Labconco 710612000 FreeZone 6L -84C Console Freeze Dryer with PTFE coil and collector 115V, 60Hz

This listing is for a Brand New Harvest Right Medium Home PRO Freeze Dryer sold through ULMfreezedry (more)ers.comWe are stock holders in UKPrice before VAT - £4000A home freeze dryer from Harvest Right allows you to preserve the food your family loves to eat. Freeze drying locks in both flavour and nutrition and can last for years, making freeze-dried food even better than fresh! A home freeze dryer is perfect for any lifestyle. What’s Included Medium Freeze DryerPremier Industrial Vacuum Pump (Approx £1200 value)Vacuum Pump OilOil FilterStainless Steel Trays (set of 5)Guide to Freeze DryingMylar Bags (50 ct)Oxygen Absorbers (50 ct)Impulse Sealer  Features Tray space: 675 square inchesFreeze dry 4.5 to 5.8KG fresh food per batchFreeze dry up to 1360KG fresh food per year (This would require a person to use the freeze dryer 4 times a week for 50 weeks a year)  Dimensions Freeze dryer exterior dimensions: 482.6mm W x 635mm D x 736.6mm HPerfect for counter top, cart, or table. Weight of freeze dryer: 53.9KG Premier industrial vacuum pump included/no extra cost (Approx £1200 value) Power Standard UK 230v Shipping Info The medium freeze dryer ships in one package with a total weight of 160KGItem will be delivered in international shipping crate (must be purchased from Harvest Right when exporting machines out of USA)One freeze dryer in fully encased shipping crate: 920 x 770 x 1500H If you would like to collect from site, we would be able to cut down the crate to fit in smaller vans: 920 x 770 x 1050H + extra box of parts Maintenance Replace vacuum pump oil every 20 to 30 batches (takes about two minutes) Clean freeze dryer as needed. Warranty 1 Year international warranty provided by Harvest Right.

Scanvac CoolSafe Pro Freeze Dryer - 110-4 pro This was removed from a university lab where it was su (more)rplus to requirements. The unit powers up but did not cool down at all in testing. It is sold for spares/repairs. Run Hours - 69.37h

Labconco 794001010 FreeZone 2.5L -85C Triad Benchtop Freeze Dryer 230V, 60Hz Collector Temperature  (more) -85°C Water Removal Over 24 Hours 1.84L Ice Holding Capacity 2.5L Features - Stainless steel collector coil capable of removing 1.84 L of water in 24 hours and holding 2.5 L of ice before defrosting - Two 1/3 HP HCFC/CFC-free refrigeration compressors cool the collector to -85°C (-121°F) and work in concert with a 1000-watt heater to cool and heat fluid medium circulating through channels in the shelf. Not for use with samples containing methanol or ethanol - Processing shelf, 12.4" w x 14.5" d (31.5 x 36.8 cm). Spacing between shelf and top of chamber accommodates containers with stoppers up to 148 mm maximum height - One probe for monitoring temperature of sample in chamber - Temperature ramp and hold programming from -55°C to +50°C (-67°F to +122°F) and -75°C (-103°F) during pre-freezing. Controls temperature to ±1°C of set point. Memory to store 30 programs with 16 segments each including number of steps, ramp rate, shelf temperature, hold time and vacuum level - Full color, 5" capacitive touchscreen featuring Lyo-Works™ OS with real time display of collector temperature and vacuum level - Manual start-up buttons for collector and shelf temperature control and vacuum pull down - Alerts, diagnostic tests, user manual and defrost control - Stoppering control knob, vacuum release control knob and 1/8" OD user-supplied sterile/inert gas backfill port - Four left side-mounted neoprene valves with molded plastic knobs and fittings that accommodate 1/2" and 3/4" flask adapters - USB port, ethernet connection, and electrical receptacle for vacuum pump - Hot gas defrost with stainless steel drain pan, silicone drain hose and auto shut off at +60°C (+140°F) - Clear acrylic door, 1" thick, with silicon gasket and latch 3/4" OD vacuum connection. 36" long, 3/4" ID vacuum hose with two clamps The Labconco 794001010 FreeZone 2.5L -85C Triad Benchtop Freeze Dryer is designed for multiple types of lyophilization: flask, bulk and stoppering vials. With the ability to freeze dry samples in so many different forms, the Triad's versatility and compact design make it perfect for busy labs. The upright stainless steel collector coil holds 2.5 liters of ice before defrosting. Two 1/3 hp HCFC/CFC-free refrigeration compressors cool the collector to -85°C (-121°F), suitable for aqueous or dilute acetonitrile samples. Temperature-controlled shelves range from -55°C to +50°C (-67°F to +122°F) and a maximum of -75°C (-103°F) during pre-freezing. The shelves provide pneumatic stoppering with a diaphragm, eliminating the need for compressed gas. Lyo-Works™ OS provides a real time display of collector temperature and vacuum level, shown on a 5" full color, capacitive touchscreen. A stoppering tray dryer and four valve ports are built in. INCLUDED: The Labconco 794001010 FreeZone 2.5L -85C Triad Benchtop Freeze Dryer 230V, 60Hz includes: - Vacuum Hose - 2 x Hose Clamps - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco 14-Port Manifold, 24.3" w x 10.6" d x 10.3" h, for use with FreeZone Console Freeze Dryers  (more)14-Port Manifold Type 304 stainless steel manifold 14 neoprene valves with plastic knobs accommodate both 1/2 in. and 3/4 in. adapters For use with 6L, 12L, or 18L FreeZone Console Freeze Dryers Freeze Dryer, glassware, and adapters are required (not included) Includes one latching pin INCLUDED: The Labconco 7201900 14-Port Manifold, 24.3" w x 10.6" d x 10.3" h, for use with FreeZone Console Freeze Dryers includes: - Latching Pin - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco FreeZone 6L -84 C Console Freeze Dryer with Stoppering Tray Dryer and PTFE coil and collect (more)or, Purge Valve Features - Patented moisture sensorprotects the vacuum pumpby preventing refrigerationor vacuum start-up whenmoisture is detected incollector chamber area. - Vacuum control valvemaintains set point vacuumlevel to speed the freezedrying process. - Lyo-Works OS provides a real time display of collector temperature and vacuum level - Flexible programming and control of optional drying accessories - Optional End-Zone™ end point detection for flask freeze drying - One-touch data logging and display provides information to maximize sample quality and minimize run time - FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run Lyo-Works™ OS provides a real time display of collector temperature, vacuum level and optional End-Zone™ end point detection system, shown on a 5" full