments each including number of steps,ramp rate, shelf temperature, hold time and vacuum level FreeZone 4.5 Liter Benchtop Freeze Dryers are designed forlyophilizing light to moderate sample loads. The compact design is ideal forlabs with limited floor space. The upright stainless steel collector coil holds4.5 liters of ice before defrosting. Two 1/3 hp HCFC/CFC-free refrigerationsystems cool the collector to -84C (-119F), suitable for low eutectic pointsamples including acetonitrile. Lyo-Works™ OS provides a real time display ofcollector temperature, vacuum level and optional End-Zone™ end point detectionsystem, shown on a 5" full color, capacitive touch screen. Models with PTFE-coatedcollectors that can withstand corrosive compounds are available. Features Upright stainless steel collector coil holds 4Lof ice before defrosting -84C (for low eutectic point samples including acetonitrile) collector Internal coil maximizes vapor-trapping efficiency Optional PTFE-coated collectors withstand corrosive compounds Lyo-Works OS provides a real time display of collector temperature and vacuum level FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run INCLUDED: The Labconco 710402000 FreeZone 4.5L -84C Benchtop Freeze Dryer with PTFE coil and collector 115V, 60Hz includes: - Vacuum Hose - Drain Hose - Hose Clamp x 2 - Baffle - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco 794001010 FreeZone 2.5L -85C Triad Benchtop Freeze Dryer 230V, 60Hz Collector Temperature  (more) -85°C Water Removal Over 24 Hours 1.84L Ice Holding Capacity 2.5L Features - Stainless steel collector coil capable of removing 1.84 L of water in 24 hours and holding 2.5 L of ice before defrosting - Two 1/3 HP HCFC/CFC-free refrigeration compressors cool the collector to -85°C (-121°F) and work in concert with a 1000-watt heater to cool and heat fluid medium circulating through channels in the shelf. Not for use with samples containing methanol or ethanol - Processing shelf, 12.4" w x 14.5" d (31.5 x 36.8 cm). Spacing between shelf and top of chamber accommodates containers with stoppers up to 148 mm maximum height - One probe for monitoring temperature of sample in chamber - Temperature ramp and hold programming from -55°C to +50°C (-67°F to +122°F) and -75°C (-103°F) during pre-freezing. Controls temperature to ±1°C of set point. Memory to store 30 programs with 16 segments each including number of steps, ramp rate, shelf temperature, hold time and vacuum level - Full color, 5" capacitive touchscreen featuring Lyo-Works™ OS with real time display of collector temperature and vacuum level - Manual start-up buttons for collector and shelf temperature control and vacuum pull down - Alerts, diagnostic tests, user manual and defrost control - Stoppering control knob, vacuum release control knob and 1/8" OD user-supplied sterile/inert gas backfill port - Four left side-mounted neoprene valves with molded plastic knobs and fittings that accommodate 1/2" and 3/4" flask adapters - USB port, ethernet connection, and electrical receptacle for vacuum pump - Hot gas defrost with stainless steel drain pan, silicone drain hose and auto shut off at +60°C (+140°F) - Clear acrylic door, 1" thick, with silicon gasket and latch 3/4" OD vacuum connection. 36" long, 3/4" ID vacuum hose with two clamps The Labconco 794001010 FreeZone 2.5L -85C Triad Benchtop Freeze Dryer is designed for multiple types of lyophilization: flask, bulk and stoppering vials. With the ability to freeze dry samples in so many different forms, the Triad's versatility and compact design make it perfect for busy labs. The upright stainless steel collector coil holds 2.5 liters of ice before defrosting. Two 1/3 hp HCFC/CFC-free refrigeration compressors cool the collector to -85°C (-121°F), suitable for aqueous or dilute acetonitrile samples. Temperature-controlled shelves range from -55°C to +50°C (-67°F to +122°F) and a maximum of -75°C (-103°F) during pre-freezing. The shelves provide pneumatic stoppering with a diaphragm, eliminating the need for compressed gas. Lyo-Works™ OS provides a real time display of collector temperature and vacuum level, shown on a 5" full color, capacitive touchscreen. A stoppering tray dryer and four valve ports are built in. INCLUDED: The Labconco 794001010 FreeZone 2.5L -85C Triad Benchtop Freeze Dryer 230V, 60Hz includes: - Vacuum Hose - 2 x Hose Clamps - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco 794001010 FreeZone 2.5L -85C Triad Complete Freeze Dryer System Collector Temperature -85 (more)°C Water Removal Over 24 Hours 