Worthington LABS-80K Cryogenic Vessel With Full Racking Lab

MVE CryoShipper 8.5 ltr with ShipsLog 3 Temperature data logger Lab This item was removed from a uni (more)versity where it was surplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. Neck Opening in (mm): 8.50 (216.0)Overall Height in (mm): 21.5 (546)Outside Diameter in (mm): 14.50 (369) Also includes the following: ShipsLog 3 Temperature data logger.

Oxford Cryosystems Cryostream 600, Cold Head & Reactivation Heater Lab This was removed from a u (more)niversity lab where it was surplus to requirements. The system powers up and is in good cosmetic condition. The Reactivation Heater was tested to  108.8 ˚C with a digital thermometer (not included).

CTI Cryogenics Cryo Torr 8 High Vacuum Pump w/ 8001 Controller & SCW Compressor This was removed (more) from a university lab where it was surplus to requirements. The Cryo pump is in excellent cosmetic condition but the rest of the system is in good to reasonable condition. It was in full working order when last used. The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

SPEX SamplePrep Freezer/Mill 6770 Cryogenic Mill This item was removed from a university laboratory  (more)where it was surplus to requirements. The mill powers on and is in fair cosmetic condition. We are unable to conduct further testing at our facility. Specifications: - Model: 6770 - Serial No.: 10305

Benchmark H5100-2CR 24 x 1.5/2.0ml Cryovial Block for MultiTherm Touch The Benchmark H5100-2CR 24 x  (more)1.5/2.0ml Cryovial Block for MultiTherm Touch is designed for use with the Benchmark H5100-HCT MultiTherm Touch Heating and Cooling Shaker. The H5100-2CR is not compatible with the H5100-HL Heated Lid. INCLUDED: The Benchmark H5100-2CR 24 x 1.5/2.0ml Cryovial Block for MultiTherm Touch includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Life Technologies Floid Cell Imaging Station This was removed from a university lab where it was sur (more)plus to requirements. The unit powers up but is stuck in a boot loop. It is in good cosmetic condition with marks from use. It is sold for spares/repairs With it are; 1x Floid Rescue Disk Memory Stick 1x Evo Floid Recovery Memory Stick 1x GlobTek 9 volt Power SupplyM/N: GT-81081-6012-T3

This listing is for a Thermo Scientific 75005701 Centrifuge Rotor. The unit is in full working cond (more)ition and is ready for immediate release. Thermo Scientific 75005701 Centrifuge Rotor The 75005701 Centrifuge Rotor is a high-capacity swinging bucket rotor engineered for use with Thermo Scientific Sorvall ST8 and Heraeus Megafuge 8 centrifuges, designed for efficient and safe sample processing. Key Features: Capacity: Holds 4 round buckets, allowing for versatile sample volumes and formats, ideal for various laboratory applications. Swinging Bucket Design: This design promotes efficient sample processing, enabling the rotor to tilt during centrifugation for effective separation and easier loading/unloading. ClickSeal Biocontainment Lids: These lids ensure secure, one-handed operation, minimizing contamination risks and enhancing user safety during sample handling. Adaptors for Blood Collection Tubes: Specifically designed adapters accommodate 5/7mL and 10mL blood collection tubes, making it suitable for clinical and research applications involving blood samples. Compatibility: Tailored for use with Thermo Scientific Sorvall ST8 and Heraeus Megafuge 8 centrifuges, ensuring seamless integration into laboratory workflows. Specifications: Type: Swinging bucket rotor Capacity: 4 round buckets Adaptors: Available for blood collection tubes (5/7mL and 10mL) Compatibility: Thermo Scientific Sorvall ST8, Heraeus Megafuge 8 centrifuges

Boekel Scientific 230402 Big SHOT III, 10-bottle Hybridization oven, 115VWhether you areworking with (more) Northern Blots, Southern Blots, Microarrays or another applicationthat requires incubation, you will find the Big SHOT III™ Hybridization Oven isa perfect fit for the job. Thisunit is designed to provide rapid heat-up, excellent temperature stability andefficient mixing for all types of hybridization and incubation applications. PID temperature controller for rapid heat up and excellent temperature stability Forced air convention Settable over temperature safety thermostat Programmable digital timer - up to 99 hours, 59 minutes Supplied with a standard carousel Carousel speed up to 60 RPM in 1 RPM increments Reversible door Stackable Easy to remove stainless steel drip pan 2 year warranty INCLUDED: The Boekel Scientific 230402 Big SHOT III, 10-bottle Hybridization oven, 115V includes: - Standard Carousel - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

LABORATORY INCUBATORS CLN SMART POL-EKO CLN - NATURAL AIR CONVECTION CLN Series incubators maintain  (more)a constant temperature from 5°C above room temperature to a maximum of 100°C. Large touch display, programming, alarms, lock, stainless steel interior are just a small part of what you will find below! Continue reading, you will be surprised! ABSOLUTE CONTROL The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PANEL? - Sharp 4.3' color touch screen - Quick and easy data transfer: via LAN or USB - Fast, multi-segment, time and temperature programming - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Controls can be managed even when wearing latex gloves - Recording of the minimum, average and maximum temperature value for each segment - Overview of the set and current parameters during operation - Operation in temperature or time priority mode - ... and much more More and more? POL-EKO has already thought about it. For those who want cutting-edge functions and the freedom of transfer and remote use, POL-EKO offers you the SMART PRO controller. You can find all the differences between the SMART and SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. With the SMART PRO versions, more accessories and options will also be available. QUALITY FIRST Resistant. Durable. POL-EKO incubators are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The CLN SMART series incubators are built with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Double door: solid external; glass interior - Powder coated sheet metal structure (graphite front panel) - Interior in acid-resistant stainless steel according to DIN 1.4301 - Insulated door with lock - Protection class 2.0 - Protection class 3.1 (DIN 12880) as option → - Stainless steel shelves - USB port for downloading recording data, events, manuals, service - LAN port - Open door alarm - Access port for external sensor - Rear air-flap - Quality control protocol (at +37°C) CLN SMART SERIES The six models of the CLN series cover most of your needs: from mini stoves to the 245 liter internal volume model. For larger volumes, look at the SLW series stoves. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view. 1 - Rating plate 2 - Access port ø30mm for external sensor 3 - Internal glass door (for CL models) 4 - Adjustable feet 5 - Shelf 6 - External solid door 7 - Temperature sensors 8 - Open door sensor 9 - Touch control panel 10 - USB port 11 - Handle with key lock 1 - Main switch 2 - Connector for connecting a hose with nitrogen (only for SLWN models) 3 - Air-flap 4 - LAN port 5 - Fuse 6 - Main power socket C20 OPTIONS POL-EKO allows you to increase the possibilities of your incubator with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. - Stainless steel shelf - Perforated shelf - Stainless steel basins - Door with viewing window - LabDesk software - IQ OQ PQ calibration and qualification - Overtemperature protection class 3.1 according to DIN 12880 - Backup battery for the display in case of power failure - Clean contact - LAN cable - Non-standard 20 / 60 / 100 mm access door - Additional 30 mm access door - Castors - Table with castors

LAUDA Variocool: Versatile circulation chillers from 1200W to 10 kW used between -20°C and +80°C to  (more)dissipate process heat in laboratories, small plants or production. LAUDA Variocool circulation chillers convince with their space-saving design and the versatility offered by a wide variety of options. They are circulation thermostats suitable for use with non-flammable heat transfer liquids within a moderate temperature range. The new control panel design and color TFT display make making changes very simple and intuitive. Various options in power kW, pump pressure / flow rate and tank size offer a wide range of choice for the customer, adapting better to his needs. Contact us to understand the model that best suits your needs. All models (except VC 600) are available in the air-cooled or water-cooled (W) versions and equipped with fixed swivel castors. High performance circulation chillers starting with the VC 5000 are available with sound insulation or outdoor installation option. Cooling performance of the Variocool VC 5000 model (measured with ethanol): - a 20°C, 5.00 kW - a 10°C, 3.90 kW - a 0°C, 2.75 kW - a -10°C, 1.70 kW - a -20°C, 1.00 kW Notable features - Adjustable bypass for pressure limitation - Top filling opening, drain cock on the back - Integrated programmer with 150 segments, divisible into 5 programs - Electronic level indicator with low level alarm - SmartCool system for energy-saving digital control of cooling, including automatic compressor control - Temperature graphs on display Examples of specific applications - Refractometer - Polarimeter - Disposable bioreactors - Extruder for food production - Micro reactors - Reactive control in chemical / pharmaceutical environments - Climatic chambers - Spatial simulation - Electric mobility; battery test - Test benches - Stress test - Crystallization regulation - Lyophilization - Micro structures - Painting plants Accessories included Nozzles for pump connections; screw cap. Various options in power (kW), pump pressure/flow rate and tank size offer a wide range of choice for the customer, adapting better to his needs. Contact us to understand the model that best suits your needs. Simple control panel with large TFT display with lots of information. Front panel of the LAUDA Variocool easily removable for fast maintenance and modifications. Easily upgradeable with different interfaces (analog module, contact module, RS 232/485, Profibus, Ethernet-USB module). USB Type B Interface. Connections located on the back of the Variocool: inlet/outlet pump connection; bypass adjustments. Large frontal pressure display. Pump performance graph of LAUDA Variocool heating chillers. Overview of the technical characteristics of the Variocool LAUDA models. TECHNICAL VISUALIZATION 1 - Filler nozzle with cover 2 - Control panel 3 - Pressure gauge 4 - Mains switch 5 - Alarm output and module bays 6 - Front panel (ventilation openings only in case of air-cooled devices) 7 - Ventilation openings (on both sides) 8 - Four castors (front castors with locking brake) 1 - Pump connection, outflow 2 - Bypass adjusting wheel 3 - Pump connection, return flow 4 - Drain tap 5 - Connecting sleeve for water cooling outlet (only available for water- cooled devices) 6 - Connecting sleeve for water cooling intake (only available for water- cooled devices) 7 - Ventilation grid 8 - Rating label 9 - Power supply 10 - Fuses (up to and including VC 3000 (W)) 1 - Light sensor 2 - Pressure gauge 3 - Mains switch 4 - Entry key and arrow keys 5 - Soft keys (left and right) 6 - USB interface Type B (on the side of the control panel) 7 - TFT display

HX7 H scale’s multi functions Many functions, many interfaces and great robustness (IP66/ IP68 (more)) mean many possibilities for you to use this advanced scale. Tomorrow you can apply it to a different process than today – that’s the multifunctionality. That’s the saving! Use the potential Barcode scanners, receipt printers, label printers, external displays, control buttons, light signalling towers and other controlling/ signalling devices – thanks to multipurpose software, HX7 scale can work with all of them. You can easily connect them thanks to the fact that the balance is equipped with interfaces: RS232, RS485, USB, Ethernet, 4 IN/ 4 OUT. Optionally, the balance can be equipped with 12 IN/ 12 OUT and analog output module. You can find all accessories in our regular offer. And if you have questions about compatibility, our experts will help you. Easy and pleasant Simple and convenient operation with a 7-inch color display. Perfectly visible messages additionally supported by bargraph. The top part of the operation panel features a bar graph consisting of 9 red and green diode fields. The bar graph is a graphic visualisation informing the user on a current net weight of a product presented with reference to the scale range or declared min and max thresholds. The bracket allows the terminal to be placed on any flat horizontal surface or screwed to the wall with adjustable angle. The power of steel The use of stainless steel guarantees you a long life for the scale. It is not afraid of contact with moist objects or accidental splashes. The construction of the scale is made of a stainless steel. This guarantees you work for many years. Not just weighing But also parts counting, dosing, percent weighing and formulations. The power of HX7’s working mods. Do you need ALIBI? There you have it. ALIBI memory is like a black box of a scale. It records all measurements taken on the device. The ALIBI memory cannot be modified or erased. Referring to stored weighings you can generate weighing reports, formulation reports and reports on performed control processes. Single weighing is stored in the ALIBI memory as long as it is specified by a Weighing Storage Period (days) parameter.