color, capacitive touch screen. A variety of FreeZone Freeze Dryer accessories are available including Shell Freezers, Tray Dryers, Drying Chambers and Product Shelves. Memory to store30 programs with 16 segments each including number of steps,ramp rate, shelf temperature, hold time and vacuum level INCLUDED: The Labconco 710622100 FreeZone 6L -84 C Console Freeze Dryer with Stoppering Tray Dryer and PTFE coil and collector, Purge Valve 115V, 60Hz includes: - Vacuum Hose - Drain Hose - Hose Clamp x 2 - Baffle - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco FreeZone 4.5L -50C Benchtop Freeze Dryer with PTFE coil and collector Features - Patented m (more)oisture sensorprotects the vacuum pumpby preventing refrigerationor vacuum start-up whenmoisture is detected incollector chamber area. - Vacuum control valvemaintains set point vacuumlevel to speed the freezedrying process. - Lyo-Works OS provides a real time display of collector temperature and vacuum level - Flexible programming and control of optional drying accessories - Optional End-Zone™ end point detection for flask freeze drying - One-touch data logging and display provides information to maximize sample quality and minimize run time - FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run Lyo-Works™ OS provides a real time display of collector temperature, vacuum level and optional End-Zone™ end point detection system, shown on a 5" full color, capacitive touch screen. A variety of FreeZone Freeze Dryer accessories are available including Shell Freezers, Tray Dryers, Drying Chambers and Product Shelves. Memory to store30 programs with 16 segments each including number of steps,ramp rate, shelf temperature, hold time and vacuum level FreeZone 4.5 Liter Benchtop Freeze Dryers are designed for lyophilizing light to moderate sample loads. The compact design is ideal for labs with limited floor space. The upright stainless steel collector coil holds 4.5 liters of ice before defrosting. A single 1/3 hp HCFC/CFC-free refrigeration system cools the collector to -50C (-58F), suitable for aqueous samples. Lyo-Works™ OS provides a real time display of collector temperature, vacuum level and optional End-Zone™ end point detection system, shown on a 5" full color, capacitive touch screen. Models with PTFE-coated collectors that can withstand corrosive compounds are available. Features Upright stainOptional PTFE-coated collectors withstand corrosive compounds Lyo-Works OS provides a real time display of collector temperature and vacuum level Flexible programming and control of optional drying accessories FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run. INCLUDED: The Labconco 700402000 FreeZone 4.5L -50C Benchtop Freeze Dryer with PTFE coil and collector 115V, 60Hz includes: - Vacuum Hose - Drain Hose - Hose Clamp x 2 - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Manufacturer: Qiagen Model: ESEQuant LR3 Description: The ESEQuant LR3 is a highly sensitive, robust (more) and cost-effective fluorescence measurement system for rapid testing at the point of need. This flexible and reliable system, based on a ready-to-use concept, allows you to easily develop fluorescence or colourimetric tests. Starter kits are immediately available and can be quickly adapted to different test strip or cassette formats. The powerful combination of fluorescence reader, state-of-the-art touchscreen and comprehensive Lateral Flow Studio software for developers provides an easily customisable and simple to use lateral flow system. Key features: - Small, stand-alone instrument - Customisable system with short time to market - Simplified data entry via modern touchscreen - LIS and HIS connectivity for easy integration - Fulfilment of legal requirements Technical specifications Housing: Customisable for different cassette formats Portable device with a weight of <2 kg (4.4 lb.) Small footprint of 230 x 200 x 100 mm (9.1 x 7.9 x 3.9 inches) Optics: Colourimetric or fluorescence detection Internal calibration with standards Highly sensitive Electronics: Interactive 17.8 cm (7 inch) touch screen Battery operated Embedded PC Software: Standalone operation Customisable GUI Pre-installed algorithms Connectivity: LIS and HIS connectivity Ethernet and 4 USB ports Optional: WLAN and Bluetooth Optional accessories: Internal or external barcode reader Printer RFID reader Scope of delivery: - ESEQuant LR3 - Operating instructions as PDF via e-mail The device is in absolute top condition and has been 100% tested for function.

Imaging performance Cell size: 5 – 300 microns (Cellometer CHT4-PD300 Slides are required for cells  (more)> 80 microns in diameter) Concentration range: 105 – 107 cells/ml Bright field imaging, fluorescent imaging and pattern-recognition software to quickly and accurately decluster, identify and count individual cells Fluorescent optics Excitation/Emission: 470nm/535nm Example fluorophores: Acridine Orange (+DNA) Calcein AM CFDA SYTO 9 SYTO 13 Excitation/Emission: 540nm/605nm Example fluorophores: Propidium iodide Ethidium bromide Dimensions (WxDxH): 280 x 300 x 330 mm Weight: 11.8 kg

Julabo CORIO CD-450F Refrigerated Circulator with Natural Refrigerant (R290), 115V/60Hz Refrigerant  (more) R290 Working Temperature Range -30°C - 150°C Cooling Capacity 450W (at 20°C) Features - Models for internal and external applications - Bright, white, easy to read display - Very quiet - Easy pump change-over (internal and external circulation) - External pump connections (M16x1) - USB connection - Space-saving cooling coil design yields more usable space in the bath tank - Bath lid and drain tap included - Removable ventilation grid - Refrigeration unit without side vents - Class III (FL) according to DIN 12876-1 CORIO™ CD-450F refrigerated/heating circulator with an operating range of -30…+150 °C and ±0.03 °C stability. Suitable for temperature applications with cirulation to an external apparatus or immersing a device in the bath tank. The CORIO™ CD circulator incorporates easy change-over for control of fluid circulation internally or externally. The CORIO CD includes USB-B port for PC communication and a USB-A port for datalogging. Unit fittings: M16x1 male threaded adapters including a pair of 8 and 12 mm hose barbs. 450W cooling power at 20 °C with 70W at -30 °C. Options for heating power (1kW or 2kW) and refrigerant (R290 natural refrigerant or R449A synthetic refrigerant).Class III (FL) according to DIN 12876-1.INCLUDED: The Julabo CORIO CD-450F Refrigerated Circulator with Natural Refrigerant (R290), 115V/60Hz includes: - 2 each barbed fitting for tubing 8 and 12 mm inner dia. (pump connections M16x1 male) - Power Cord - Two Year Manufacturer's Warranty

Gilson MICROMAN E PipetteThe ergonomically designed MICROMAN® E positive displacement pipettes, alon (more)g with disposable capillary piston (CP) tips, provide the highest precision when pipetting viscous, non-aqueous liquids such as oils, blood, glycerol, and more, while protecting the pipette from contamination. MICROMAN E is available in six models covering a volume range of 1 to 1000 µL. MICROMAN E relies on positive-displacement technology to improve the precision of transferring viscous and volatile liquids. The capillary piston (CP) tips eliminate the air cushion between the sample and piston so volume accuracy is not affected by the sample’s properties. Tackle these issues with MICROMAN E: - Viscous solutions—difficult to aspirate and stick to pipette tips. - Volatile solutions—leakages are created from differences between solvent vapor pressure and the air pressure within the pipette. - Cold liquids—delivered in excess amounts. - Hot liquids—under-delivered amounts. Designed with Comfort and Performance in Mind The Red Dot Award winning design of the MICROMAN E features an improved handle shape that rests comfortably in your hand, with a large push button for easy aspiration and dispensing. The volume-locking switch allows for easy volume adjustment and minimizes the risk of accidentally changing the volume during pipetting tasks. Overall Protection The positive-displacement technology of the MICROMAN E is ideal when dealing with infectious solutions and radiolabeled components. Since the disposable piston makes direct contact with the sample, the user and the pipette are protected. Within molecular biology and forensic sciences, any trace of a previous sample can lead to erroneous results and the disposable CP tips provide absolute protection against cross-contamination.

Gilson DISPENSMAN 50mLDISPENSMAN is a bottle-top dispenser for convenient, safe, and precise deliver (more)y of common laboratory solutions and solvents. Its innovative, three-position nozzle controls the dispensing of liquids, the removal of air in the system to avoid liquid loss, and includes an anti-drip safety feature that returns liquid to the bottle. Make volume changes quickly and easily with no need to open bottles, decreasing chances of contamination. Five DISPENSMAN models are available covering volume ranges from 250 µL to 50 mL.Accurate and Reproducible DispensingQuickly and easily dispense just the liquid needed with a precise volume setting. The built-in recalibration mechanism ensures reproducibility. Avoid any loss of liquid with the recycle position and recirculation valve for purging air.Safe and Easy to UseKeep your bench and other devices safe with the anti-drip system and the return of liquid into the bottle after use. The sliding volume adjuster enables simple one-hand operation and volume adjustment.Flexible • Adaptable to every type of liquid with an easy calibration • Universal chemical compatibility for many applications • Numerous bottle adaptors • Fully autoclavable at 121°CINCLUDED: The Gilson DISPENSMAN 50mL includes: - Two Year Manufacturer's Warranty