Tecan Microplate Power Washer PW 384 96 Well Cell-based and ELISA Mikroplatten

The Gilson Aspec XL optimizes recovery and precision, ensures accurate and precise sample preparatio (more)n results. The full range of column dimensions (1, 3, and 6 mL) are accommodated within the layout of the instruments. Graphically designed, drag-and-drop software makes method development and sample-processing simple-in addition to facilitating 21 CFR Part 11 compliance and other electronic record management regulations.

This Packard Multiprobe ll EX Robotic Liquid Handler was removed from a university lab where it was  (more)surplus to requirements. This item is in good cosmetic condition and powers up, unable to test further at our facility. When tested with a PC, this item did not communicate successfully, therefore it is listed as Spares or Repairs. The item is supplied with 2 x Packard Bioscience LTD Vacuum Bottle.

Perkin Elmer Chemagic 360 DNA Extractor Magnetic Separator System This system was removed from a uni (more)versity where it was surplus to requirement. It is in good cosmetic condition and powers on. We tested the system with a security key taken from another Chemagic we had in stock, although the system booted up it displayed a 'Door Open' error that prevented the system from initializing.Due to this, this system is listed as Spares/Repair. Security Key not included. This system also includes the following: - Chemagic 96-rod head - Instruction manual - Touch-screen monitor - 5 x 96 well microplates/holders - 1 x Newland wired scanners with stand - table

Perkin Elmer Janus G3 Standard Varispan Deck Liquid Handler This item was removed from a university  (more)laboratory where it was surplus to requirements. It powers up when switched on and is in good used cosmetic condition. Further testing has not been conducted, but we were informed they were in working condition prior to removal. Includes a deck plate for 24 microplates. WinPrep software is available for setup with a PC upon customer request. Specifications.- Model: Janus G3 - Serial No.: JA2049N3797

Manufacturer: YMC Model: YMC Hydrosphere C18 Part Number: HS12S03-1004QT S/N: 0410010197 Features: + (more) Based on highly inert, ultra pure, pH neutral silica+ "Hydrophilic" C18 surface for enhanced polar selectivity+ Extremely rigorous physical and chemical specification+ suitable for conventional reversed phase and highly aqueous application+ Pharmaceutical method development Particle Size (µm): 3 Pore Size (Å): 120 Length (mm): 100 Internal Diameter (mm): 4 Solid Support: Ultra-pure Silica Format: Column Used, good condition - fully functional.

Flat polygonal sheets - set (1 mg - 500 mg) F1 class mass standards are exceptional measuring tools  (more)that represent the pinnacle of precision in the field of metrology. Classified as F1 metrology class, they are perfect for advanced applications where every detail of measurement is of paramount importance. F1 Class Mass Standards – Key Features Highest Precision and Accuracy - F1 class mass standards are characterized by absolute measurement precision and extraordinary accuracy. They are designed to meet the most stringent standards for acceptable deviation from actual weight. Stability under Difficult Conditions - An important feature of F1 class mass standards is their ability to maintain measurement stability even under harsh environmental conditions. The standards of this class are resistant to changes in temperature, humidity and other factors that affect the precision of measurements. Calibration in Accordance with International Standards - The calibration process for F1-class mass standards is rigorous and in accordance with international standards. This ensures that standards of this class are globally recognized and can be used in different countries. Specialized Construction Materials - F1-class standards are often made of materials with unique physical properties. This provides them not only with precision, but also with durability and wear resistance. The set includes: wooden box 12 mass standards 1 pair of tweezers 1 brush Material: nickel silver *The 1 mg, 2 mg and 5 mg mass standards are made of aluminum. Application 1. Industrial Metrology F1 class mass standards are used in metrology laboratories engaged in the testing and maintenance of measurement standards. 2. Scientific Research In scientific research, especially in high-precision fields such as physics and astronomy, F1-class mass standards are a key tool. 3. Aerospace Industry In the precision mass measurements required by the aerospace industry, F1-class standards guarantee reliability and accuracy. 4. Calibration Laboratories In calibration laboratories where uniformity and precision are a priority, F1-class mass standards are the standard of excellence. F1-class mass standards are synonymous with the highest quality and precision in the field of metrology. Their use is crucial where even the slightest deviation from the standard can carry unpleasant consequences. They are tools for advanced applications that contribute to raising standards in the field of mass measurement.

Labconco SteamScrubber Glassware Washer, undercounter SteamScrubber Glassware Washers have stainless (more) steel top and bottom racks that accommodate basket inserts for a wide variety of beakers and other wide-mouth laboratory glassware. Specialized inserts for BOD bottles, petri dishes, culture tubes and small utensils make the SteamScrubber versatile. It can accommodate Upper and Lower Spindle Racks (for forced air drying see FlaskScrubber washers). Features Achieve higher water temperatures for enhanced washing, faster drying, and sanitizing LCD information center for customizing cycles and monitoring operations, including internal water temperature (C or °F) and alarms High water circulation rates for thorough cleaning: 96 gal./min. (363L/min.) when operated on 115V 60Hz, and 112 gal./min. (424L/min.) on 230V 50/60Hz Dual pumps: one for washing and one for draining, to reduce potential for cross-contamination Built-in purified water pump brings unpressurized or pressurized purified water into tank for up to six pure water rinses Built-in steam generator produces hot vapor to penetrate and remove dried residue for cleaner glassware Manual-fill dispensers for detergent (powder or liquid) or rinse aid solution Two user-set cycle programs User-set delayed start (up to 8 hours) Optional tempered safety glass viewing window with 25w interior light Environmentally Friendly: Item contains environmental attributes or features (e.g. water conserving, lead-free, etc.) as described in the item detail Click Here to View Product Video INCLUDED: The Labconco 401001000 SteamScrubber Glassware Washer, undercounter, 115V, 60Hz includes: - Upper and Lower Standard Racks - Leveling Feet x 4 - Screws x 2 - Hose Clamp - Drain Hose - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Gilson PIPETMAN G Multichannel P8x20G, 2-20 uL Pipette Designed PIPETMAN G brings a new level of com (more)fort into the Gilson range, with a redesigned piston mechanism that reduces the force needed to aspirate and dispense liquids. PIPETMAN G maintains the trusted durability, accuracy, and reliability of the original PIPETMAN pipettes with comfort. Pipetting ComfortPIPETMAN G offers one of the lowest pipetting forces commercially available. With a redesigned piston assembly system and high quality piston grease, PIPETMAN G guarantees hours of comfortable pipetting.Reliable ResultsPIPETMAN G relies on the legendary accuracy, precision, and reliability of PIPETMAN with improved pipetting comfort. Built-to-Last and ConvenientMade of PVDF and stainless steel, the PIPETMAN G offers premium durability. The PIPETMAN G clip ejector allows for convenient access to serviceable parts. CLICK HERE TO SHOW GILSON PIPETTE COMPARISON TABLE INCLUDED: The Gilson PIPETMAN G Multichannel P8x20G, 2-20 uL Pipette includes: - Operator's Guide - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Eppendorf F-45-30-11 Fixed Angle Rotor for 5804/5810 (022637002) Eppendorf F-45-30-11 Fixed Angle Ro (more)tor never used, new in opened box. Capacity of 30 x 1.5/2ml. The F-45-30-11 is used in the Eppendorf 5804, 5804R, 5810, and 5810R Benchtop Centrifuges. INCLUDED: The Eppendorf F-45-30-11 Fixed Angle Rotor for 5804/5810 (022637002) includes: - Full 1 Year Parts and Labor Warranty Eppendorf F-45-30-11 Rotor SpecificationsMax Speed14,000 RPMMax RCF20,800 x gMax Capacity30 x 1.5/2 mL