1.84L Ice Holding Capacity 2.5L Features - Stainless steel collector coil capable of removing 1.84 L of water in 24 hours and holding 2.5 L of ice before defrosting - Two 1/3 HP HCFC/CFC-free refrigeration compressors cool the collector to -85°C (-121°F) and work in concert with a 1000-watt heater to cool and heat fluid medium circulating through channels in the shelf. Not for use with samples containing methanol or ethanol - Processing shelf, 12.4" w x 14.5" d (31.5 x 36.8 cm). Spacing between shelf and top of chamber accommodates containers with stoppers up to 148 mm maximum height - One probe for monitoring temperature of sample in chamber - Temperature ramp and hold programming from -55°C to +50°C (-67°F to +122°F) and -75°C (-103°F) during pre-freezing. Controls temperature to ±1°C of set point. Memory to store 30 programs with 16 segments each including number of steps, ramp rate, shelf temperature, hold time and vacuum level - Full color, 5" capacitive touchscreen featuring Lyo-Works™ OS with real time display of collector temperature and vacuum level - Manual start-up buttons for collector and shelf temperature control and vacuum pull down - Alerts, diagnostic tests, user manual and defrost control - Stoppering control knob, vacuum release control knob and 1/8" OD user-supplied sterile/inert gas backfill port - Four left side-mounted neoprene valves with molded plastic knobs and fittings that accommodate 1/2" and 3/4" flask adapters - USB port, ethernet connection, and electrical receptacle for vacuum pump - Hot gas defrost with stainless steel drain pan, silicone drain hose and auto shut off at +60°C (+140°F) - Clear acrylic door, 1" thick, with silicon gasket and latch 3/4" OD vacuum connection. 36" long, 3/4" ID vacuum hose with two clamps The Labconco 794001010 FreeZone 2.5L -85C Triad Complete Freeze Dryer System is designed for multiple types of lyophilization: flask, bulk and stoppering vials. With the ability to freeze dry samples in so many different forms, the Triad's versatility and compact design make it perfect for busy labs. The upright stainless steel collector coil holds 2.5 liters of ice before defrosting. Two 1/3 hp HCFC/CFC-free refrigeration compressors cool the collector to -85°C (-121°F), suitable for aqueous or dilute acetonitrile samples. Temperature-controlled shelves range from -55°C to +50°C (-67°F to +122°F) and a maximum of -75°C (-103°F) during pre-freezing. The shelves provide pneumatic stoppering with a diaphragm, eliminating the need for compressed gas. Lyo-Works™ OS provides a real time display of collector temperature and vacuum level, shown on a 5" full color, capacitive touchscreen. A stoppering tray dryer and four valve ports are built in. The included Edwards RV8 Rotary Vane Vacuum Pump delivers excellent ultimate vacuum pressure, high pumping speeds and superior vapour handling capabilities with quiet operation. INCLUDED: The Labconco 794001010 FreeZone 2.5L -85C Triad Complete Freeze Dryer System includes: - Labconco 794001010 FreeZone 2.5L -85C Triad Benchtop Freeze Dryer 230V, 60Hz - Edwards RV8 Vacuum Pump - All Vacuum Tubing - Edwards EMF10 Mist Filter - Pump Oil - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Ohaus Guardian 7000 e-G71HS07C Hotplate Stirrer, 120V The Ohaus Guardian 7000 Hotplate Stirrers are  (more)designed with outstanding safety features and superior heating and mixing performance. The SmartHousing is chemical resistant with an innovative, easy-to-clean design that channels spills away from internal components and the angled glass control panel. The bright LCD display includes intuitive icons, temperature, speed and time settings - all designed to monitor performance from across the lab. Protect your lab with SmartPresence and SmartLink technologies. These exclusive features automatically shut off the heater if no one is detected after a user set “time out” period has passed. An industry-leading early detection system that uses two independent safety controls to continuously monitor the electronics and shut off heating before an overtemperature condition occurs. Precise stirring from 60 to 1600 RPM is made possible by the design of a powerful motor, strong magnet and software-controlled ramp rate, ensuring secure magnetic coupling for viscous applications. SmartHeat allows you to set the maximum temperature of the unit and SmartRate enables fast or slow temperature and speed ramp rates. The programming feature allows storage of 5 multi-step programs. INCLUDED: The Ohaus Guardian 7000 e-G71HS07C Hotplate Stirrer, 120V includes: - Two Stir Bars (40 x 8mm and 28.6 x 8mm) - 8" Stainless Steel RTD Temperature Probe - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Yamato SK-102C Compact Sterilizer 18L, 115V Temperature Setting Range 50°C to 126°C Timer 0 min. to (more) 999 min. Internal Capacity 18L Features - Easy to use - Option for an 18, 24 and 30 liter chamber - Powerful 2000W pipe heater - Easy to read 4 digit LED display - Programmable sterilizing and temperature functions - Timer Setting Range 0 to 999 min - Water level detection sensor - Safety valve - Safety interlocking interactive device The Yamato SK-102C Compact Sterilizer 18L, 115V is an advanced and user-friendly device designed for efficient sterilization. This 18L sterilizer, adaptable for 24 and 30 liter chambers, operates on a 115V system. It features a powerful 2000W pipe heater and a high-quality stainless steel SUS 304 interior, ensuring durability and reliable performance. The sterilizer offers a broad temperature setting range from 50 to 126°C and can handle a maximum operational pressure of 0.142MPa at its highest temperature. The temperature is easily controlled through a PID control by microprocessor and set using digital ▲▼ keys, with a clear 4-digit green LED display for monitoring. The sterilizer also includes a programmable timer ranging from 0 to 999 minutes. For safety, it is equipped with multiple features, including a water level detection sensor utilizing a liquid expansion method, a safety valve set at 0.165MPa, and a spring full lift safety valve, complemented by an interactive safety interlocking device. The internal dimensions of the sterilizer are ⌀280 x H292 mm, while externally it measures W380×D380×H629 mm, making it a compact yet efficient solution for various sterilization needs. INCLUDED: The Yamato SK-102C Compact Sterilizer 18L, 115V includes: - Rack - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

BrandTech Scientific Transferpette S-12 Multichannel M12-100, 10 to 100ul Pipette Volume Range 10 to (more) 100 ul Accuracy 0.8% / 0.80 ul at 100 ul Pipette Type Air Displacement Features - Ergonomic design ensures a comfortable grip for all hand sizes and both right- and left-handed users - True one-handed operation allows for easy volume setting, pipetting, and tip ejection without changing grip - Low operating forces and short stroke enable relaxed pipetting during extended use - Volume-change protection prevents accidental adjustments and is easy to operate even with gloves - Easy Calibration technology allows quick, tool-free calibration for consistent accuracy - 360° rotating pipetting unit for personalized comfort and flexible operation - O-ring system ensures easy mounting and ejection of tips, reducing strain during use - Individually removable nose cones and seals for easy cleaning and maintenance The BrandTech Scientific Transferpette S-12 Multichannel M12-100, 10 to 100ul Pipette is expertly designed for precision, efficiency, and user comfort in high-throughput liquid handling tasks. With twelve channels and an adjustable volume range of 10 to 100 ul, this pipette is ideal for microplate-based applications, PCR setup, ELISA assays, and routine liquid handling tasks. Its versatile partial volumes of 100 ul, 50 ul, and 10 ul provide flexibility for a wide range of lab procedures. Ergonomically designed to minimize fatigue, the Transferpette S-12 features a lightweight body and low operating forces, making it ideal for extended pipetting sessions. True one-handed operation allows seamless volume adjustment, pipetting, and tip ejection without changing grip, streamlining workflows and improving lab efficiency. The integrated volume-change protection prevents accidental adjustments, ensuring consistent and precise results. Equipped with Easy Calibration technology, this pipette allows for quick, tool-free recalibration to maintain optimal accuracy. Designed for long-lasting durability with high chemical and UV resistance, the Transferpette S-12 Multichannel M12-100 is the ultimate solution for reliable and precise liquid handling in demanding laboratory environments.Click Here to View Product Video INCLUDED: The BrandTech Scientific Transferpette S-12 Multichannel M12-100, 10 to 100ul Pipette includes: - 2 x TipBox - Shelf Mount - Reagent Reservoir - Mounting Wrench - Silicone Grease - 1 Set of Sealing Rings - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Millipore Milliflex PLUS Pump MXP PUMP 03 Model : MXP PLUS 03 With 3 Microwire Adapter 3 Filtration (more)s Pumps (Milliflex Plus) 3 x 24W