Julabo CF31 Cryo-Compact Refrigerated Circulator, 115V/60Hz (NRTL Certified)

Anglia Scientific Cryotome Model 0600 Cryostat This was removed from a university lab where it was  (more)surplus to requirements. The unit powers up and is in working order. It is in reasonable cosmetic condition with minor marks. (digital thermometer not included). Model- 0600S/N- 9002459

This Leica CM 1850 UV Cryostat Model - CM1850UV-1-1 was removed from a university lab where it  (more)was surplus to requirements. The unit became misaligned when a side panel acting as a support came loose during routine maintenance. For this reason it is sold for spares/repairs. It was working up until this panel came loose. Due to this, it is sold for spares/repairs. The unit could still be put back together or used for parts with the correct machinery available.

MVE CryoShipper 8.5 ltr with ShipsLog 3 Temperature data logger Lab This item was removed from a uni (more)versity where it was surplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. Neck Opening in (mm): 8.50 (216.0)Overall Height in (mm): 21.5 (546)Outside Diameter in (mm): 14.50 (369) Also includes the following: ShipsLog 3 Temperature data logger.

This Oxford Instruments OptistatDN Nitrogen Bath Cryostats from a university laboratory where it was (more) surplus to requirements. It is in good cosmetic condition, but due to the nature of the item we are unable to test it.

Julabo CF30 Cryo-Compact Refrigerated Circulator, 115V/60Hz Working Temperature Range -30°C to 150° (more)C Cooling Capacity 320W at 20°C Refrigerant R134a Features - Ergonomic design and easy operation - Small overall dimensions for lowest space requirement - Splash-proof keypad - Large, bright LED temperature display - Precise PID temperature control - RS232 interface for PC connection - Adjustable high temperature cut-off - Classification 3 according to DIN12876-1 - Pump connections for external temperature applications - Bath opening for temperature control of small objects in the bath - Front drain The CF Cryo-Compact refrigerated/heating circulators have a very small footprint which is ideal for placing on a benchtop or in a fume hood with limited space. Models feature M16x1 male pump connections for external temperature applications with 8 and 12 mm hose barbs. The Economy CF30/CF40 models are ideal for routine applications with a working temperature range from -30(-40) to +150°C with a pressure pump. Units feature a splash-proof keypad with LED temperature display, PID temperature control and RS232 interface for PC connection. INCLUDED: The Julabo CF30 Cryo-Compact Refrigerated Circulator, 115V/60Hz includes: - 2 Each Barbed Fitting for Tubing 8 and 12 mm Inner Dia. (Pump Connections M16x1 Male) - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Digital temperture control and selectable display of set and actual temperature PT100 sensor Timer 1 (more) to 99 min with audible alarm Overheating protection (even when bath is empty) Capacity: 16L Outer dimensions(w x d x h): 331mm x 396mm x 265mm Bath dimensions(w x d x h): 290mm × 300mm × 190mm Weight: 10kg Including rack with 36 spaces

Dimensions: 1200 x 400 x 920 mm

VACUUBRAND VACUU-Select, VACUU-VIEW, VSP 3000, and KF DN 16 Package for Fine Vacuum Control Upper Me (more)asuring Limit 825 torr Lower Measuring Limit 1 x 10-3 torr Accuracy +/- 15% of indicated value in the range 0.01-5 mbar/hPa/torr Features - Complete package for vacuum control of all fine vacuum applications in chemical labs, with continuous control range from atmosphere to fine vacuum (10-3 mbar) - Application editor allows easy customization - Graphic user interface for simple operation - Predefined applications for quick, reproducible results and application editor for easy customization - Rugged VACUU·VIEW extended gauge with wide measuring range offers superior chemical resistance and mechanical robustness The VACUU·SELECT fine vacuum control packages provide an easy-to-use vacuum control option for work down to 10-3 mbar. These packages include the VACUU·SELECT controller with fine vacuum gauge, a chemical-resistant inline isolation valve (VV-B 15C), and the accessories required for connection to your vacuum system via small flange (KF) connections. VACUUBRAND offers fine vacuum control packages with two different small flange connections. The KF DN 16 fine vacuum control package is compatible with our rotary vane pump models RE / RZ 2.5 to RE / RZ 6 and our HYBRID pump RC 6. The KF DN 25 fine vacuum control package is configured for use with our RE / RZ 9 rotary vane pumps and VACUU·PURE screw pumps. With its intuitive, application-based user interface, the controller allows you to quickly get your fine vacuum process under control. For advanced processes, pre-defined applications can be modified, and new applications can be created to optimize your process conditions. The included inline solenoid valve and sensor are automatically configured via the proprietary VACUU·BUS system.INCLUDED: The VACUUBRAND VACUU-Select, VACUU-VIEW, VSP 3000, and KF DN 16 Package for Fine Vacuum Control includes: - Vacuum controller VACUU·SELECT (without internal vacuum sensor and venting valve) with with VACUU·VIEW extended and power supply - Solenoid valve VV-B 15C KF DN 16 - T-piece KF DN 16 - Hose nozzle DN 10 mm (PP) - Clamping and sealing rings - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Memmert UN55PA Natural Convection Paraffin Oven 53L, 115V Setting Temperature Range +20°C to +80°C (more) Setting Temperature Accuracy 0.1 °C Chamber Volume 53 L (1.9 cu. ft.) Features - 53 L (1.9 cu. ft.) internal volume with ample capacity - Temperature range from +20°C to +80°C with natural convection - High accuracy with 0.1 °C temperature setting resolution - Equipped with two Pt100 sensors for precise monitoring and fault tolerance - TwinDISPLAY with adaptive PID-microprocessor control and dual TFT displays - AutoSAFETY with integrated over- and undertemperature monitoring and alarms - Fully insulated stainless steel door with 2-point locking system - AtmoCONTROL software for programming via USB or Ethernet interface The Memmert UN55PA Natural Convection Paraffin Oven 53L, 115V, offers a spacious 53-liter (1.9 cu. ft.) chamber ideal for precise paraffin applications and reliable temperature control. Operating within a temperature range of +20°C to +80°C, this oven features natural convection to provide even heat distribution without the need for forced airflow. Its highly accurate 0.1°C temperature setting resolution is maintained by dual Pt100 sensors, ensuring consistent performance with integrated fault tolerance for added security. The adaptive PID-microprocessor controller with TwinDISPLAY and dual high-definition TFT displays allows for intuitive control, precise adjustments, and continuous performance monitoring. This oven is equipped with advanced safety features, including the AutoSAFETY system, which offers automatic over- and undertemperature protection with visual and acoustic alarms to prevent overheating. The robust stainless steel interior is easy to clean and reinforced for durability, while the fully insulated stainless steel door with a 2-point locking system ensures an airtight seal. For ease of programming and monitoring, the AtmoCONTROL software is included, allowing users to manage settings and transfer programs via USB or Ethernet. The UN55PA is built for efficiency, reliability, and the highest standards of paraffin application. INCLUDED: TheMemmert UN55PA Natural Convection Paraffin Oven 53L, 115V includes: - 1 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

If you buy a WPY Multifunctional Scale by July 31, 2024, you will receive each of these products alo (more)ng with a FREE lifetime license for the Workflow Module. Multifunctional scales WPY series is designed for fast and precise determining mass of weighed objects in industrial conditions and with application of a modern terminal PUE7 series. Application The device features simple structure and enables maximum automation of carried out weighing processes. Apart from standard weighing mode, the WPY series additionally allows for parts counting, labelling and formula making processes. The universal software implemented in the terminal enables scales cooperation with barcode scanners, receipt printers, label printers, RFID scanners and PC peripherals (including mouse, keyboard and external data storage devices) all connectable to built-in interfaces RS232, USB and Ethernet. The multifunctional WPY scales if connected to a label printer enables printing labels for matching goods weighed in industrial conditions. The labelling system based on the labelling scales WPY series is dedicated to printing labels for matching weighed products in a packaging process. The multifunctional WPY scales if connected to a label printer enables printing labels for matching goods weighed in industrial conditions. The labelling system based on the labelling scales WPY series is dedicated to printing labels for matching weighed products in a packaging process. Design and functionality The WPY series features a stainless steel weighing platform and a terminal comprising both, 5,7” TFT colourful touch screen display and a membrane keyboard. The system is ready to connect an additional weighing platform, and provides below functions: programming of display and functional keys, programming of infrared proximity sensors, designing printouts, designing text data that is displayed on terminal display. The Workflow Module will improve work in your company. It enables developing a path of customized weighing process adapted to individual requirements of a particular production system, and next sending it to all weighing instruments cooperating with the E2R. The given process is started on the weighing instrument upon operator logging or after selecting a product, a formulation or an ingredient to which it is assigned. Modifications are made with use of convenient and intuitive interface. Software functionality: available working modes: weighing, parts counting, percent setup, formulation, density determination, animal weighing; generating standard labels for matching single goods; generating C labels for matching cumulative containers; generating CC labels for matching containers with cumulative containers; three means of triggering a C and CC label printout: - manually, - by counter status, - by set mass value of a product; control scales mode (+/- control of measurement result); product identification using EAN-13 and EAN-128 codes; access to databases of operators, products, raw materials, clients, weighing records, universal variables and tares. The multifunctional WPY series enables quick searching of a product by means of a connected barcode scanner. This option considerably increases functionality of the system. The terminal enables cooperation with a computer software "LABEL EDITOR", and the software communicates with the scales either through RS 232 interface or through ETHERNET. Scale WPY series is available in dual range (non-verified) version on surchage. Dual and single range scales in non-verified version are named as: scale model/NL, e.g. WPY 150/C2/R/NL.