GE Healthcare F9-C Fraction Collector

The easy-to-use Model 2110 Fraction Collector provides multiple collection modes for chromatographic (more) separations. Key features include: Time or drop collection modes (or volume collection mode when connected to the Model EP-1 Econo Pump, BioLogic LP System, or BioLogic DuoFlow System) Collection of 1 drop (~50 µl) to 9 ml fractions in 80 test tubes Small chromatography columns can be mounted to drop-forming arm to minimize dead volume Manual-advance tube changes Coldroom compatibility Small footprint of 24 x 33 cm Specifications: Capacity: Eighty 13 x 100 mm glass, polypropylene, or polystyrene test tubes Collection basis: 1–999 drops in 1 drop increments, 0.05–9.99 min in 0.01 min increments, 10.0–99.9 min in 0.1 min increments Construction: Case and carousel, polypropylene; front panel, hard-coated polycarbonate Drop former: Silicone rubber Waste outlet tube: Polyurethane Operating temperature: 4 – 40°C Safety: Meets IEC 61010 and CSA 22.2 certification Dimensions (WxDxH): 240 x 330 x 250 mm

The RediFrac fraction collector is a versatile instrument for simple, straightforward fraction colle (more)ction. In its standard form it will collect up to 95 fractions in 10 – 18 mm diameter tubes. It will also collect up to 175 fractions in 12 mm tubes and up to 45 fractions in 28 mm diamter vials, with help of simple accessories (not included). Fractions may be collected in different ways, based on either time or drop counting, controlled via simple programs specified by the operator. For example, you can choose to collect uniform fractions of a fixed time period. The RediFrac will collect fractions untill all tubes are used and then switch itself off. Alternatively, fractions may be collected by specifying the number of drops per tube. Safe collection is ensured by using drop synchrnisation combined with the unique tube sensor which means the instrument cannot collect into empty positions in the tube rack. The RediFrac is designed primarily as a stand-alone instrument but can also work with other equipement. Tube rack diameter range: 10 – 18 mm Tube rack height range: 50 – 180 mm Tube rack capacity: 95 Fraction sizes time: 0.01 – 99.99 min (0.01 min increments), 100 – 999.9 min (0.1 min increments), 1000 – 9999 min (1 min increments) Fraction sizes drops: 1 – 9999 drops (1 drop increments) Memory protection: Programmed parameters and stored data are guaranteed for at least 1 hour after the instrument is switched off or in event of a power failure. Under normal conditions at least 4 days storage can be expected. Event mark: 0.2 s Max flow rate: 15 drops/sec

For sale: Refurbished Agilent 1200 series HPLC ELSD system including: 1200 series degasser (G1322A)  (more)1200 series Binary or Quaternary pump (G1311A or G1312A) 1200 series Column compartment (G1316A) 1200 series Prep Fraction Collector (G1364B) 1200 series Autosampler (G1329A) 1200 series UV detector (G1314B) Alltech 3300 series ELSD Computer with software Also available: Agilent 1100 and 1200 series with DAD, FLD, RID Detectors Agilent 1100 and 1200 series modules In combination with MS systems from Agilent, Thermo, Siecx, Waters, Shimadzu   We are not a agent/reseller. All products on our website are in stock and can be delivered with installation by our own service engineers. All systems are delivered with warranty!

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Phenometrics enable scientists to study algae under the same conditions found outdoors in the ponds, (more) but in the much more efficient confines of the laboratory. Each computer-controlled PBR uses breakthrough technology to re-create the environmental conditions such as temperature, light intensity, and CO2. Choose from pre-programmed experiments, or quickly and easily design your own, with the growth variables that are most important to you. Many researchers use the PBR to set specific parameters to maintain consistency between experiments. Most importantly, the PBR enables reproducibility, a key factor in algae research experiments. The PBR saves time and money while producing better results. Each PBR is also a measurement instrument, measuring growth rates, pH, and other factors in the algae reactor vessel, which are displayed on the computer monitor in a graph or data display. It is customizable to accommodate various probes and sensors that monitor algae culture and growth metrics. 3000 μ-Einstein LED specially designed lighting system with conical vessel that accurately mimics BOTH raceway or production tube bioreactors (controllable from 0- 3000 in steps of 25 μ-Einsteins. Fully programmable Diurnal Cycles; you set the length of sunlight day, and also the hour of peak sunlight. Fully programmable heating and cooling, linkable to the diurnal cycle; you can independently set the hour of peak heating (if different from peak sunlight). Active cooling and heating, from 5 – 50°C Algal Command Software provides for complete, simultaneous, integrated control of up to 256 bioreactors from a single computer, with collation of all data. All the reactors are linked together via Ethernet Hub. CO2 programmable and controlled from Algal Command. Mixing through active magnetic stirring and/or gas sparging. Active sparging of up to two gasses Temperature measurement True Turbidostatic measurement Field-configurable, fully autoclavable, low cost durable polycarbonate reactor vessel The reactor vessel can have as many inlets and outlets as you require 100% (+/- 10%) directly-proportional (by volume) up-scale to pond, raceway, or indoor reactor pH measured and controlled by Algal Command Custom-engineered Turbidostatic Pump allows for true turbidistatic operation; fully programmable and computer-controlled. System contains 4 reactors and pumps with laptop Culture vessel volume: 700ml Working volume: 150 – 600ml Light intensity: Variable up to full ocean sunlight at equator (>3000 mmol photons m-2 s-1) in steps of 25 Temperature control: Active cooling and heating Culture temperature range: 10 – 50°C Diurnal + heating and cooling cycles: Fully programmable and independant Ability to control and measure pH: 0 – 14, may be controlled automaticly using CO2 gas Mixing: Magnetic stirrer Gas control: Computerized, CO2 or other as required Groth rate measurement: Continuous, via turbidistat Sterilization: Entire reactor vessel assembly, including culture medium, may be autoclaved on the “Liquid” cycle Turbidistatic pump: True turbidistatic operation, fully programmable from groth fase Dimensions (HxWxD): 482 x 241 x 318 mm Weight: 7kg

Vinitex Door cabinet high DD White 1200

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

ELEMENTAR Vario Max analyzer for parts Year of manufacture: 2014 For parts