CONSARCTIC ABV48 Liquid Nitrogen Storage Vessel

Oxford CryoJet Controller This item was removed from a university lab where it was surplus to requi (more)rement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Statebourne Crogenics Biostor 5 Liquid Nitrogen Dewar This was removed from a university lab where i (more)t was surplus to requirements. The unit is in good cosmetic condition but has not been tested. Internal Dimensions are: D 70cm x W 40cm. It has 5 storage containers each with 9 draws & 1 storage container with 7 draws.

This Helix CTI-Cryogenics Compressor Model: SCW Part no: 8032211 was removed from a univer (more)sity lab where it was surplus to requirements. The item is in reasonable cosmetic condition but the front vent/panel is bent in one corner, preventing it from being secured. There are scratches and other marks along the surface and edges. The unit does not power up and is sold for spares/repairs. The absorber was last changed March 1997 Weight & dimensions are as follows:L 52cm x W 50cm x H 42cm75kg

NesLab CryoBath CB-60 Refrigerated Water Bath Chiller This was removed from a university lab where  (more)it was surplus to requirements. The unit powers up and is in good working order. It is in good cosmetic condition with minor marks.

This item has just arrived in our stock. Please enquire for further details.

Eppendorf F-45-18-17 Fixed Angle Cryo Rotor Eppendorf F-45-18-17 Fixed Angle Cryo Rotor, new in box (more). Cat. # 022639480. This rotor accommodates 18 x 1-2ml cryo tubes. The Eppendorf F-45-18-17 Fixed Angle Cryo Rotor is for use in the Eppendorf 5702 Centrifuge. INCLUDED: The Eppendorf F-45-18-17 Cryo Fixed Angle Rotor includes: - Full 1 Year Parts and Labor Warranty Eppendorf F-45-18-17 Fixed Angle Cryo Rotor SpecificationsMax Speed4,400 RPMMax RCF3,000 x gCapacity18 x 1.0/2.0 CryoTubes

Kendro Revco Ultra Low Temperature Freezer ULT1386-3-V39 This was removed from a university lab wher (more)e it was surplus to requirements. The unit powers up and is working but would not drop below -70˚C in testing which we don't think is cold enough to consider this s a fully working unit. It is sold for Spares/repairs

Benchmark Analog Hotplate Magnetic Stirrer Benchmark hotplate stirrers feature an exceptionally dura (more)ble, chemical resistant white ceramic work surface. Their space-efficient design (8 x 9 in. footprint), makes them ideal for use on crowded benchtops and inside of bio-hoods. Advanced microprocessor controls with convenient turn knobs allow quick, precise adjustment and maintenance of speed and temperature. Safety indicator LED’s on the front panel indicate when the heating and stirring functions have been activated. With a square 7.1 in work surface, this hotplate stirrer is compatible with a wide variety of popular sizes of borosilicate glass beakers, flasks, bottles and other vessels. This unit comes complete with a support rod for mounting thermometers and temperature probes. INCLUDED: The Benchmark Analog Hotplate Magnetic Stirrer includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Ohaus PX6202 Pioneer Analytical Balance The Pioneer PX is a precision weighing tool tailored for la (more)boratory, industrial, and educational settings. It supports diverse applications from basic weighing to density determination. The instrument features a backlit LCD complemented by a secondary dot matrix line for detailed data visualization. With integrated RS232 and USB interfaces, it ensures efficient data communication, including GLP/GMP outputs synchronized with a real-time clock. Constructed with a durable metal base and removable stainless steel pan, the PX incorporates adjustable features such as environmental filters, auto-tare, and customizable calibration points. Safety indicators and multilingual options further enhance its professional utility.INCLUDED: The Ohaus PX6202 Pioneer Analytical Balance includes: - Power Cord - Two Year Manufacturer's Warranty

TECHNE MCS-102L 2-position magnetic laboratory stirrer New equipment in its original packaging Refer (more)ence: MCS-102L This magnetic stirrer is designed for optimal cell culture in suspension and the use of microcarriers. The MCS-102L accommodates 2 1 liter culture flasks Speed ​​range from 0 to 80 rpm Soft start and stop for slow acceleration and deceleration Interval setting option Stainless steel shaking platform with markings for culture flasks Designed to operate in an incubator up to 40°C and 95% relative humidity Type: magnetic, rotating Display: analog Applications: biological samples Rotation speed: Max: 80 rpm (503 rad.min-1) Min: 0 rpm (0 rad.min-1) Temperature range: 40°C (104°F)

Stainless Steel HRP EX.H Platform Wherever high readability and precision are important. Wherever go (more)od repeatability in harsh industrial conditions matters. Stainless Steel HRP EX.H Platforms are the ideal solution for any type of industry. Repeatability that cannot be repeated by others Stainless Steel HRP EX.H Platforms have a built-in internal adjustment system. Automatic internal adjustment guarantees the best quality of work and repeatability of results. You save time and avoid the inconvenience of manual adjustment. Hazardous areas are their natural environment Stainless Steel HRP EX.H Platforms have been developed in accordance with Directive 2014/34/EU and the IECEx scheme and, depending on their design, can operate in environments containing explosive gases or dust, classified as zones: 2 and 22. We have equipped them with an intrinsically safe RS 485 communication interface, which allows the platform to work with the PUE HX5.EX weighing meter. To power the platforms, we have dedicated intrinsically safe PM02.EX-1-2 or PM02.EX-2-2 power supplies. Use the potential Stainless Steel HRP EX.H Platforms work with the PUE HX5.EX weighing terminal and are compatible with RADWAG receipt printers. In addition, you will match them with appropriate antivibration tables from our offer, and thus increase the readability of your measurements. The use of stainless steel for the construction of the pan guarantees you a long life of the platform. Fearless of its contact with moist objects or accidental splashing.

Precision of WLC balances Fast, accurate and repeatable weight determination. Energy-efficient elect (more)ronics and display, combined with an internal rechargeable battery, are the perfect duo to allow you to work without access to mains power. Precision not just in the name When we designed this balance, we took care of the smallest details – both those you can’t see, hidden in the solid housing, and those you can touch. This balance is the result of a combination of our experience and true precision. The power of steel The use of stainless steel for the pan guarantees you a long life for the balance. It is not afraid of contact with moist objects or accidental splashes. It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Internal power The internal rechargeable battery combined with the energy-saving display and electronics allow many hours of operation without mains power. Time counts The balance is equipped with a real-time clock that provides accurate time measurement in a way that is independent of external power supply. There is potential Printer, computer, flash drive or additional display – you can easily connect them thanks to the fact that the balance is equipped with interface RS232. You can find all accessories in our regular offer. And if you have questions about compatibility, our experts will help you. Good ALIBI The ALIBI memory used in the terminal allows for safe storage of weighing records without the possibility of unauthorized interference. A single measurement remains in the ALIBI memory up to a preset limit number of days of storage, counting from the date it was taken. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring.