Labconco 711211010 FreeZone 12L -84C Complete Freeze Dryer System

This Edwards Freeze Dryer Modulyo was removed from a university lab where it was surplus to requirem (more)ents. The item powers on and is in reasonably poor cosmetic condition, unable to test it further at our facility. It cools down but has not been tested under a vacuum.

Labconco FreeZone 6L -50C Console Freeze Dryer with stainless steel coil and collector, Purge Valve  (more)Features - Patented moisture sensorprotects the vacuum pumpby preventing refrigerationor vacuum start-up whenmoisture is detected incollector chamber area. - Vacuum control valvemaintains set point vacuumlevel to speed the freezedrying process. - Lyo-Works OS provides a real time display of collector temperature and vacuum level - Flexible programming and control of optional drying accessories - Optional End-Zone™ end point detection for flask freeze drying - One-touch data logging and display provides information to maximize sample quality and minimize run time - FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run Lyo-Works™ OS provides a real time display of collector temperature, vacuum level and optional End-Zone™ end point detection system, shown on a 5" full color, capacitive touch screen. A variety of FreeZone Freeze Dryer accessories are available including Shell Freezers, Tray Dryers, Drying Chambers and Product Shelves. Memory to store30 programs with 16 segments each including number of steps,ramp rate, shelf temperature, hold time and vacuum level FreeZone 6 Liter Console Freeze Dryers are designed forlyophilizing moderate to large sample loads or numerous small containerbatches. The console features a front viewing window, interior space for avacuum pump, and accommodation for a large tray dryer such as the FreeZoneStoppering Tray Dryers (pump and tray dryer sold separately). These modelsoffer the broadest range of built-in options including a shell freezer. Theupright stainless steel collector coil holds 6 liters of ice before defrosting.A single 3/4 hp HCFC/CFC-free refrigeration system cools the collector to -50°C (-58F), suitable for aqueous samples. Lyo-Works™ OS provides a real timedisplay of collector temperature, vacuum level and optional End-Zone™ end pointdetection system, shown on a 5" full color, capacitive touch screen.Models with PTFE-coated collectors that can withstand corrosive compounds areavailable.Features Upright stainless steel collector coil holds 6 liters of ice before defrosting Lyo-Works OS provides a real time display of collector temperature and vacuum level Flexible programming and control of optional drying accessories Optional End-Zone™ end point detection for flask freeze drying One-touch data logging and display provides information to maximize sample quality and minimize run time Front viewing window makes monitoring vacuum pump oil hassle free FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run INCLUDED: The Labconco 700611100 FreeZone 6L -50C Console Freeze Dryer with stainless steel coil and collector, Purge Valve 115V, 60Hz includes: - Vacuum Hose - Drain Hose - Hose Clamp x 2 - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco FreeZone 8L -50C Benchtop Freeze Dryer with stainless steel coil and collector Features - P (more)atented moisture sensorprotects the vacuum pumpby preventing refrigerationor vacuum start-up whenmoisture is detected incollector chamber area. - Vacuum control valvemaintains set point vacuumlevel to speed the freezedrying process. - Lyo-Works OS provides a real time display of collector temperature and vacuum level - Flexible programming and control of optional drying accessories - Optional End-Zone™ end point detection for flask freeze drying - One-touch data logging and display provides information to maximize sample quality and minimize run time - FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run Lyo-Works™ OS provides a real time display of collector temperature, vacuum level and optional End-Zone™ end point detection system, shown on a 5" full color, capacitive touch screen. A variety of FreeZone Freeze Dryer accessories are available including Shell Freezers, Tray Dryers, Drying Chambers and Product Shelves. Memory to store30 programs with 16 segments each including number of steps,ramp rate, shelf temperature, hold time and vacuum level FreeZone 8 Liter Benchtop Freeze Dryers are designed forlyophilizing moderate sample loads. The compact design is ideal for labs withlimited floor space. The upright stainless steel collector coil holds 8 litersof ice before defrosting. A single 3/4 hp HCFC/CFC-free refrigeration systemcools the collector to -50C (-58F), suitable for aqueous samples.Lyo-Works™ OS provides a real time display of collector temperature, vacuumlevel and optional End-Zone™ end point detection system, shown on a 5"full color, capacitive touch screen. Models with PTFE-coated collectors thatcan withstand corrosive compounds are available.Features Upright stainless steel collector coil holds 8Lof ice before defrosting -50C (for aqueous samples) Features include hot gas defrost, side-mounted USB port and rear-mounted Ethernet connection Lyo-Works OS provides a real time display of collector temperature and vacuum level One-touch data logging and display provides information to maximize sample quality and minimize run time FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run. INCLUDED: The Labconco 700801000 FreeZone 8L -50C Benchtop Freeze Dryer with stainless steel coil and collector 115V, 60Hz includes: - Vacuum Hose - Drain Hose - Hose Clamp x 2 - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco FreeZone 6L -84C Console Freeze Dryer with Stoppering Tray Dryer and PTFE coil and collecto (more)rFeatures - Patented moisture sensorprotects the vacuum pumpby preventing refrigerationor vacuum start-up whenmoisture is detected incollector chamber area. - Vacuum control valvemaintains set point vacuumlevel to speed the freezedrying process. - Lyo-Works OS provides a real time display of collector temperature and vacuum level - Flexible programming and control of optional drying accessories - Optional End-Zone™ end point detection for flask freeze drying - One-touch data logging and display provides information to maximize sample quality and minimize run time - FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run Lyo-Works™ OS provides a real time display of collector temperature, vacuum level and optional End-Zone™ end point detection system, shown on a 5" full color, capacitive touch screen. A variety of FreeZone Freeze Dryer accessories are available including Shell Freezers, Tray Dryers, Drying Chambers and Product Shelves. Memory to store30 programs with 16 segments each including number of steps,ramp rate, shelf temperature, hold time and vacuum level FreeZone 6 Liter Console Freeze Dryers with Stoppering TrayDryers are designed for lyophilizing moderate to large loads and stopperingvials or serum bottles under vacuum. The console features a front viewingwindow and interior space for a vacuum pump (sold separately). The console'supright stainless steel collector coil holds 6 liters of ice before defrosting.Two 1/3 hp HCFC/CFC-free refrigeration systems cool the collector to -84C(-119F), suitable for low eutectic point samples including acetonitrile. TheStoppering Tray Dryer features three 16.5" x 12" processing shelves.A single 1 hp HCFC/CFC-free refrigeration system and 1000-watt electric heatercool and heat the fluid medium circulating through channels in the shelves.Lyo-Works™ OS provides a real time display of freeze dryer and tray dryerparameters on a 5" full color, capacitive touch screen. Models with PTFE-coatedcollectors that can withstand corrosive compounds are available. Features Upright stainless steel collector coil holds 6L of ice before defrosting Environmentally-friendly HCFC/CFC-free refrigeration system cools the collector to -84C (-119°F) Features include hot gas defrost, side-mounted USB port and rear-mounted Ethernet connection. The console provides interior space for vacuum pump (sold separately) Lyo-Works OS provides real time display of collector temperature and vacuum level Optional End-Zone™ end point detection for flask freeze drying One-touch data logging and display provides information to maximize sample quality and minimize run time FreeZone™ exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run Three 16.5 x 12 in. temperature-controlled (±1C), adjustable shelves with sample temperature sensors provide up to 594 sq. inches of shelf space Circulating fluid in shelves ranges from -40 and +40C INCLUDED: The Labconco 710622000 FreeZone 6L -84C Console Freeze Dryer with Stoppering Tray Dryer and PTFE coil and collector 115V, 60Hz includes: - Vacuum Hose - Drain Hose - Hose Clamp x 2 - Baffle - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco 794001010 FreeZone 2.5L -85C Triad Complete Freeze Dryer System Collector Temperature -85 (more)°C Water Removal Over 24 Hours 1.84L Ice Holding Capacity 2.5L Features - Stainless steel collector coil capable of removing 1.84 L of water in 24 hours and holding 2.5 L of ice before defrosting - Two 1/3 HP HCFC/CFC-free refrigeration compressors cool the collector to -85°C (-121°F) and work in concert with a 1000-watt heater to cool and heat fluid medium circulating through channels in the shelf. Not for use with samples containing methanol or ethanol - Processing shelf, 12.4" w x 14.5" d (31.5 x 36.8 cm). Spacing between shelf and top of chamber accommodates containers with stoppers up to 148 mm maximum height - One probe for monitoring temperature of sample in chamber - Temperature ramp and hold programming from -55°C to +50°C (-67°F to +122°F) and -75°C (-103°F) during pre-freezing. Controls temperature to ±1°C of set point. Memory to store 30 programs with 16 segments each including number of steps, ramp rate, shelf temperature, hold time and vacuum level - Full color, 5" capacitive touchscreen featuring Lyo-Works™ OS with real time display of collector temperature and vacuum level - Manual start-up buttons for collector and shelf temperature control and vacuum pull down - Alerts, diagnostic tests, user manual and defrost control - Stoppering control knob, vacuum release control knob and 1/8" OD user-supplied sterile/inert gas backfill port - Four left side-mounted neoprene valves with molded plastic knobs and fittings that accommodate 1/2" and 3/4" flask adapters - USB port, ethernet connection, and electrical receptacle for vacuum pump - Hot gas defrost with stainless steel drain pan, silicone drain hose and auto shut off at +60°C (+140°F) - Clear acrylic door, 1" thick, with silicon gasket and latch 3/4" OD vacuum connection. 36" long, 3/4" ID vacuum hose with two clamps The Labconco 794001010 FreeZone 2.5L -85C Triad Complete Freeze Dryer System is designed for multiple types of lyophilization: flask, bulk and stoppering vials. With the ability to freeze dry samples in so many different forms, the Triad's versatility and compact design make it perfect for busy labs. The upright stainless steel collector coil holds 2.5 liters of ice before defrosting. Two 1/3 hp HCFC/CFC-free refrigeration compressors cool the collector to -85°C (-121°F), suitable for aqueous or dilute acetonitrile samples. Temperature-controlled shelves range from -55°C to +50°C (-67°F to +122°F) and a maximum of -75°C (-103°F) during pre-freezing. The shelves provide pneumatic stoppering with a diaphragm, eliminating the need for compressed gas. Lyo-Works™ OS provides a real time display of collector temperature and vacuum level, shown on a 5" full color, capacitive touchscreen. A stoppering tray dryer and four valve ports are built in. The included Edwards RV8 Rotary Vane Vacuum Pump delivers excellent ultimate vacuum pressure, high pumping speeds and superior vapour handling capabilities with quiet operation. INCLUDED: The Labconco 794001010 FreeZone 2.5L -85C Triad Complete Freeze Dryer System includes: - Labconco 794001010 FreeZone 2.5L -85C Triad Benchtop Freeze Dryer 230V, 60Hz - Edwards RV8 Vacuum Pump - All Vacuum Tubing - Edwards EMF10 Mist Filter - Pump Oil - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Digital read-out of temperature: Yes Digital read-out of pressure: Yes Ultimate temperature at 20°C  (more)room temperature: -100°C Insulation: 90 mm Condenser capacity: 7 kg Condenser capacity per 24 hours: 4 kg Total volume of Condenser: 9 L Dimensions (DxWxH): 620 x 495 x 745 mm Weight: 75 kg

Heidolph 036300490 Overhead Stirrer Visco Jet Impeller inoJET, 80mm (POM) Particularly in the case o (more)f applications with very viscous media such as pastes and gels, a very reliable stirring process in the entire vessel without air entry is important. This is what the innovative stirring system VISCO JET® offers. The shape of the blades triggers an intrinsically dynamic flow, which shortens the process times with significantly better mixing results compared to conventional impellers. An all-rounder for aqueous and highly viscous substances. You can find out more about this here. The VISCO JET® 80 is ideal for vessels with the following characteristics: ideal vessel diameter: 133-200 mm, ideal ground clearance: 24 mm, ideal filling level: 133-200 mm, and ideal volume: 1,90 -6,300 ml. This VISCO JET® 80 is made of POM plastic and can be used up to max. 90°C. A polyamide coated stirrer shaft with a diameter of approximately 10 mm is included in the scope of delivery. INCLUDED: The Heidolph 036300490 Overhead Stirrer Visco Jet Impeller inoJET, 80mm (POM) includes: - 10mm Stirrer Shaft - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Heidolph Overhead Stirrer Telescope Stand The Heidolph Overhead Stirrer Telescope Stand is a reliabl (more)e and versatile stand designed for use with Heidolph Overhead Stirrers in laboratory settings. With a stand tube diameter of 32mm and an adjustable length of 725 to 1,025mm, this stand can accommodate a wide range of stirring applications. It has a leg distance of 370mm and a weight of 7.7 kg, providing stability and support for your stirring needs. This stand is compatible with Heidolph Overhead Stirrers, ensuring accurate and efficient stirring performance. The Heidolph Overhead Stirrer Telescope Stand is a valuable addition to any laboratory that requires precise and reliable stirring of samples. It is easy to assemble and adjust, making it a practical solution for a variety of applications. INCLUDED: The Heidolph Overhead Stirrer Telescope Stand includes: - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

IKA T 65 digital ULTRA-TURRAX Speed Range 1,000 to 9,500 RPM Viscosity max. 5,000 mPas Volume range  (more)(H2O) 2 - 50 l Features - Wide speed range from 1000 to 9500 rpm for high circumferential speeds with small rotor diameters - Digital speed display and electronic speed control for precise operation - Electronic overload protection ensures device safety - Easy exchange of dispersing elements via plug-in connectors - Optional stainless steel dispersing elements available for vacuum and pressure conditions - Stepless speed adjustment with a 7 segment LED speed display - Three rotor-stator configurations ensure versatility in applications Extremely powerful dispersing instrument for volumes from 2 - 50 l (H2O) for typical pilot plant stations with digital speed display. It offers a wide speed range from 1000 – 9,500 rpm that enables users to work at high circumferential speeds even with small rotor diameters. Three rotor-stator configurations guarantee a wide range of applications. Reproducible operations due to constant speed even with changes in viscosities.The device requires a 3-phase electricity supply in order to operate. The connection of the unit to the power supply must be done by a qualified electrician. Wiring diagrams are included in the manual for reference.INCLUDED: The IKA T 65 digital ULTRA-TURRAX includes: - T 65 digital ULTRA-TURRAX® - Rotor wrench - Hook wrench - Shaft wrench - Cable gland for switch cable (2 pcs.) - Hexagon L-wrench - 2 Year Manufacturer's Warranty

If you buy a Multifunctional Scale HY10 by July 31, 2024, you will receive each of these products al (more)ong with a FREE lifetime license for the Workflow Module. Multifunctional scales HY10 series is designed to fast and precise determination of mass in industrial conditions. The HY10 scales features a terminal PUE HY10 series in stainless steel housing and a single load cell weighing platform. The HY10 series scales is made of stainless steel OH18N9 including the weighing platform, and it is equipped with 10,1”colourful touch screen display, keyboard with numeric and function keys. The scales enables cooperation with an additional weighing platforms. Additionally, the HY10 series offers full functionality available in the terminal PUE HY10 series: programmable display and function keys, designing custom printout templates, designing text data indicated on terminal display. Multifunctional scales HY10 series is offered with a terminal connected to a weighing platform through a cable. Scales HY10 series is available in dual range version on surcharge. Dedicated Applications Smart Editor The application is intended for scales equipped with the HY10 terminal. It does not require any additional installations. Enter the terminal’s address in the browser address field and log in. The application enables: - remote databases editing - import of images from the graphic file to the scale - labels import from lb file to the scale - creating and preview of report, e.g. Workflow - dosing processes operation Smart Display The application allows to personalise the scale screen and display it on a computer. The Smart Display enables customization of the display screen in a simple and clear way. Place the individual elements on a grid visible on the screen. These elements can be further scaled to suit user needs. When operated directly on the scale, the user gets a new, refreshed look with the possibility of any configuration of the home screen. If the application is operated via a computer browser, it enables remote control of the desktop or setting larger mass indication window. The Workflow Module will improve work in your company. It enables developing a path of customized weighing process adapted to individual requirements of a particular production system, and next sending it to all weighing instruments cooperating with the E2R. The given process is started on the weighing instrument upon operator logging or after selecting a product, a formulation or an ingredient to which it is assigned. Modifications are made with use of convenient and intuitive interface.

If you buy a Multifunctional Scale HY10 by July 31, 2024, you will receive each of these products al (more)ong with a FREE lifetime license for the Workflow Module. Multifunctional scales HY10 series is designed to fast and precise determination of mass in industrial conditions. The HY10 scales features a terminal PUE HY10 series in stainless steel housing and a single load cell weighing platform. The HY10 series scales is made of stainless steel OH18N9 including the weighing platform, and it is equipped with 10,1”colourful touch screen display, keyboard with numeric and function keys. The scales enables cooperation with an additional weighing platforms. Additionally, the HY10 series offers full functionality available in the terminal PUE HY10 series: programmable display and function keys, designing custom printout templates, designing text data indicated on terminal display. Multifunctional scales HY10 series is offered with a terminal connected to a weighing platform through a cable. Scales HY10 series is available in dual range version on surcharge. Dedicated Applications Smart Editor The application is intended for scales equipped with the HY10 terminal. It does not require any additional installations. Enter the terminal’s address in the browser address field and log in. The application enables: - remote databases editing - import of images from the graphic file to the scale - labels import from lb file to the scale - creating and preview of report, e.g. Workflow - dosing processes operation Smart Display The application allows to personalise the scale screen and display it on a computer. The Smart Display enables customization of the display screen in a simple and clear way. Place the individual elements on a grid visible on the screen. These elements can be further scaled to suit user needs. When operated directly on the scale, the user gets a new, refreshed look with the possibility of any configuration of the home screen. If the application is operated via a computer browser, it enables remote control of the desktop or setting larger mass indication window. The Workflow Module will improve work in your company. It enables developing a path of customized weighing process adapted to individual requirements of a particular production system, and next sending it to all weighing instruments cooperating with the E2R. The given process is started on the weighing instrument upon operator logging or after selecting a product, a formulation or an ingredient to which it is assigned. Modifications are made with use of convenient and intuitive interface.