NEW! Eppendorf CryoCube F101h F101 ULT Ultra Freezer Tiefkühlschrank 101L -86C

CryoBox Freezer Rack THERMO SCIENTIFIC 5038-4322 Brand new in original packaging For standard cryoge (more)nic boxes with ease with these durable stainless steel and aluminum freezer racks, which fit most standard chest freezers and upright freezers Part number: 5038-4322 For 12 standard Cryoboxes 12-place rack (4X3) Type: horizontal Dimensions: 22.5 x 44.4 x 14.3 cm (lxWxH)

Statebourne Cryolab 50 Liquid Nitrogen Dewar This was removed from a university lab where it was su (more)rplus to requirements. The unit is in good cosmetic condition but has not been tested at our facility.

Statebourne Crogenics Biostor 5 Liquid Nitrogen Dewar This was removed from a university lab where i (more)t was surplus to requirements. The unit is in good cosmetic condition but has not been tested. Internal Dimensions are: D 70cm x W 40cm. Item has 6 storage containers each with 9 draws.

Rigaku X-Stream 2000 Cryogenic Crystal Cooler System This system was removed from a university lab w (more)here it was surplus to requirements. The Rigaku X-Stream 2000 main unit did not power on when tested with a 3 Phase test plug. It is in good cosmetic condition with minimal wear. The cryogenic crystal cooler powers on and is in good condition with minimal wear. It has passed a PAT test, but no further testing was performed. Due to the main unit not powering on, this system is listed as Spares/Repair. Specifications:- Main Unit - Model: CP830 - Serial No.: 1831322-240105A - Cryogenic Crystal Cooler - Model: XS-2000 - Serial No.: 800150

This Reichert-Jung Cryocut E  Type - 97 00 51 Cryostat Microtome was removed from a university  (more)lab where it was surplus to requirements. The unit powers up and is in full working order. It is in reasonably good cosmetic condition but has some marks from use.

This GT 55 Liquid Nitrogen Dewar with 6 x Storage Racks was removed from a university lab where it w (more)as surplus to requirements. The unit is in reasonable cosmetic condition with some marks from use. It has not been tested. There are 6 Racks inside with drawers that hold 5ml tubes.

Hersteller:  Philips Modell:  Zinc - Hohlkathodenlampe P/N:  9423 390 30301 Anschluss: 7-Pin Entspr (more)echende OEM Bestellnummern: 4169DCPP867UC9423 390 303013QNY/Zn-U Stammen aus dem Bestand eines Tja Solaar Unicam 969 AASWir haben noch weiter Lampen - siehe letztes Foto (nicht Bestandteil dieses Angebots) guter, wenig gebrauchter Zustand - voll funktionsfähig.     We are selling here: Manufacturer: Philips Model:  Zinc - Hollow Cathode Lamp P/N:  9423 390 30301 Connection: 7-Pin Equivalent OEM P/N: 4169DCPP867UC9423 390 303013QNY/Zn-U From the stock of a Tja Solaar Unicam 969 AAS.We have other Lamps available - please see therefore the last picture (not part of this auction) good, used condition - fully functional.

Capacity: 1325 l Doors: 2 glass doors (double layer) Air circulation: forced air circulation by inne (more)r fan Defrost: fully automatic defrost cycle Temperature range: 1ºC to 8ºC (factory set on 4ºC) Temperature precision: ± 0.5ºC Temperature stability: ± 1ºC Temperature uniformity: ± 2ºC Microprocessor: adjustable set-point, high alarm, low alarm, door alarm (audible, visual and remote alarm) Cabinet material: stainless steel inside and outside Dimensions (WxDxH): 1420 x 800 x 1985 mm Internal dimensions (WxDxH): 1300 x 675 x 1380mm Shelves (WxD): 530 x 650 mm Weight: 245 kg

The water vapour permeability determination set is used in moisture analyzers of max capacity greate (more)r than 50g. Water vapour permeability is a feature that determines the quality and practicality of application of a given fabric. Clothes or footwear made of materials of inadequate permeability may be unhealthy and uncomfortable. In order to determine water vapour permeability, RADWAG moisture analyzer has to be equipped with a water vapour permeability determination set. The developed method of testing water vapour permeability consists in placing required amount of water in a vessel made of aluminium alloy, inside which a fabric sample, cut using a blanking die, is clamped. Prior to the test, the sample should be left in a room with stable ambient conditions for 24 hours. It is recommended to place the vessel containing water and sample in the moisture analyzer and start the drying process at 40°C. The advantage of this method is a very short drying time. It takes up to 50 minutes to obtain the result. In contrast, measurement carried out using standard method takes up to 72 hours. Measurement results are presented in mg H2O / 1000 mm2 / 24h or as the percentage amount of water vapour passed through the material to the amount of water vapour passed without the tested fabric.

Labconco FlaskScrubber Glassware Washer, freestanding with windowProvide thorough, efficient, andeco (more)nomical cleaning that meets demanding laboratory standards by outfittingyour lab with a Labconco FlaskScrubber™ Glassware Washer.Ideal for college and university,government, pharmaceutical, and industrial labs or any facility utilizingreusable glassware. Choose from single-rack FlaskScrubber series models ordual-rack SteamScrubber models. Accessory spindle and open racks are designedspecifically for laboratory glassware and are interchangeable between models.Operating Features Achieve higher water temperatures for enhanced washing, faster drying, and sanitizing LCD information center for customizing cycles and monitoring operations, including internal water temperature (C or °F) and alarms High water circulation rates for thorough cleaning: 96 gal./min. (363L/min.) when operated on 115V 60Hz, and 112 gal./min. (424L/min.) on 230V 50/60Hz Dual pumps: one for washing and one for draining, to reduce potential for cross-contamination Built-in purified water pump brings unpressurized or pressurized purified water into tank for up to six pure water rinses Built-in steam generator produces hot vapor to penetrate and remove dried residue for cleaner glassware Manual-fill dispensers for detergent (powder or liquid) or rinse aid solution Two user-set cycle programs User-set delayed start (up to 8 hours) Optional tempered safety glass viewing window with 25w interior light Environmentally Friendly: Item contains environmental attributes or features (e.g. water conserving, lead-free, etc.) as described in the item detail Structural Features Type 304 brushed stainless-steel door, tank, and upper and lower wash arms Freestanding models have stainless-steel exterior sides and top One-piece, stainless-steel, fine mesh particle drain filter traps debris in tank to protect pumps Four leveling feet 0.375 in. female NPT inlet fitting for hot water tap connection Factory-installed drain hose and band clamp Outfitted for washing narrow-necked flasks Supplied with one Type 304 stainless-steel spindle rack with 36 detachable large spindles, 18 holders, 36 clips, and 10 interchangeable small spindles Built-in forced-air drying through the spindles and throughout the tank up to 99 min. and programmable from 38° to 70C (100° to 150°F) Factory-set cycle programs: For 208/230V models, 10 (add INTENSE, INTENSE PLUS and EXTREME) Click Here to View Product Video INCLUDED: The Labconco 412101000 FlaskScrubber Glassware Washer, freestanding with window, 115V, 60Hz includes: - Lower Spindle Rack w/ Glassware Holders - Small Spindle Accessory Kit - Leveling Feet x 4 - Screws x 2 - Hose Clamp - Drain Hose - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Gilson DISPENSMAN 25mLDISPENSMAN is a bottle-top dispenser for convenient, safe, and precise deliver (more)y of common laboratory solutions and solvents. Its innovative, three-position nozzle controls the dispensing of liquids, the removal of air in the system to avoid liquid loss, and includes an anti-drip safety feature that returns liquid to the bottle. Make volume changes quickly and easily with no need to open bottles, decreasing chances of contamination. Five DISPENSMAN models are available covering volume ranges from 250 µL to 50 mL.Accurate and Reproducible DispensingQuickly and easily dispense just the liquid needed with a precise volume setting. The built-in recalibration mechanism ensures reproducibility. Avoid any loss of liquid with the recycle position and recirculation valve for purging air.Safe and Easy to UseKeep your bench and other devices safe with the anti-drip system and the return of liquid into the bottle after use. The sliding volume adjuster enables simple one-hand operation and volume adjustment.Flexible • Adaptable to every type of liquid with an easy calibration • Universal chemical compatibility for many applications • Numerous bottle adaptors • Fully autoclavable at 121°CINCLUDED: The Gilson DISPENSMAN 25mL includes: - Two Year Manufacturer's Warranty