Boekel 14458 Round Water Bath

Yamato REV-202M Rotary Evaporator with Vacuum Regulator, Water Bath, and Selectable Glassware, 115V  (more)Speed Range 5 to 315 RPM Evaporation Capacity Up to 23 ml/min Pressure Setting Range 0 to 1013 hPa Features - Rotate faster & slower (315 RPM – 5 RPM) than any other rotary evaporator on the market to test new SOPs and develop better methods - Unit is easy to disassemble and clean after use - Program rotation direction changes, ramps, and other automations to get more done in the lab at once - Automatic on/off and suction speed adjustment via wireless vacuum controller - Easily analyze the residue left over after distillation - Orient for left or right-handed operation based on your limited bench space Standard rotary evaporator designed with vacuum controller and a slide jack mechanism for convenient height adjustment. Set includes the VR102S Vacuum Controller, BM302-A Water Bath, and your choice of glassware. Market leader in rotation speed range at 5 to 315 RPM. Designed with set inversion function where glassware and bath can be set on either side, left or right, depending on user’s dominant hand and installation location. Standard equipped with condenser insulation kit to suppress condensation on the condenser’s surface. INCLUDED: The Yamato REV-202M Rotary Evaporator with Vacuum Regulator, Water Bath, and Selectable Glassware, 115V includes: - Glassware Set Selected Above - VR102S Vacuum Regulator - BM302-A Water Bath - Rotary Joint - 1L Evaporation Flask - 1L Receiving Flask - Ball Joint Clamp - Flask Clip - Vacuum Seal - Condenser Insulation Kit - Condenser Bracket (Only for Glassware Sets B & C) - Hex Wrench - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Julabo PURA 14 Water Bath, 115V/60Hz Working Temperature Range 18°C - 99°C Heating Capacity 1300W V (more)olume 14L Features - Ease of use - Bright display - Splash-proof protected mains switch - Built-in dry running protection - No disturbing elements in the bath - Platform included as standard - Integrated timer - Non-slip rubber feet - Ergonomic recessed grips - Integrated drain screw The PURA water baths stand for a straightforward and safe working in the laboratory. The high-quality water baths offer a temperature stability of ± 0.15°C 2). The working temperature range of +18°C to 99.9°C 1) allows a wide range of applications, such as routine laboratory work, temperature applications for samples, incubation, material testing, corrosion testing, temperature control applications of cultures as well as temperature tests of food and beverages and in the dental field. All models (except PURA 4) come with an integrated drain screw for quick and clean draining of the baths. PURA water baths can be used flexibly and can be easily transported through ergonomic side recessed grips. Non-slip rubber feet ensure a firm footing and more safety in the laboratory. The units are splash-proof, feature a (membrane) keypad and temperature display (LED) for ease of use. Operation in °F or °C with integrated timer. There are no disturbing parts inside the bath so that the entire inner surface can be used to safely temperature-control even small sample containers. Click Here to View Product Video INCLUDED: The Julabo PURA 14 Water Bath, 115V/60Hz includes: - Platform - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Julabo PURA 10 Water Bath, 115V/60Hz Working Temperature Range 18°C - 99°C Heating Capacity 1200W V (more)olume 9.5L Features - Ease of use - Bright display - Splash-proof protected mains switch - Built-in dry running protection - No disturbing elements in the bath - Platform included as standard - Integrated timer - Non-slip rubber feet - Ergonomic recessed grips - Integrated drain screw The PURA water baths stand for a straightforward and safe working in the laboratory. The high-quality water baths offer a temperature stability of ± 0.15°C 2). The working temperature range of +18°C to 99.9°C 1) allows a wide range of applications, such as routine laboratory work, temperature applications for samples, incubation, material testing, corrosion testing, temperature control applications of cultures as well as temperature tests of food and beverages and in the dental field. All models (except PURA 4) come with an integrated drain screw for quick and clean draining of the baths. PURA water baths can be used flexibly and can be easily transported through ergonomic side recessed grips. Non-slip rubber feet ensure a firm footing and more safety in the laboratory. The units are splash-proof, feature a (membrane) keypad and temperature display (LED) for ease of use. Operation in °F or °C with integrated timer. There are no disturbing parts inside the bath so that the entire inner surface can be used to safely temperature-control even small sample containers. Click Here to View Product Video INCLUDED: The Julabo PURA 10 Water Bath, 115V/60Hz includes: - Platform - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Maximum temperature: 150°C Temperature stability (at 37°C): ±0.005°C Temperature uniformity (at 37°C (more)): ±0.02°C Heater power: 2 kW Heat up time from 25°C to 70°C: 25 min Maximum pressure pump performance (at zero flow): 310 mbar Maximum flow pump performance (at zero pressure): 17 L/min Tank capacity: 12 L Tank dimensons (DxWxH): 325 x 300 x 150 mm Liquid depth (min/max): 80/140 mm

Equipped with a removable shaking platform. Maximum temperature: 100°C Dimensions (WxDxH): 580 x 440 (more) x 450 mm Internal dimensions (WxDxH): 350 x 290 x 230 mm Shake range: 35 – 160 RPM

Calibration and regulation of temperatures from -25 to 200°C with LAUDA calibration thermostats The  (more)ECO calibration thermostat is designed for the specific needs of laboratories that carry out calibration and regulation work on a daily basis. The equipment was specially developed for the precise calibration of thermometers, such as industrial platinum resistance thermometers, temperature probes, thermocouples or electrical thermometers. Liquid calibration baths are considered the most stable temperature source and offer the greatest consistency for comparative calibration of temperature probes and sensors in a laboratory. LAUDA calibration thermostats are specially equipped for the calibration of glass thermometers or electric thermometers; they are an ideal solution compared to heat cabinets and metal block thermostats, as these thermostats transfer heat into the thermoregulation liquid 40 to 60 times better than through the air. The LAUDA ECO REJ 1225 G calibration thermostat is ideal for calibrating glass thermometers or electric thermometers. DISPLAY AND CONTROL The thermostat can be easily and flexibly integrated into your existing work processes thanks to a variety of interfaces, including Profibus, Ethernet or Pt100/LiBus. The large color TFT display offers a clear overview at a glance and allows you to program a variety of temperature curves, which are automatically processed by the thermostat to support your daily laboratory work. - Color TFT display for simultaneous indication of actual and set values ​​and temperature profile graph - Intuitive menu navigation in simple language - Simple entry via cursor and function keys. Additional Tmax button for overtemperature protection - Fully electronic stepless controller with PID action - USB interface as standard - Upgradeable with Pt 100/LiBus module for external control and remote control via command console - Programmer with 150 temperature/time segments separable into 5 programs CONSTRUCTION AND BATH - Thermostatic calibration bath with the latest microprocessor technology and integrated cooling system - Safety class III for operation with flammable and non-flammable liquids. - Too high temperature protection adjustable via menu - Pump with six adjustable power levels - Easy flow control between internal and external circulation - 2 separate chamber design for a constant level in the thermostating chamber - Vertical adjustment for calibration chamber overflow - Stainless steel bath with drain valve Why LAUDA thermostats? Calibration applications require thermostats that maintain a constant, temperature-independent liquid level. To achieve this, LAUDA uses a two-chamber tank, the temperature chamber and the operation chamber, also known as the usable space or buffer chamber. A unit pumps fluid from the heat chamber to the application chamber where, if it is overfilled, it has the potential to overflow back into the heat chamber. The cylindrical working chamber is height adjustable, which makes it possible to adjust the immersion height. The thermometers, completely immersed, can therefore be read directly at the point of immersion. Furthermore, the separate calibration chamber ensures constant immersion depth, regardless of liquid volume expansion, excellent temperature stability of ±0.02 K and homogeneous temperature distribution. Standard accessories - 2 screw caps, 2 closing caps - 1 bath cover Performance graph of the pressure pump on the six levels. GREEN TECHNOLOGY The LAUDA ECO calibration thermostat uses refrigerants compliant with the European regulation on fluorinated gases. Furthermore, the REJ 1225 G is optionally available with natural refrigerants.

Branson Disruptor horn – 1/2” dia. Stepped, tapped Disruptor horn, 1/2″ diameter, stepped, tapped,  (more)for processing sample volumes of 10 – 250 ml; used with Branson SFX250, SFX550, S250A, and S450AINCLUDED: The Branson Disruptor horn – 1/2” dia. Stepped, tapped includes: - Manufacturer's Documentation Request a Formal Quote

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW