STEMCELL RoboSep 20000 Automated Magnetic Cell Isolation Year 2010 Standalone

This system was removed from a university lab where it was surplus to requirements. All modules powe (more)r up but have not been tested further. We are told it was working prior to removal. 4 PCs are included, but have had their hard drives removed for GDPR reasons. The PCs have been left with he system as they may contain required Pci cards. It is in good cosmetic condition with minor marks. Sequenom Samsung MassARRAY NanodispenserSN - 31-0142-F2 Bruker Agena BioscienceType - MT AnalyzerSN - BA060636 Sequenom MatrixModel - PlateMate 2X2SN - 301-9-234Comes with Controller - Looks never used as is still sealed2 x Matrix ControlMate Software Discs V1.0.11 Other bits:-APC Back-UPS R S 1000 - Powers onSequenom Box of old chips for volume checksGrey Case for Matrix PlateMate Plus/PM 2X2 30ul 96 Pipetting Head (Case is empty)2 x 5000ml Simax Glass BottlesWash Tank with ProbeBDH Black Container2 x Nalgene Waste/Supply Containers40L Feed Tank with Probe40L Waste Tank with ProbeTubingSmall box labelled Gasket kit with 2 x Green Gaskets insidePfeiffer Vacuum Compact Cold Cathode Gauge PTR25500 (Not sure if this is related)Box labelled Sequenom Parts includes:-Shipping bracketPlatesPower cableMassARRAY Nanodispenser Floppy disk SN - B1-0142-F2Various PC cables (VGA etc.)

This Thermo Scientific Matrix Hydra II Automated Liquid Handling System was removed from a universit (more)y lab where it was surplus to requirements. The system is in good cosmetic condition with marks from use. All modules power up. We had a service engineer inspect and test this system after setting up and connecting all the electronic connectors but not the pipes. The 1-channel nanofill mechanism was stuck so they took it apart and lubricated it. It's now working fine and can be controlled by the PC. The matrix stage is working fine and can be controlled by the PC but the dispenser is not working. The Hydra pump Module: They have changed the two fan guards with better ones and cleaned the fan. Now they are looking better. This module is working fine and communicates with the PC as normal. We can run test protocols but from time to time we got some error messages. I think that because the fact we have not used any liquid and the system sends feedback when the liquid passed through some parts. The system is made up of the following; 1 x Matrix Hydra IICat no. 109610 1 x Matrix 2 Position Stage 1 x Apogent Discoveries Matix Hydro Pump ModuleThe unit powers on with all 3 Fills working. 1 x Matrix P1 Control Box 1 x Innovadyne 1-Channel NanofillThe unit powers up. 1 x Grant Instruments Type MS1The unit powers up. Dell Laptop with Microsoft MouseModel - PP04XHydra II-Plus-One Control Software Version 3.1.3 InstalledThe unit powers up and the software runs. Software Discs:Matrix Hydra II-Plus-One Control Software Version 3.1.3Matrix Hydra II-Plus-One Control Software Version 3.1.2SuperLogics LE Software Suite Rev 2.92 x Socket Installation discs Various tubing and accessoriesOperating instructions

Teledyne Cetac Technologies MVX-7100 µL Workstation This was removed from a university lab where it  (more)was surplus to requirements. The unit powers up and is in good cosmetic condition with minor marks. The lab confirmed it was in full working order. Comes with USB, Ethernet and Coms cables along with its own power supply.

CEM Explorer 96 Microwave Autosampler Model 909960 This was removed from a university lab where it  (more)was surplus to requirements. The unit powers up but has not been tested further. It is in good cosmetic condition with minor marks from use. 5 x Racks hold 12 x 12-15ml tubes3 x Racks hold 6 x 50ml tubes

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

RDP Howden Hydraulic Power Pack (M9/43/W) This item was removed from a university where it was surpl (more)us to requirements. It is in good cosmetic condition. However, we are unable to power it on due to the lack of a compatible power supply. The previous client has indicated that it requires a new pump, but otherwise, it is believed to be in operable condition. Specifications: - Type No.: 119-43-Y - Serial No.: 1426-84

Edwards XDS35i Dry Scroll Pump Ultimate Vacuum 1 x 10-2 mbar Inlet Connection NW40 Displacement 43 m (more)3h-1 / 25 ft3min-1 Features - Scroll pumps provide oil-free pumping, making them an excellent alternative to rotary vane pumps for clean applications - The XDS pumps feature an innovative bearing shield that isolates the vacuum environment from lubricants, ensuring a totally dry operation and protecting bearings from process gases - Adjustable gas ballast enhances vapor handling, allowing the pumps to be used in applications previously unsuitable for scroll pumps - Achieves a peak pumping speed of 35 m³/h (50 or 60 Hz) for rapid and effective operation - Capable of handling a maximum inlet pressure for water vapor of 35 mbar (23 Torr) - Operates at a nominal rotation speed of 1750 rpm for consistent performance - Exceptional leak tightness of <1 x 10⁻⁶ mbar ls⁻¹ for reliable and efficient operation Edwards XDS35i Dry Scroll Pump Scroll pumps are an excellent alternative to rotary vane pumps where oil free pumping is desirable. The XDS pumps in particular use an innovative bearing shield to isolate the vacuum environment from all forms of lubricant not only making them totally dry, but also protecting the bearing from any process gases. Vapour handling is enabled by an adjustable gas ballast; this allows the range of pumps to satisfy many applications that were previously off limits to other scroll pumps. Click Here to View Product Video INCLUDED: The Edwards XDS35i Dry Scroll Pump includes: - Power Cord - Manufacturer's Documentation - Operator's Manual - 1 Year Manufacturer's Warranty

Labconco 700402000 FreeZone 4.5L -50C Complete Freeze Dryer System, PTFE CoatedFeatures - Patented m (more)oisture sensorprotects the vacuum pumpby preventing refrigerationor vacuum start-up whenmoisture is detected incollector chamber area. - Vacuum control valvemaintains set point vacuumlevel to speed the freezedrying process. - Lyo-Works OS provides a real time display of collector temperature and vacuum level - Flexible programming and control of optional drying accessories - Optional End-Zone™ end point detection for flask freeze drying - One-touch data logging and display provides information to maximize sample quality and minimize run time - FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run Bundle includes a multiport drying chamber comprised of PTFE coated 304 stainless steel. Drying Chambers provide a means to attach a flask to your freeze dryer or contain samples in bulk. Lyo-Works™ OS provides a real time display of collector temperature, vacuum level and optional End-Zone™ end point detection system, shown on a 5" full color, capacitive touch screen. The included Edwards RV5 Rotary Vane Pump delivers excellent ultimate vacuum pressure, high pumping speeds and superior vapour handling capabilities with quiet operation. The Labconco 700402000 FreeZone 4.5L -50C Complete Freeze Dryer System, PTFE Coated includes the Labconco 700402000 FreeZone 4.5L -50C Benchtop Freeze Dryer with PTFE coil and collector, Labconco 7522801 12-Port Drying Chamber PTFE-Coated, and an Edwards RV5 Rotary Vane Vacuum Pump. The Labconco 700402000 FreeZone 4.5L -50C Benchtop Freeze Dryer with PTFE Coil and Collector is designed for lyophilizing light to moderate sample loads. The compact design is ideal for labs with limited floor space. The upright PTFE collector coil holds 4.5 liters of ice before defrosting. A single 1/3 hp HCFC/CFC-free refrigeration system cools the collector to -50C (-58F), suitable for aqueous samples. The Labconco 7522801 12-Port Drying chamber includes 12 neoprene valves with plastic knobs that accommodate both 1/2" and 3/4" adapters for connection of flasks, a 1/2" thick arcylic lid with neoprene gasket, and one latching pin. Made of type 304 stainless steel with corrosion-resistant PTFE-coated interior. It is compatible with FreeZone 1, 2.5, 4.5, 6, 8, 12 or 18 Liter Freeze Dryers. Drying Chambers provide a means to attach flasks to your freeze dryer or contain samples in bulk. The Edwards RV5 Rotary Vane Vacuum Pump delivers excellent ultimate vacuum pressure, high pumping speeds and superior vapour handling capabilities with quiet operation. INCLUDED: The Labconco 700402000 FreeZone 4.5L -50C Complete Freeze Dryer System, PTFE Coated includes: - Labconco 700402000 FreeZone 4.5L -50C Benchtop Freeze Dryer with PTFE Coil and Collector - Labconco 7522801 12-Port Drying Chamber, PTFE-Coated - Edwards RV5 Vacuum Pump - All Vacuum Tubing - Mist Filter - Pump Oil - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Yamato DX-602C Natural Convection Oven 153L, 115V Temperature Range Ambient +5°C to 280°C Temperatu (more)re Distribution Accuracy ± 10°C at 280°C Chamber Volume 153L Features - Economical and cost saving - Easy to use and maintain - Excellent temperature accuracy - Digital PID controller for easy operation with options for Fixed setting, Auto Start, Quick Auto Stop and Auto Stop - Increased safety and self-diagnostic functions - Calibration off-set function The Yamato DX-602C Natural Convection Oven 153L, 115V is designed for both economy and efficiency. It features a digital PID controller for straightforward operation, including options like Fixed setting, Auto Start, Quick Auto Stop, and Auto Stop. The oven operates within a temperature range of room temperature +5°C to 280°C, maintaining a temperature control accuracy of ±1°C and distribution accuracy of ±10°C at 280°C. It takes approximately 80 minutes to reach its maximum temperature from room temperature. This oven is built with a durable stainless-steel interior and an electro-galvanized steel sheet exterior finished with melamine resin, ensuring longevity and ease of maintenance. It's insulated with glass wool and utilizes a 1.36 kW iron-chrome wire heater. Equipped with two 33 mm exhaust ports on the top, it offers microprocessor controlled PID temperature management with digital setting and LED display options, alongside a versatile timer range. Safety is a priority, with features including self-diagnostic functions, a key lock, hydraulic overheat prevention, and an electric leakage breaker with overcurrent protection. The internal dimensions are 600x510x500mm, and the external dimensions are 700x640x830mm. The oven can support a shelf plate load of 15kg and features 12 shelf rest steps with a 35mm pitch. The Yamato DX-602C is an ideal solution for those in need of a large, reliable, and user-friendly convection oven for various applications. INCLUDED: The Yamato DX-602C Natural Convection Oven 153L, 115V includes: - 2 x Stainless Steel Punching Metal Shelves w/ Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Dimensions (HxWxD): 900 x 2100 x 850 mm