GE Healthcare F9-C Fraction Collector

The fraction collector collects fractions from ÄKTA pure purification runs. The fraction collector c (more)an be used for: • Fixed volume fractionation • Peak fractionation • Combined fixed volume fractionation and peak fractionation Fraction collector F9-C has the following functions for reducing sample spill during fractionation: • Drop Sync • Accumulator Fraction collector tubes and bottles Tube or bottle size: 3 mL: Diameter (min/max) – 10.5/11.5 mm, Height (min/max) – 50/56 mm 5 mL: Diameter (min/max) – 10.5/12 mm, Height (min/max) – 70/76 mm (2 racks included) 8 mL: Diameter (min/max) – 12/13.3 mm, Height (min/max) – 96/102 mm 15 mL: Diameter (min/max) – 16/17 mm, Height (min/max) – 114/120 mm 50 mL: Diameter (min/max) – 28/30 mm, Height (min/max) – 110/116 mm 250 mL bottle: Diameter (min/max) – (LxW) 55 x 55/64.5 x 64 mm, Height (max) – 121 mm Deep well plates: No. of wells: 24, 48, or 96 Shape of wells: Square, not cylindrical Well volume: 10, 5, or 2 ml

This INTEK LH200 Fraction Collector was removed from a university lab where it was surplus to requir (more)ements. The item powers on and is in good cosmetic condition, we are unable to test it further at our facility.

Lambda Omnicoll Franction Collector - Sampler This was removed from a university lab where it was su (more)rplus to requirements. The unit is missing a few parts and we were unable to power it on. For this reason it is sold for spares/repairs. Rack holds 90 x 5ml

Dionex ProBot w. Dosage Unit Lab This item was removed from a university where it was surplus to req (more)uirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. Also includes the following: - The Original Manual - Dionex ProBot Controller

Gilson FC203B Fraction Collector, 110/220VFeatures - Collect fractions by time, drop, or peak to sui (more)t all your LC applications - Choose the compact FC 203B for small-capacity collection or the FC 204 for large volumes and capacities - Accept a wide variety of collection vessels, including microplates, microvials, and tubes - In peak mode, collectors monitor a detector signal and identify peaks using either an adaptive-slope algorithm or a specified millivolt threshold - Up to 10 programmable time windows can be added for collecting only what you want, while discarding the column’s void volume, peaks of no interest, and equilibration volumes - Operate as stand-alone instruments with an easy-to-use keypad, or can be controlled through your PC via TRILUTION® LC Software The FC 203B Fraction Collector is an essential tool for low-pressure chromatography and fractionation systems. With its versatile design, it holds one rack and can accommodate various sample configurations, including up to 128 fractions in 12x75mm tubes or up to 105 fractions in 13x100mm tubes. Additionally, it can collect samples in a shallow- or deep-well microplate format. For enhanced efficiency, an optional multicolumn adapter is available, allowing collection from up to 8 separate channels simultaneously. INCLUDED: Gilson FC203B Fraction Collector, 110/220V includes: - Gilson FC203B Fraction Collector - User's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Gilson FC203B Fraction Collector w/ Diverting Valve, 110/220VFeatures - Collect fractions by time, d (more)rop, or peak to suit all your LC applications - Choose the compact FC 203B for small-capacity collection or the FC 204 for large volumes and capacities - Accept a wide variety of collection vessels, including microplates, microvials, and tubes - In peak mode, collectors monitor a detector signal and identify peaks using either an adaptive-slope algorithm or a specified millivolt threshold - Up to 10 programmable time windows can be added for collecting only what you want, while discarding the column’s void volume, peaks of no interest, and equilibration volumes - Operate as stand-alone instruments with an easy-to-use keypad, or can be controlled through your PC via TRILUTION® LC Software - 3-way diverter valve prevents contamination of collected fractions (standard on the FC 204, optional on the FC 203B) The FC 203B Fraction Collector is an essential tool for low-pressure chromatography and fractionation systems. With its versatile design, it holds one rack and can accommodate various sample configurations, including up to 128 fractions in 12x75mm tubes or up to 105 fractions in 13x100mm tubes. Additionally, it can collect samples in a shallow- or deep-well microplate format. The FC 203B is available with or without a diverter valve, providing flexibility based on experimental needs. For enhanced efficiency, an optional multicolumn adapter is available, allowing collection from up to 8 separate channels simultaneously. INCLUDED: Gilson FC203B Fraction Collector w/ Diverting Valve, 110/220V includes: - Gilson FC203B Fraction Collector w/ Diverting Valve - User's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Memmert ICP260 Refrigerated Forced Circulation Incubator 256L, 115V Setting Temperature Range -12°C (more) to +60°C Setting Accuracy Temperature 0.1 °C Chamber Volume 256 L (9 cu. ft.) Features - Working temperature range from -12°C to +60°C with optimum performance between +16°C and +34°C - Large 256 L (9 cu. ft.) capacity - Inner glass door provides visibility while maintaining internal conditions - TwinDISPLAY with digital PID-microprocessor controller and high-definition TFT-color displays - Energy-efficient, CFC-free cooling system with automatic defrosting - Precise temperature control with a setting accuracy of 0.1°C - Durable construction with rear zinc-plated steel and stainless steel interior - Comprehensive safety features including AutoSAFETY over- and undertemperature protection The Memmert ICP260 Refrigerated Forced Circulation Incubator 256L, 115V offers precision temperature control within a -12°C to +60°C range, making it ideal for sensitive applications in laboratory settings. This model features a generous 256 L (9 cu. ft.) capacity, with a robust stainless steel interior and an inner glass door, ensuring easy observation without disturbing internal conditions. Equipped with TwinDISPLAY, an adaptive PID-microprocessor controller with high-definition TFT-color screens, the ICP260 provides reliable, intuitive control of temperature, fan speed, program time, and more, with settings in both Celsius and Fahrenheit. The incubator’s air jacket heating system delivers uniform heat distribution while the energy-efficient, CFC-free cooling system with automatic defrosting keeps operations smooth and sustainable. Safety is a priority with built-in AutoSAFETY over- and undertemperature protection, visual and acoustic alarms, and a mechanical temperature limiter that activates if the heating exceeds nominal limits. From its durable zinc-plated housing to its AtmoCONTROL software support for efficient programming and data management, this Memmert incubator combines advanced functionality with user-friendly design, meeting high standards for laboratory applications. INCLUDED: The Memmert ICP260 Refrigerated Forced Circulation Incubator 256L, 115V includes: - 2 Stainless Steel Grids - USB Drive w/ Software & AtmoCONTROL Manual - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

MA X7.IC.A moisture analyzers are hi-tech measuring instruments intended for quick determination of  (more)relative moisture content, dry mass content and other parameters in samples of different substances. MA.X7.IC.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean – operator does not touch moisture analyzer’s housing. Removing any shocks caused by manual closing of the chamber – the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X7.IC.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and – thanks to databases – particular drying process may be set for a specific product. Highlights of X7 Series moisture analyzers: Automatic opening and closing of the drying chamber 7” capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X7.IC.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X7 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.

Ohaus 30400168 Modular Heat Block, 5 x 50 mL Conical Tubes The Ohaus 30400168 Modular Heat Block, 5  (more)x 50 mL Conical Tubes is crafted from solid anodized aluminum to ensure durability and efficient heat transfer. This modular block is compatible with Ohaus HB Series Dry Block Heaters. INCLUDED: The Ohaus 30400168 Modular Heat Block, 5 x 50 mL Conical Tubes includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Eppendorf 4 x 50ml Adapters, Cat. # 5804784006 The Eppendorf 4 x 50ml Adapters, Cat. # 5804784006 ar (more)e for use with the Eppendorf S-4-72 Swing Bucket Rotor for the Eppendorf 5804/R and 5810/R Centrifuges. These adapters feature a capacity for 4 x 50ml conical bottom tubes each with the maximum tube dimensions (Diameter x Height) of 31mm x 120mm. This is a two piece set, and the adapters are new in packaging. INCLUDED: The Eppendorf 4 x 50ml Adapters, Cat. # 5804784006 includes: - Set of 2 Adapters - Full 6 Month Parts and Labor Warranty Eppendorf 4 x 50ml Adapters, Cat. # 5804784006 SpecificationsBottom ShapeConicalRotor CompatibilityEppendorf S-4-72 Swing Bucket Rotor