Chiller Variocool VC 10000 LAUDA

Heidolph Hei-CHILL 350 Chiller 115VFeatures - Designed for reliable continuous operation in the labo (more)ratory - Automatic start and shut down feature - Temperature range of -10°C to 40°C - Temperature stability of ± 0.5K - Maximum flow rate of 9L/min for models 600W and under, and 20L/min for models over 600W - Viewing window for thermal fluid level Clearly arranged control elements, with a large LED display, membrane keypad, and liquid level indicators Ventilation grille is held in place with magnets, allowing for very easy access for cleaning the air filter All Hei-CHILL models feature an RS 232 interface and alarm output for external communications The Hei-CHILL models with cooling capacities from 250 to 1,200 W are specifically designed for reliable continuous operation in the laboratory. The magnetic coupling of the pump and the electric motor prevents leakages. The large coolant reservoir to compensates for peak performance during the evaporation process. Other features include: clearly arranged control elements, large LED display, membrane keypad and window for monitoring the thermal fluid level. INCLUDED: The Heidolph Hei-CHILL 350 Chiller 115V includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Heidolph Hei-CHILL 600 Chiller 115VFeatures - Designed for reliable continuous operation in the labo (more)ratory - Automatic start and shut down feature - Temperature range of -10°C to 40°C - Temperature stability of ± 0.5K - Maximum flow rate of 9L/min for models 600W and under, and 20L/min for models over 600W - Viewing window for thermal fluid level Clearly arranged control elements, with a large LED display, membrane keypad, and liquid level indicators Ventilation grille is held in place with magnets, allowing for very easy access for cleaning the air filter All Hei-CHILL models feature an RS 232 interface and alarm output for external communications The Hei-CHILL models with cooling capacities from 250 to 1,200 W are specifically designed for reliable continuous operation in the laboratory. The magnetic coupling of the pump and the electric motor prevents leakages. The large coolant reservoir to compensates for peak performance during the evaporation process. Other features include: clearly arranged control elements, large LED display, membrane keypad and window for monitoring the thermal fluid level. INCLUDED: The Heidolph Hei-CHILL 600 Chiller 115V includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Polyscience 3860T56A1C0D Chiller 1.5HP Turbine Pump, Air-Cooled, 230V, 60Hz (-20C to 40C) Refrigeran (more)t R-404A Temperature Range -20° to 40°C Cooling Capacity 5000W @ 20°C Features - High capacity cooling for lasers, electron microscopes, and other laboratory applications - Small footprint conserves floor space - Displays temperature and pressure or flow rate simultaneously - User-adjustable temperature, pressure, and flow rate alarms - Simple operation and low maintenance DuraChill Chillers offer powerful cooling for demanding applications and serve as a cost-effective alternative to tap water cooling systems. Equipped with a microprocessor-based controller, these chillers provide a digital temperature display (in °C or °F), one-touch set point display, and a digital pressure/flow rate display (in PSI, kPa, GPM, LPM) with easy push-button selection. The inclusion of a modulated refrigeration system enhances cooling efficiency and performance, resulting in improved temperature stability and extended compressor life. With its high-capacity cooling capability, the 3860T56A1C0D is ideal for applications involving lasers, electron microscopes, and other laboratory equipment. The system features dual displays, allowing users to conveniently monitor temperature and process pressure or flow rate simultaneously. User-adjustable alarms for temperature, pressure, and flow rate enable precise control and monitoring. Despite its powerful performance, the chiller has a small footprint that conserves floor space and facilitates seamless integration into laboratory setups.INCLUDED: The Polyscience 3860T56A1C0D Chiller 1.5HP Turbine Pump, Air-Cooled, 230V, 60Hz (-20C to 40C) includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Polyscience CA02A1T1-41AA1N Durachill Chiller with Turbine Pump, -10 to 70°C, 700 to 2900W, 120VACFe (more)atures - Large, full-color touchscreen display with intuitive interface and support for five different languages - Compact, portable design takes up less floor space - Cooling at ambient temperatures as high as 30°C - Choice of pumps and compressor size - DynamicFilter™ self-cleaning filter system - Front fill reservoir - Liquid level monitoring to prevent pump failure - Ultraviolet anti-biological light system - User-adjustable temperature, pressure, and flow rate alarms - Heat up to 70°C, without additional options; ideal for applications, such as lasers, that must be brought to a temperature above ambient before operation can begin - External temperature tracking and communications capability (optional) - Cool Command™, WhisperCool® Your browser does not support iframes.*3D model is solely for visualization and may not depict the actual appearance of your product. DuraChill® is preprogrammed to change its own air filter once a month for a two year period and can be adjusted to suit your operating environment. DuraChill Chillers offer a conveniently located front fill reservoir. You no longer have to go to the back of the chiller top open to fill the reservoir. These high-performance chillers utilize Polyscience's exclusive patent-pending Whispercool noise reduction system. Stableand reliable cooling for many common heat removal applications, including laseretching, AA furnaces, ICP, rotary evaporators, vacuum systems, reactionvessels, plasma etching, and condenser cooling. Click Here to View Product Video INCLUDED: The Polyscience CA02A1T1-41AA1N Durachill Chiller , -10°C to 70°C, 850W; 120V is brand-new . Includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - Full 2 Year Parts and Labor Warranty - Two sets of Inlet/Outlet Adapters: ½ inch male NPT x ½ inch hose barb and ½ inch male NPT x 5/8 inch hose barb Polyscience CA02A1P1-41AA1N Durachill Chiller with Turbine Pump, -10 to 70°C, 700 to 2900W, 120VAC Specifications Part NumberCA02A1T1-41AA1NCooling Capacity @ 20°C0.85 kWCooling Capacity @ 10°C0.6 kWCooling Capacity @ 0°C0.4 kWFluid Temperature Range-10 to 70°C / 14 to 158°FTemperature Stability±0.1°CTemperature Display Units°C or °FDisplayable Pressure UnitsPSI or kPaPump Inlet and Outlet½ inch female NPTConnectivityRS-232, USB Serial Port Emulation, USB TMC, Dry Contact On/Off/StatusPump Pressure Range20 to 90 psi / 138 to 689 kPaMaximum Pump Flow Rate3.5 gpm / 13.2 lpmPower Requirements120V, 60Hz, 13.7AShipping Weight169 lbs / 76.7 kgShipping Dimensions33 x 22 x 33 in / 84 x 56 x 84 cmComparison of ModelsSpecificationPolyscience CA02A1P1-41AA1NPolyscience CA02A1T1-41AA1NPolyscience CA03A1P1-41AA1NPolyscience CA03A1T1-41AA1NPolyscience CA05A1P1-41AA1NPolyscience CA05A1T1-41AA1NPolyscience CA10A3P2-41AA1NPolyscience CA10A3T1-41AA1NCooling Capacity @ 20°C (kW)0.85 kW0.85 kW1.4 kW1.4 kW1.74 kW1.74 kW2.9 kW2.9 kWCooling Capacity @ 10°C (kW)0.6 kW0.6 kW0.99 kW0.99 kW1.29 kW1.29 kW1.93 kW1.93 kWCooling Capacity @ 0°C (kW)0.4 kW0.4 kW0.53 kW0.53 kW0.77 kW0.77 kW1.0 kW1.0 kWFluid Temperature Range (°C/°F)-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°FPump Pressure Range (psi/kPa)45 to 100 psi / 310 to 689 kPa20 to 90 psi / 138 to 689 kPa45 to 100 psi / 310 to 689 kPa20 to 90 psi / 138 to 689 kPa45 to 100 psi / 310 to 689 kPa20 to 90 psi / 138 to 689 kPa20 to 100 psi / 138 to 689 kPa20 to 100 psi / 138 to 689 kPaMaximum Pump Flow Rate (gpm/lpm)2.6 gpm / 9.8 lpm3.5 gpm / 13.2 lpm2.6 gpm / 9.8 lpm3.5 gpm / 13.2 lpm2.6 gpm / 9.8 lpm3.5 gpm / 13.2 lpm3.5 gpm / 13.2 lpm3.5 gpm / 13.2 lpmPower Requirements (Voltage/Hz)120V, 60Hz120V, 60Hz120V, 60Hz120V, 60Hz120V, 60Hz120V, 60Hz230V, 60Hz230V, 60Hz.comparison-table tr td:nth-child(3) { background-color: #fffacd; }

Polyscience LM61MX1A110C LM6 Benchtop Chiller with Centrifugal Pump, 120V, 60Hz3D Visualization of t (more)he Polyscience Benchtop ChillerThe rendered image can be freely rotated in a full 360-degree view, allowing you to zoom in, pause, and explore every angle. For enhanced detail, the rendering can also be displayed in full-screen mode. This 3D model is designed exclusively for visualization purposes and may not accurately represent the actual appearance of your product. Your browser does not support iframes. LM-Series and MM-Series Compact Chillers provide cooling power for demanding applications and serve as economical alternatives to tap water cooling systems. They feature a microprocessor-based controller, digital temperature display (C or °F), and simple operation and maintenance. To optimize cooling efficiency and performance, these sophisticated Chillers also feature a modulated refrigeration system. As a result, temperature stability is greatly enhanced and compressor life extended. LM-Series and MM-Series Chillers are equipped with a magnetic drive centrifugal pump. Wetted parts within the recirculation system are brass, copper, stainless steel, EPDM rubber, Alcryn, nylon, PVC, and polyethylene. Features Optimized for performance at low temperatures Ideal for benchtop rotary evaporators Large, easy to read LED display Space-saving design Cooling at ambient temperatures as high as 35C Low flow shutoff and alarm, high and low temperature alarms Simple setup, operation, and maintenance Choice of two different centrifugal pumps Fluid level indicator RS232 communication and external water filter optional INCLUDED: The Polyscience LM61MX1A110C LM6 Benchtop Chiller , -10°C to 30°C, 420W; 120V includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

PEAK Scientific PH600 Precision Hydrogen Generator This was removed from a university lab where it w (more)as surplus to requirements. The unit powers up but we were unable to test it further. It is in good cosmetic condition with marks from use. It is sold for spares/repairs due to the nature of the instrument and that it is untested.

This listing is for a Packer P400-C Impulse Heat Sealer.The unit is in full working condition and is (more) ready for immediate release.The Packer P400-C Impulse Heat Sealer is a versatile and efficient tool for sealing plastic bags and various materials. Here’s a detailed overview of its features:Key Features:Seal Width and Thickness: Capable of sealing materials up to 400mm wide and handling a maximum thickness of 2 x 750 gauge (or 200 microns), making it suitable for a wide range of packaging needs.Compact Dimensions: Measures 580mm x 83mm x 230mm and weighs 6kg, allowing for easy portability and storage without taking up much space.Impulse Heat Operation: Utilizes an impulse heat mechanism that generates heat only when the jaws are closed, providing efficient and quick sealing without overheating.Integrated Timer and Cutter: Equipped with a timer for precise control over sealing time and a cutter for neat cutting of sealed bags, ensuring a professional finish.Versatile Applications: Ideal for use in various environments, including offices, factories, and laboratories, making it a valuable tool for both commercial and personal packaging needs.Applications:The Packer P400-C is perfect for packaging food items, retail products, or any materials that require secure sealing. Whether you're running a small business or managing inventory in a lab, this heat sealer combines convenience with effective performance.

Designed to achieve precise temperature stability and uniformity with an easy-to-use touch screen co (more)ntroller. A 2 block model with broad range of heat blocks and a wide temperature range of ambient +5°C to 130°C, you’re sure to find the dry bath to fit your application demands. The Thermo Scientific Touch Screen Dry Bath/Block Heater includes advanced features such as a timer, programmability with the ability to save up to 10 programs with 5 steps per program, and an optional external temperature sensor (not included) to control the heat setting by a real time sample read out. Temperature Range: Ambient +5°C to 130°C (Ambient at 25°C) Heating Rate: ≤ 20 min (30° to 130°C) No. of Blocks: 2 (28 x 1.5 ml block) Temperature Accuracy: ≤ ± 0.5°C Temperature Uniformity: ≤ ± 1°C Timer: 0 to 99:59 min or continuous Dimensions (LxWxH): 403 x 200 x 100 mm Weight: 3.7 kg

The H315 waterproof scale Made to work in high humidity conditions and even direct contact with wate (more)r. Designed for precision measurements, making it used in situations where weighing readability is crucial. The power of steel The use of stainless steel for the construction guarantees you a long life for the balance. It is not afraid of contact with moist objects or accidental splashes. The robustness and strength of the design of the platform scales makes it possible to weigh large objects, such as pallets of goods. The stable platform is resistant to vibration, which is important when weighing large objects. Not just weighing But also parts counting, percent weighing, animal weighing and peak hold. The power of H315’s working mods. Do you require fast and repeatable weight measurement under difficult conditions? The H315 scale is made for that! It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Inner power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the H315 scale allows many hours of operation without mains power (up to 7 hours). Battery power supply is available at an extra charge. As standard, the scale is equipped with a RS232 cable, to which you can connect most of the accessories from our range.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.

Scale WPY for statistic control WPY/PGC is equipped with modules that put packed products control in (more)to practice. The module is supported by database containing products and operators lists. A control started by the scale is automatically stopped after controlling pre-defined quantity of packages (samples). Number of the packages is fixed by scale program depending on product batch size. Scales are equipped with 5,7" colourful, graphic touch screen display for previewing information concerning currently performed control and its result. Control cycle runs according to the following scheme: operator choice, product choice, control start, acquiring weighing records, automatic control end after certain packages number, control report print. Each carried out control is ended with a final report containing all information that is necessary for prepacked products control report. The report is automatically saved in scale memory and at the same time it can be printed by printer connected to scale. Scale coupling with computer program enables: keeping weighing records from successive weighments in the database, automatic printout of control processes from computer software level, sending user defined codes from scale to computer software; the codes match weighed product (product code, operator code, batch quantity, batch no., control Start/Stop), defining product codes and their descriptions (names) from the level of computer program, therefore user can assign an individual product name suitable for the company's branch. The purpose of the scale is the packaged goods control (PGC), so remember that verification (legalization) is necessary. We recommend ordering a scale with a proper verification (legalization).