GFL multi-station water bath

Water bath from 25°C to 100°C for the laboratory The water baths of the LAUDA Hydro series are the i (more)deal tools for any laboratory application, whether biological, medical or biochemical and guarantee a homogeneous temperature distribution without overheating problems. High quality stainless steel and thoughtful design, provide the ideal depth and opening for any application with bathroom volumes from 4 to 41 liters. All water baths offer a temperature range up to 100°C, with a temperature stability of ±0.1K, so that applications even in the boiling range are possible. A TFT color display ensures intuitive operation with temperature display in °C and °F. The 'A' models (Agitation: H 8 A; H 16 A) have a magnetic stir bar liquid circulation system as standard, to improve temperature uniformity. Application examples - Preparation of cellular, biological or medical samples - Microbiological test incubation - Thawing of the samples - Conducting chemical reactions Notable features - Three timer functions for the user - Electric resistance inside the tank - Direct temperature control for fast and precise heating - Visual and acoustic alarm in case of lack of water, low / high temperature and sensor break - Digital and electromechanical safety system - Lid designed to prevent condensation from dripping onto samples - Exhaust valve on all models Standard equipment - Lid and drain tap in heat-insulating double-walled stainless steel Accessories available Water level regulator. Highest quality materials: tank interior, lid, sieve and heating element made of stainless steel. Heat insulating lid in stainless steel, double walled with internal curvature to guide the condensate. Dump valve on all Hydro Lauda models. Simple control panel with large TFT display with extensive information; change settings and navigate quickly and easily. Optical and acoustic alarm for low water level and over/under temperature as well as sensor breakage/short circuit. Optimized space, safety and comfort of use. Connection for water level regulator (available as accessory). Water circulation The circulation system guarantees optimal temperature distribution throughout the tub. It is managed by a magnetic electric motor which transmits the rotation to a PTFE-coated stirrer in the tank. The agitator draws the water towards the center and then distributes it to the rest of the tank. The water circulation is activated via the main switch. Recommended accessories - Water level regulator. The water regulator located on the back of the bain-marie is used to maintain costant the set water level during water loss due to evaporation. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

Lauda Alpha RA 8 Cooling Thermostatic Water Bath This was removed from a university lab where it was (more) surplus to requirements. The unit powers up and is in good working order. (Digital thermometer used for testing not included). It is in good cosmetic condition with minor marks.

MEMMERT WNE 14 laboratory water bath Model: WNE 14 Temperature range: approx. 5 ° C above ambient te (more)mperature to +95 ° C Setting temperature range +10 to +95 °C Display resolution: 0.1 °C Capacity: approx. 14 litres Internal dimensions (WxDxH): 350 x 140 x 290 mm External dimensions (WxDxH): 578 x 347 x 436 mm Mains: 230 V / 50 ... 60 Hz / 1800 W Weight: approx.: 16.0 kg Filling level at least 97 mm Filling level max. 120 mm Timer digital timer 1 min. to 999 hours for: ON (continuous operation) WAIT (delayed start) HOLD or HOLD depending on the target temperature with "hold time guarantee" Tested at 37°C and 70°C Alarm OK

Yamato BM-401 Digital Water Bath 7L, 115V Water Tank Capacity 7L Operating Temperature Range Ambie (more)nt +5-95°C Temperature Accuracy ±1.0°C Features - Digital temperature setting by ▲▼ keys - Protected water tank prevents burns caused by contact - Equipped with a drain - Has a Temp. preset function (preset / select one temp.) - Comes with 1 Year Manufacturer's Warranty

Memmert WTB35 Digital Water Bath 37.5L, 115V Volume 37.5 L Working Temperature Range +5 above ambie (more)nt to +100 °C Setting Accuracy 0.1°C Features - Precise temperature control with a working range from 5°C above ambient up to +100°C ensures consistent results - Highly accurate settings with 0.1°C precision for optimal temperature management - Generous 37.5-liter capacity designed to handle a wide range of applications - Durable, corrosion-resistant stainless steel construction guarantees long-lasting performance - Effortless operation with an intuitive 3.5" color touch screen for quick adjustments - Advanced two-stage safety system prevents overtemperature, protecting your valuable samples - Autodiagnostic system with built-in fault detection keeps your process running smoothly - Easy-to-clean deep-drawn stainless steel tray with central drain minimizes maintenance time The Memmert WTB35 Digital Water Bath 37.5L, 115V is designed for precise and reliable temperature control, ideal for laboratory applications such as the heating of samples, nutrient solutions, and emulsions. With a working temperature range from 5°C above ambient to 100°C and a setting accuracy of 0.1°C, this water bath ensures consistent performance across various tasks. The intuitive 3.5" color touch screen allows for easy operation, while the generous 37.5-liter capacity makes it perfect for handling large volumes. Built with durable stainless steel, both the interior and exterior are corrosion-resistant and easy to clean. The Memmert WTB35 is equipped with a two-stage safety system to prevent overheating, along with a microprocessor-controlled PID system featuring autodiagnostic functions for added peace of mind. Whether you're looking to improve temperature stability or streamline your processes, this water bath offers the precision and reliability needed to support your work. INCLUDED: The Memmert WTB35 Digital Water Bath 37.5L, 115V includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Capacity: 17 L Max temperature: 100°C Max flow rate: 17 L/min Max pump pressure: 300 mbar Dimensions (more) (DxWxH): 457 x 381 x 456 mm Weight: 13.7 kg

Basic incubator for small laboratories. Despite the natural ventilation, the temperature accuracy is (more) +/-0.5°C @37°C. The most important accessories such as the  plexiglass windows o the door and the 3.1 safety class (DIN), the hole for inserting a control sensor and the PID microprocessor are standard!     Inner chamber in aluminum for better heat transport.

Cytiva Xuri Cell Expansion System W25 Lab This system was removed from a university lab where it was (more) surplus to requirement. All units are in good cosmetic condition with the Xuri Cell Expansion System W25 base unit powering on. All units have been powered on using test cables required to connect the Cytiva Xuri Cell Expansion W25 Pump and Cytiva Xuri Cell Expansion W25 CBCU. These are test cables and are not included in the listing. This system comprises the following: Cytiva XuriTM Cell Expansion System W25 base unitCytiva Xuri Cell Expansion W25 PumpCytiva Xuri Cell Expansion W25 CBCU HP EliteDesk PC w/ Dell Monitor & HP Mouse and Keyboard . There is no software installed. Cytiva Filter Heater

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.

Polyscience AP20S150-A11B 20L Stainless Steel Open Bath, Advanced Programmable (Ambient +10 to 150C) (more), 120V, 60HzThe Polyscience AP20S150-A11B 20L Stainless Steel Open Bath is intended for the precise temperature control ofsuitable liquids in a reservoir. Extremely easy to use and maintain, itcombines design innovation with highly intuitive operation to deliverconvenient and versatile liquid temperature control for a wide range ofapplications. Features Time/temperature programming (ten 100-step programs) Intuitive 4.3” (10.9 cm) SmartTouch display 6 languages: French, German, Spanish, Chinese, Arabic, English Variable speed pump with open- and closed-loop external circulation capability Swivel 180™ Rotating Controller On-board connectivity: USB-A & B, Ethernet, RS-232/RS-485, and external temperature probe Event scheduling (time & date) with real-time clock Review temperature trends for up to 10 days Multiple selectable “home” screens On-screen help Automatic and/or user-adjustable performance optimization 5-point calibration capability Click Here to View Product Video INCLUDED: The Polyscience AP20S150-A11B 20L Stainless Steel Open Bath, Advanced Programmable (Ambient +10 to 150C), 120V, 60Hz includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Labconco RapidVapVacuum Evaporation System with RS-232 Link and Lid HeaterThe RapidVapVacuum Evapora (more)tion Systems are ideal for preparation of samples in a variety ofapplications including drug discovery, agrichemistry, mycology testing andenvironmental analysis. The systems use vacuum along with heat and vortexmotion to help speed evaporation and provide an alternative to traditionalcentrifugal evaporation methods. These systems may be used with a broad rangeof aggressive chemicals. Heat is supplied by a dry block heating system that,unlike water baths, adds no potential source of contamination and requires nomaintenance. The RapidVap Vacuum Evaporation Systems accommodate twelve different,interchangeable accessory sample blocks holding sample volumes from just a fewmilliliters to as large as 450 milliliters. As many as 110 each 12 or 13 mmtubes may be loaded at once. Additional blocks accommodate various tube typesincluding conical centrifuge tubes and scintillation vials. Contact Labconcoabout custom blocks to fit special glassware configurations such as VOA vials.INCLUDED: The Labconco 7900012 RapidVapVacuum Evaporation System with RS-232 Link and Lid Heater, 115V, 50/60Hz includes: - Vacuum Hose - Clamps x 2 - Heat Transfer Grease - RS232 Cable Assembly - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty