Julabo PURA 22 Water Bath, 115V/60Hz (NRTL Certified)

Manufacturer: PFI Systems Model: Fumigation Boiler / Bath Key Facts: - Max Volume 250ml- 230V 50/60H (more)z Items delivered: - Fumigation Boiler The fumigation boiler is in good cosmetic condition and 100% functional tested.

Laboratory water bath 16L FUNKE GERBER WB 436 D New equipment in its original packaging Stainless st (more)eel bain-marie with digital control Box contents: basic device as shown Universal water bath WB 436-D (digital) Digital adjustment of the setpoint PT100 sensor (platinum sensor) Overheating protection (even when container is empty) Stopwatch (1 – 99 minutes) with sound signal generator Technical data: Temperature range: up to 100°C Connection: 230 V / 50 – 60 Hz / 1000 VA Dimensions L × W × H: 396 × 331 × 265 mm Content: approx. 16L Mass: approximately 10 kg Delivered without lid

Digital temperture control and selectable display of set and actual temperature PT100 sensor Timer 1 (more) to 99 min with audible alarm Overheating protection (even when bath is empty) Capacity: 16L Outer dimensions(w x d x h): 331mm x 396mm x 265mm Bath dimensions(w x d x h): 290mm × 300mm × 190mm Weight: 10kg Including rack with 36 spaces

This Thermo Scientific VersaCool Refrigerated Circulating Water Bath was removed from a university l (more)ab where it was surplus to requirements. The unit powers up and is in very good cosmetic condition. It was tested with a digital thermometer (not included). Heating:-Tested with water, the temperature was set to 37˚c, the temperature quickly went up to 38˚c while the thermometer read 37˚c. It was then tested up to the maximum temperature (for water) of 90˚c which it reached after around 10 minutes, thermometer also read 90˚c. It can go higher but we didn't want it to boil. It is rated for 150˚C. Cooling:-Tested with Antifreeze, the temperature was set to -20˚c, it dropped quite quickly to -8˚c but seemed to stop cooling from there, only dropping a further 0.3˚c over the next few hours. The thermometer read -9.6˚c. This is likely due to the concentration of antifreeze used.

Polyscience WBE20A11B 20L Digital Water Bath (Ambient +5 to 99C), 120V, 60Hz3D Visualization of the  (more)Polyscience General Purpose Water BathThe rendered image can be freely rotated in a full 360-degree view, allowing you to zoom in, pause, and explore every angle. For enhanced detail, the rendering can also be displayed in full-screen mode. This 3D model is designed exclusively for visualization purposes and may not accurately represent the actual appearance of your product. Your browser does not support iframes. The Polyscience WBE20A11B 20L Digital Water Bath is designed to handle a wide range of laboratoryprocedures including: incubation, inactivation and agglutination as well asmost pharmaceutical, serological, biomedical and industrial procedures.To ensure optimium temperature uniformity, your Water Bathfeatures an energy efficient, large-area heater and thermostatic control. ItsPID microprocessor control (Proportional Integral Derivative) system providesproportional heat control by anticipating the approach to your set pointtemperature and preventing overshoot. A redundant safety thermostat is standardon all models.Features Displays actual and set point temperature simultaneously Three push-button pre-sets for frequently used temperatures Integrated timer Hinged gable cover Calibration capability Reservoir sizes from 2 to 28 liters Reservoir made of 304 Stainless Steel Reservoir drain (10 liter and larger baths) Primary and automatic safety thermostats Click Here to View Product Video INCLUDED: The Polyscience WBE20A11B 20L Digital Water Bath (Ambient +5 to 99C), 120V, 60Hz includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Julabo PURA 10 Water Bath, 115V/60Hz Working Temperature Range 18°C - 99°C Heating Capacity 1200W V (more)olume 9.5L Features - Ease of use - Bright display - Splash-proof protected mains switch - Built-in dry running protection - No disturbing elements in the bath - Platform included as standard - Integrated timer - Non-slip rubber feet - Ergonomic recessed grips - Integrated drain screw The PURA water baths stand for a straightforward and safe working in the laboratory. The high-quality water baths offer a temperature stability of ± 0.15°C 2). The working temperature range of +18°C to 99.9°C 1) allows a wide range of applications, such as routine laboratory work, temperature applications for samples, incubation, material testing, corrosion testing, temperature control applications of cultures as well as temperature tests of food and beverages and in the dental field. All models (except PURA 4) come with an integrated drain screw for quick and clean draining of the baths. PURA water baths can be used flexibly and can be easily transported through ergonomic side recessed grips. Non-slip rubber feet ensure a firm footing and more safety in the laboratory. The units are splash-proof, feature a (membrane) keypad and temperature display (LED) for ease of use. Operation in °F or °C with integrated timer. There are no disturbing parts inside the bath so that the entire inner surface can be used to safely temperature-control even small sample containers. Click Here to View Product Video INCLUDED: The Julabo PURA 10 Water Bath, 115V/60Hz includes: - Platform - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

F1 class mass standards are exceptional measuring tools that represent the pinnacle of precision in  (more)the field of metrology. Classified as F1 metrology class, they are perfect for advanced applications where every detail of measurement is of paramount importance. F1 class standard: stainless steel wire Nominal value: 1 mg Material: stainless steel Highest Precision and Accuracy F1 class mass standards are characterized by absolute measurement precision and extraordinary accuracy. They are designed to meet the most stringent standards for acceptable deviation from actual weight. Stability under Difficult Conditions An important feature of F1 class mass standards is their ability to maintain measurement stability even under harsh environmental conditions. The standards of this class are resistant to changes in temperature, humidity and other factors that affect the precision of measurements. Calibration in Accordance with International Standards The calibration process for F1-class mass standards is rigorous and in accordance with international standards. This ensures that standards of this class are globally recognized and can be used in different countries. Specialized Construction Materials F1-class standards are often made of materials with unique physical properties. This provides them not only with precision, but also with durability and wear resistance. Applications 1. Industrial Metrology F1 class mass standards are used in metrology laboratories engaged in the testing and maintenance of measurement standards. 2. Scientific Research In scientific research, especially in high-precision fields such as physics and astronomy, F1-class mass standards are a key tool. 3. Aerospace Industry In the precision mass measurements required by the aerospace industry, F1-class standards guarantee reliability and accuracy. 4. Calibration Laboratories In calibration laboratories where uniformity and precision are a priority, F1-class mass standards are the standard of excellence. F1-class mass standards are synonymous with the highest quality and precision in the field of metrology. Their use is crucial where even the slightest deviation from the standard can carry unpleasant consequences. They are tools for advanced applications that contribute to raising standards in the field of mass measurement.

F1 Mass Standard - knob weights without adjustment chamber. Nominal value - 5 kg.

Scale WLY for statistic control Scale WLY is intended to fast and precise determination of mass in l (more)aboratory and industrial conditions. The model line is the response for growing market demands concerning simple operation and maximum automation of the weighing process. The scales enables cooperation with barcode scanner, printer, label printer, RFID readers and standard PC devices (mouse, keyboard, USB storage device). Design and functionality All WLY scales is equipped with stainless weighing pan, TFT 5,7'' colourful touch screen and membrane keyboard. As an option the scale enables connection of an additional weighing platform to the terminal. The following functions are available: programmable proximity sensors, programmable printout templates, programmable text information for scale's operation, printouts. Scale WLY/PGC is equipped with modules that put packaged products control into practice. The module is supported by database containing products and operators lists. A control started by the scale is automatically stopped after controlling pre-defined quantity of packages (samples). Number of the packages is fixed by scales program depending on product batch size. Scales are equipped with 5,7" colourful, graphic touch screen display for previewing information concerning currently performed control and its result. Scale requires two staged verification process. Due to the influence of gravitational acceleration force the scale has to be adjusted on use site. Control cycle runs according to the following scheme: operator choice, product choice, control start, acquiring weighing records, automatic control end after certain packages number, control report print. Each carried out control is ended with a final report containing all information that is necessary for pre-packaged products control report. The report is automatically saved in scale memory and at the same time it can be printed by printer connected to scale. Scale coupling with computer program enables: keeping weighing records from successive weighments in the database, automatic printout of control processes from computer software level, sending user defined codes from scale to computer software; the codes match weighed product (product code, operator code, batch quantity, batch no., control Start/Stop), defining product codes and their descriptions (names) from the level of computer program, therefore user can assign an individual product name suitable for the company's branch. The purpose of the scale is the packaged goods control (PGC), so remember that verification (legalization) is necessary. We recommend ordering a scale with a proper verification (legalization).

Labconco 700801000 FreeZone 8L -50C Complete Freeze Dryer System Features - Patented moisture sensor (more)protects the vacuum pumpby preventing refrigerationor vacuum start-up whenmoisture is detected incollector chamber area. - Vacuum control valvemaintains set point vacuumlevel to speed the freezedrying process. - Lyo-Works OS provides a real time display of collector temperature and vacuum level - Flexible programming and control of optional drying accessories - Optional End-Zone™ end point detection for flask freeze drying - One-touch data logging and display provides information to maximize sample quality and minimize run time - FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run Bundle includes a multiport drying chamber comprised of 304 stainless steel. Drying Chambers provide a means to attach a flask to your freeze dryer or contain samples in bulk. Lyo-Works™ OS provides a real time display of collector temperature, vacuum level and optional End-Zone™ end point detection system, shown on a 5" full color, capacitive touch screen. The included Edwards RV rotary vane pump delivers excellent ultimate vacuum pressure, high pumping speeds and superior vapour handling capabilities with quiet operation. The Labconco 700801000 FreeZone 8L -50C Complete Freeze Dryer System includes the Labconco 700801000 FreeZone 8L -50C Console Freeze Dryer with stainless steel coil and collector, Labconco 7522800 12-Port Drying chamber, and an Edwards RV8 Vacuum Pump. The Labconco 700801000 FreeZone 8L -50C Complete Freeze Dryer with stainless steel coil and collector is designed for lyophilizing moderate to large sample loads or numerous small container batches. The console features a front viewing window, interior space for a vacuum pump, and accommodation for a large tray dryer such as the FreeZone Stoppering Tray Dryers (pump and tray dryer sold separately). These models offer the broadest range of built-in options including a shell freezer. The upright stainless steel collector coil holds 6 liters of ice before defrosting. A single 3/4 hp HCFC/CFC-free refrigeration system cools the collector to -50° C (-58F), suitable for aqueous samples. The Labconco 7522800 12-Port Drying chamber includes 12 neoprene valves with plastic knobs that accommodate both 1/2" and 3/4" adapters for connection of flasks, a 1/2" thick arcylic lid with neoprene gasket, and one latching pin. Made of type 304 stainless steel. It is compatible with FreeZone 1, 2.5, 4.5, 6, 8, 12 or 18 Liter Freeze Dryers. Drying Chambers provide a means to attach flasks to your freeze dryer or contain samples in bulk. The Edwards RV8 rotary vane pump delivers excellent ultimate vacuum pressure, high pumping speeds and superior vapour handling capabilities with quiet operation. INCLUDED: The Labconco FreeZone 8L -50C Complete Freeze Dryer System includes: - Labconco 700801000 FreeZone 8L -50C Complete Freeze Dryer with Stainless Steel Coil and Collector - Labconco 7522800 12-Port Drying chamber - Edwards RV8 Vacuum Pump - All Vacuum Tubing - EMF20 Mist Filter - Pump Oil - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty