Leica Reichert MM80 E Mirror Cryo Fixation Unit

This GT 55 Liquid Nitrogen Dewar with 6 x Storage Racks was removed from a university lab where it w (more)as surplus to requirements. The unit is in reasonable cosmetic condition with some marks from use. It has not been tested. There are 6 Racks inside with drawers that hold 5ml tubes.

Thermo Forma Model 8031 Liquid Nitrogen Dewar Tank This was removed from a university lab where it w (more)as surplus to requirements. The unit is in good cosmetic condition but has not been tested at our facility. 8 x Storage Racks - 12.5 x 8 x 48.5cm9 sections per pack - 12.5 x 7.5cm

MVE CryoShipper 8.5 ltr Lab This item was removed from a university where it was surplus to requirem (more)ent. It is in good cosmetic condition, we are unable to test it at our facility. Neck Opening in (mm): 8.50 (216.0)Overall Height in (mm): 21.5 (546)Outside Diameter in (mm): 14.50 (369) ShipsLog 3 Temperature Lid fitted.The data log is not included. Last calibrated: 04:01:2021.Last serviced: 04:06:2021.

MVE CryoShipper 8.5 ltr with ShipsLog 3 Temperature data logger Lab This item was removed from a uni (more)versity where it was surplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. Neck Opening in (mm): 8.50 (216.0)Overall Height in (mm): 21.5 (546)Outside Diameter in (mm): 14.50 (369) Also includes the following: ShipsLog 3 Temperature data logger.

RADWAG-manufactured susceptometer enables carrying out measurements of magnetic susceptibility and m (more)agnetization of weights of E1 and lower classes in accordance with OIML R111. Modular design, upon disassembling respective module, enables using the susceptometer as a mass comparator or a balance. Compared to the previous model, the new one features option of internal adjustment and higher readability: [d] =1 μg for loads ranging from 2 g to 50 kg.

Do you need a moisture analyzer that not only determines moisture or dry matter content with impress (more)ive accuracy, but also performs a digital audit, responds to your voice commands and sends you light messages? If so, learn about the functionality of the ELLIPSIS series of moisture analyzers: It Dries in 4 Ways The MA 5Y.IC Moisture Analyzer offers you four drying profiles: standard, mild, fast and step. The standard profile is the usually used drying profile. It allows the most accurate determination of moisture content. The mild profile is designed for drying substances that are sensitive to the rapid heat released by the filaments, which heat full power at the initial stage of the process. An example of such a substance is leather. You will use the fast profile for samples with significant moisture content – of the order of even several tens of percent. The step profile will be ideal for drying substances that contain more than 15 percent moisture. Within this profile you can define any three temperatures. You will choose the values of temperature and duration of heating experimentally. What Drying Temperature Should I Set? The drying temperature determines the duration of the process. Its value depends on the type of material. If the temperature is too low, it will under-dry the sample and, consequently, unnecessarily increase the measurement time, while if it is too high, it will cause a burning effect on the material. The drying temperature for the traditional (oven) method is determined by industry or factory standards. If there are no standards, you will select the temperature experimentally. The maximum drying temperature on the MA 5Y.IC Moisture Analyzer is 160°C. How Do I Finish the Drying? In 4 Ways The MA 5Y.IC Moisture Analyzer has four finish modes: automatic, manual, time-defined and user-defined. Automatic mode You define the moisture loss limit value in 60 seconds. When the moisture analyzer reaches the set criterion, the measurement will automatically end. Manual mode You terminate the measurement yourself by pressing the STOP button. Time-defined mode The measurement ends after the set time has elapsed regardless of the result. You have up to 99 hours 59 minutes to manage! User-defined mode When you remove all volatiles from a sample, by definition, its mass should be constant. During drying, the dry mass of the sample is defined by a condition: if the mass of the sample is stable within 1 mg during the observation time (Auto 1-5), we consider that all volatile components have been removed from its structure. Digital Weighing Auditor Ensures that your moisture analyzer is ready for use. What is more, it informs about the need for a moisture analyzer inspection or a periodic audit of the moisture analyzer’s accuracy and sensitivity. 10-Inch Display Bigger screen – 10’’ – means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Uncompromising User Verification For the first time ever, the moisture analyzer will verify the user using a password, RFID card, fingerprint reader, facial recognition mechanism, or any combination of these. Ambient Light – an Innovative Way for the Moisture Analyzer to Communicate With the User The light colour will tell you about status, process results, procedures, or alerts. Hotspot Use the moisture analyzer on any device connected to it. This can be a smartphone, tablet, or computer. RFID ELLIPSIS works with RFID tags* that can be used to tag your products or formulation ingredients in the database. They can also be used to identify a user. Live Note – Note Down Your Conclusions It’s the first time you can add a voice memo to a measurement series or procedure report. If you prefer to write it down, ELLIPSIS allows you to add a text note. Handy Library This is where a series of recent measurements or a report ready for digital signature, according to 21 CFR Part 11, can be found. Widgets Prepared to display what you need most at any given moment. 21 CFR Part 11 Do you work in the pharmaceutical industry? Do you need a digital signature? We are offering the moisture analyzer which as a standalone fully meets the requirements of 21 CFR Part 11/ EU GMP Annex 11. Full data security Electronic signatures Validations Electronic records Audit trails Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. * RFID ISO/IEC 14443 Type A, 13.56 MHz

Scilogex SCI40-S Overhead LED Digital Stirrer Bundle, 110-220V Stirring Capacity 40L Viscosity Maxim (more)um 50,000mPas Speed Range 50 to 2,200 RPM Features - A wide range of speed from 50 to 2200rpm - Brushless DC motor for long life and maintenance free - Analog speed controls displayed on the LED display for monitoring actual speed - High torque for viscous medium stirring - Over torque protection automatically stops the motor - Safety circuits allow for safe stop function in anti-stall or overload condition - A through-shaft design allows for easy adjustment of the impeller position - In the event of power loss, the stirrer will resume stirring at the preset speed when the power returns - Pass through stirrer rods accepted - cTUVus approved for UL and CSA Scilogex overheard stirrers can accomplish the most demanding tasks and provide high safety and increase performance. They are widely used in chemical synthesis, pharmaceutical synthesis, and physical and chemical analysis, as well as petrochemical industries. These products have a high degree of reliability and performance, and are protected by a two year manufacturer’s warranty. INCLUDED: The Scilogex SCI40-S Overhead LED Digital Stirrer Bundle, 110-220V includes: - 18900071 Stainless Steel Cross Stirrer - 18900131 Stand - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Julabo DYNEO DD-BC12 Heating Circulator with Digital Output, 115V/50-60Hz Working Temperature Range  (more) 20°C to 200°C Heating Capacity 1000W Fluid Type Water, Silicone Features - Suitable for internal and external applications - Powerful and infinitely adjustable pressure pump - Flow rate 27 l/min, pressure 8.7 psi - Easy switching between internal and external circulation - Large color TFT display, multilingual interface - Central rotary knob (controller) simplifies operation - Integrated programmer for 8 x 60 program steps - Integrated external Pt100 connection - USB port - RS232 interface or analog interfaces - Bath cover included with delivery - Integrated drain makes emptying liquid easy and safe - High-quality thermal insulation of the bath tank The DYNEO™ heating circulators are suitable for temperature applications with circulation to an external apparatus or immersing a device in the bath tank for temperatures to 200°C. The DYNEO™ DD circulator incorporates easy change-over for control of fluid circulation internally or externally. Unit fittings M16x1 male threaded adapters including a pair of 8 and 12 mm hose barbs. Systems include insulated stainless-steel tanks with an integrated drain valve. Features a color TFT display with central rotary knob controller, multi-lingual interface, integrated programmer, Pt100 port for external temperature control. USB connection for external PC control and data-logging; Digital option includes RS232 port; analog option includes analog interface for voltage or current control. PID temperature control provides ± 0.01°C stability. Infinitely variable centrifugal pump capacity of 8-27 L/min with pressure to 1.5-10.2 psi. Class III (FL) according to DIN 12876-1. INCLUDED: The Julabo DYNEO DD-BC12 Heating Circulator with Digital Output, 115V/50-60Hz includes: - 2 Each Barbed Fitting for Tubing 8 and 12 mm Inner Dia. (Pump Connections M16x1 Male) - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Boekel Scientific 260700 Microplate Incubator, 115V The Boekel Scientific 260700 Microplate Incubato (more)r, 115V isgreat for places with little space or when you need a dedicated incubator formicroplates or petri dishes. The unit has set temperature of 37C and this canbe adjusted with the dial in the back of the unit. The chamber is accessedthrough a see-through, flip-up door. A temperature indicating liquid crystalstrip is used to monitor the temperature. Features•Small design•Liquid crystal temperature indication strip•Flip-up see through door•Ideal for microplates and small petri dishes•Heating indicator light•Adjustable temperature•Heat supplied from back of unit to eliminate overheating samplesClick Here to View Product Video INCLUDED: The Boekel Scientific 260700 Microplate Incubator, 115V includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty