IKA HB Digital Heating Bath

Water bath from 25°C to 100°C for the laboratory The ring baths for columns, Erlenmeyer flasks or be (more)akers are suitable for continuous operation, even unattended, thanks to the standard level and lack of water monitoring. LAUDA Hydro ring water baths are available in five models, all featuring a removable perforated lid with a set of heat-resistant plastic rings. - Operations in a temperature range from 25 to 100°C. - Models H 11 V, H 19 V have been specially designed for safe use in fume cupboards. - The housings are made of stainless steel to allow their use even with chemically aggressive fluids. - Temperature regulation by knob with graduated scale - Lid with set of rings for opening the modular tank - Water level and lack control, for continuous unattended operations - The support rods (length 600 mm, diameter 12 mm), made of stainless steel, are included as standard - Hydro is protected against dry running by an electro-mechanical valve. In case of low water, the heating is stopped In the photo, simple control panel, with knob, graduated scale, warning light and safety valve. Ring opening, to adapt to different types of glassware. Standard water level regulator for continuous operation, even unattended. Safety system in case of water shortage LAUDA evaporization baths are protected against dry running by a cut-off device for lack of water (thermostatic overvoltage). The nut located on the control panel will be used to disarm the security system. Water level regulator as standard Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

Refrigeration bath KB 18-40 FRYKA Main features: - Refrigeration unit: silent, fully hermetic, seale (more)d, air cooled, low maintenance - Parts of the casing made of stainless steel - Easy to clean: Interior without frames, rounded corners - No electronic controls exposed to vapors - Ram protection ring - Four mounting clamps (M8 threads) at the corners of the tub for attaching support rods - Bathtubs in 18/10 stainless steel

Lauda Eco Gold with Lauda Eco RE 420 Water Bath This was removed from a university lab where it was  (more)surplus to requirements. The unit powers up and is in full working order (Thermometer used for testing, not included). It is in good cosmetic condition with minor marks.

Julabo SW23 Shaking Water Bath 115V/60Hz Working Temperature Range 20°C to 99°C Shaking Speed Range (more) 20 to 200 RPM Volume 20L Features - Microprocessor technology with PID temperature control - Bright Multi-Display (LED) - Seamless, splash-proof keypad - Splash-proof mains switch - Electronic timer for setting the running time (0:01 to 9:59 h:min) - On-line communication via built-in RS232 interface - Early warning system with high and low temperature limits - Drain screw for conveniently emptying the bath - Dry-running protection / safety temperature fixed at 105 °C - Wide range of accessories including lift-up Makrolon bath cover available - EasyTemp control software is available free of charge - Removable shaking carriage - Shaking frequency adjustable from 20 to 200 rpm - Shaking frequency indicated on Multi-Display (LED) - Shaking stroke 15 mm - With integrated circulation pump The JULABO SW shaking water baths provide for unsupervised sample incubation. Stainless steel construction with an operating range from +20°C to +99.9°C. User-friendly operation via keypad with bright LED display. Electronic timer from 1 min to 9h 59min. Integrated RS232 interface for integration to PC software for control and data logging. Early low water level warning system. Early warning system with high and low temperature limits ensures that samples maintain the proper temperature. A removable shaking carriage for easy sample removal. A wide range of accessories, including bath covers, are available. Shaking frequency adjustable from 20 to 200 rpm. Shaking stroke = 15 mm. SW22 unit with ± 0.2°C stability. SW23 incorporates a water circulation pump for a stability of ± 0.02°C. INCLUDED: The Julabo SW23 Shaking Water Bath 115V/60Hz includes: - Removable Shaking Carriage - Integrated Circulation Pump - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Julabo PURA 10 Water Bath, 115V/60Hz Working Temperature Range 18°C - 99°C Heating Capacity 1200W V (more)olume 9.5L Features - Ease of use - Bright display - Splash-proof protected mains switch - Built-in dry running protection - No disturbing elements in the bath - Platform included as standard - Integrated timer - Non-slip rubber feet - Ergonomic recessed grips - Integrated drain screw The PURA water baths stand for a straightforward and safe working in the laboratory. The high-quality water baths offer a temperature stability of ± 0.15°C 2). The working temperature range of +18°C to 99.9°C 1) allows a wide range of applications, such as routine laboratory work, temperature applications for samples, incubation, material testing, corrosion testing, temperature control applications of cultures as well as temperature tests of food and beverages and in the dental field. All models (except PURA 4) come with an integrated drain screw for quick and clean draining of the baths. PURA water baths can be used flexibly and can be easily transported through ergonomic side recessed grips. Non-slip rubber feet ensure a firm footing and more safety in the laboratory. The units are splash-proof, feature a (membrane) keypad and temperature display (LED) for ease of use. Operation in °F or °C with integrated timer. There are no disturbing parts inside the bath so that the entire inner surface can be used to safely temperature-control even small sample containers. Click Here to View Product Video INCLUDED: The Julabo PURA 10 Water Bath, 115V/60Hz includes: - Platform - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Julabo CORIO C-B13 Open Heating Bath, 115V/50-60Hz (NRTL Certified) Working Temperature Range 20°C  (more)to 100°C Heating Capacity 1000W Volume 13L Features - Models for internal applications - Bright, white, easy to read display - Very quiet - Precise temperature control JULABO CORIO™ Immersion Heating Circulator combinations with transparent or stainless steel bath tanks for routine laboratory tasks. Units include bright LED display and easy operation. A quick connect bath clamp is included.The CORIO™ C immersion circulator provides temperatures to 100 °C for internal bath applications for use with water only.Products include a quick connect clamp for positioning the CORIO™ C on tank rim. Polycarbonate bath tanks have volume graduations in L and Qt. Stainless steel bath tanks include a drain port (except B5).INCLUDED: The Julabo CORIO C-B13 Open Heating Bath, 115V/50-60Hz (NRTL Certified) includes: - Quick Connect Clamp - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

PROFESSIONAL SCALE, SUITABLE FOR DIFFERENT USES Striking the ideal balance of inventive features and (more) simple, functional weighing capabilities, the OHAUS Adventurer Series has all the applications you need for routine weighing and measurement tasks. Featuring a color touchscreen, GLP/GMP compliance features, two USB ports, and more, the Adventurer is the most comprehensive scale in its class. - Color touchscreen, with icons and intuitive guidance - Useful for a wide variety of applications - Structure and construction among the best Ohaus: resistant, large weighing surfaces, space-saving design of the draft shield and protective hood allow use in laboratory, educational and industrial environments. Other standard features and equipment RS232 interface, integrated weigh below hook, protective cover for the entire base structure, removable stainless steel pan, die-cast metal base, safety bracket, front and illuminated level bubble, four feet adjustable, software lockout menu, stability indicator, overload/underload indicators in software, user selectable environmental settings, audible indicator, user selectable brightness level settings, auto dimming, touchscreen calibration, auto tare, operating language user selectable (nine). MODELLI DISPONIBILI LABORATORY INSTRUMENT Dual USB ports. Front USB easily accessible and simplifies data downlaod. On the back of the scale there is a second USB port to be able to connect it to the PC. It will also be possible to upload user settings to USB, saving different profiles and transporting them to other Adventurer scales. Real time clock with GLP/GMP data. This feature keeps accurate time even in the event of a power failure, and the GLP data function has the ability to log sample name, project names, and balance IDs to help meet traceability and compliance requirements. The draft shield doors consist of two glass panels that will take up very little space on your counter. The large side entrance will allow for unobstructed access and easy cleaning, ensuring a safe working environment while minimizing contamination. Applications Weighing, Parts Counting, Percent Weighing, Check Weighing, Dynamic/Animal Weighing, Totalization/Statistics, Formulation, Density Determination, Display Hold Display 4.3' (109 mm) touchscreen display with color VGA graphics resolution and user controlled brightness Operation AC adapter (included) Communication RS232, USB host, USB device (included). Real time clock with GLP/GMP data output. Framework Metal base, ABS top housing, stainless steel pan, glass draft shield with two-piece top-mounted side doors and sliding top door (1 mg models only), illuminated front level bubble, hook for weighing below, safety bar Construction features Selectable environmental filters, auto tare, user selectable pot life calibration points, software lockout and reset menu, user selectable communication settings and print options, user configurable project and user IDs, up to 9 operating languages

Temperature range: Ambient +5°C to 100°C Temperature fluctuation (at 37°C): ± 0.1 K Temperature fluc (more)tuation (at 50°C): ± 0.1 K Temperature uniformity (at 37°C): ± 0.5 K Temperature uniformity (at 50°C): ± 0.9 K Warming up time (to 37°C): 70 min Warming up time (to 50°C): 115 min Recovery time after door was opened for 30 sec (at 37°C): 5 min Recovery time after door was opened for 30 sec (at 50°C): 6 min Maximum load: 70 kg Maximum load per shelf: 30 kg Capacity: 240 L Dimensions (WxHxD): 1035 x 825 x 745 mm Interior dimensions (WxHxD): 800 x 600 x 500 mm Weight: 93 kg

This Beckman Coulter Biomek NXp Laboratory Automation Workstation was removed from a university lab  (more)where it was surplus to requirements. The unit appears to pretty much fully work. We have homed the axis and run a basic set of commands with it. We have a video of this working. The Tiploader appears to be faulty as it is not accepting commands from the PC. We have verified that the cable/air and PC are communicating with the Tiploader, by connecting a known working unit to the PC. The known working unit operated fine which proved the included Tiploader to be faulty. The system comprises of; 1 x Beckman Coulter Biomek NXp Laboratory Automation WorkstationCat no. A31841Unit dimensions - W77 L92 H82cm 1 x IBM ThinkCentre PCMT-M 8143-34UBiomek Software Version 3.3 installed. 1 x IBM ThinkVision MonitorType - 9417-AB1 1 x Jun-Air CompressorModel 6 The item powers on with the compressor running.Cosmetically it is in a good used condition. 1 x Apple Pro Keyboard 1 x Lenovo Mouse Box of Accessories:-Beckman Coulter AccuFrame2 Power AdaptorsVarious cables and parts9 x 96 Well 0.5ml tube plates

Convenient Transportation of Small Mass Standards The mass standards tweezers are tongs/ pliers that (more) will enable you to conveniently and precisely grasp and transport small mass standards. With it, you can easily and quickly place or lay an object (for example, a mass standard) on the pan and remove it from the pan. The tweezers protect the mass standards from finger grease, moisture and other factors that interfere with the measurement. It is indispensable in the daily use of laboratory balances. Tweezers 105 mm Material: carbon fiber for standards up to 50 g What Kind of Tweezers for Mass Standards? TWEEZERS LENGHT APPLICATION Standard 105 mm up to 50 g 160 mm up to 200 g 250 mm up to 500 g 300 mm up to 500 g Made of carbon fiber 105 mm up to 50 g With a carbon fiber tip 105 mm up to 50 g 155 mm up to 200 g 185 mm up to 200 g 200 mm up to 200 g

Hermle 4 x 250ml Swing Out Rotor The Hermle 4 x 250ml Swing Out Rotor is a centrifuge rotor compatib (more)le with Hermle Z366 series centrifuges. It has a maximum speed of 4,500 RPM and can generate a maximum RCF of 3,780 x g. This rotor can hold a capacity of up to 4 x 250ml, making it useful for processing medium-volume samples. The swing-out design of the rotor simplifies loading and unloading samples while ensuring efficient separation of particles into distinct layers. The rotor is made from high-quality materials to ensure its durability and reliability. INCLUDED: The Hermle 4 x 250ml Swing Out Rotor includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty