Agilent G4513-40532 Hi-density turret, used with series 7693 autosampler

Beckman Coulter BioMek NXp Laboratory Automation System Lab This system was removed from a universit (more)y where it was surplus to requirement. It is in good cosmetic condition and powers up. The system includes the following: - Software - PC and monitor - Manual - 40 x boxes of 10 racks of P20 pipette tips - 8 boxes of 10 racks of P250 pipette tips - 1 x Biomek valve Unit - 1 x Inheco TEC Control 96/RS232 - 1 x Biomek Modular Reservoir Quarter Module 40mL Capacity (48 reservoirs) - 1 x Biomek Modular Reservoir Half Module 75mL Capacity (24 reservoirs) - Box of tubing - Box of spare parts and accessories - 1 x light curtain test rod

Beckman Coulter Biomek FXp Laboratory Automation Workstation w/ PC and Software This item was remove (more)d from a university lab where it was surplus to requirements. The system powered on with stable status lights. The previous client stated it was in working order when last used on: 24.05.24. The system comprises: - Beckman Coulter FX Device Controller - Cat No.: 719366 - 3 x Inheco Single TEC Control - Part Nos.: 8900031 - Serial Nos.: 2549, 2564, 2537 - Inheco Thermoshake Plate Shaker & Cooler/Heater - Part No.: 7100146-B - Serial No.: 3080 - Year: 2018 - Thermo Scientific Masterflex P/S Easy-Load ll Pump - Model: 1400-1320 - Serial No.: B13001697 - Pump heads model: 956-0025 - Lenovo ThinkCentre M83 with Windows 7 PRO - Model: S11DOO - Serial No.: MJ03JHRD - Lenovo ThinkVision Monitor - Serial No.: V6-D1101 - Year: 2010 - Lenovo Keyboard and Mouse Software and Manuals Included:- Beckman Coulter install disks - Masterflex P/S 1400 series operating manual - Biomek Tutorials and setup guides Also Included:- Various adapters, injector pump plungers, nozzle sets, plastic bottles, holding plates, etc. Specifications:- Model: FXp Workstation - Serial No.: A318440537

Amersham Biosciences Ettan Spotter, Various Parts & Accessories This was removed from a universi (more)ty lab where it was surplus to requirements. The unit has been tested and works well. A Windows XP PC with Ettan Digester software is included. It is in good cosmetic condition with minor marks Included are; Pre-Cut Aluminium Foil Microplate Sealers - Code#: 676003 x 2 215 Utility Programs Ettan Spotter Test Procedure Ettan Spotter Instrument Handbook Ettan Spotter User Manual Ettan Spotter Safety Handbook Ettan Digester Control Software 1.10 Calibration Plate Calibration Tool Distance Tool 215 Level Sensor Cable Assy Fuse, 2.5 amp T-2.5 Clip, Extruded Cable/Tubing Fuse Drawer 110/120V Coupling 1/4-28, PVDF Shielded Gsioc Cable 30"

This listing is for a Eppendorf epMotion 5075 Liquid Handling System.The unit is in full working con (more)dition and is ready for immediate release.This Unit is supplied with PC and accessories.The Eppendorf epMotion 5075 is a sophisticated solution for automating liquid handling tasks, designed to enhance efficiency and accuracy in laboratory settings. Here’s a detailed look at its key features and specifications:Key Features:Accelerated Operational Speed: The epMotion 5075 significantly reduces the time spent on manual pipetting, allowing for faster throughput in critical experiments.Versatile Worktable: With up to 12 deck positions, the system adapts seamlessly to various liquid handling applications, whether you’re doing PCR setup, cell culture, or reagent transfers.User-Friendly Software: Utilizing Eppendorf’s epBlue™ software, the system simplifies the programming of liquid handling tasks. The intuitive software assistant concept means that users can quickly learn to operate the system with only minimal training.Enhanced Decontamination Standards:CleanCap Option: Features UV light decontamination and a HEPA filter for purified air, ensuring high standards of sample safety and contamination control.Optical Sensor Technology: An integrated optical sensor checks labware, liquid levels, and tip counts at the beginning of each cycle, minimizing errors and enhancing reliability throughout operations.Technical Specifications:Model: epMotion® 5075Catalog Number: 5057 SeriesDimensions: 107 x 61 x 67 cm (43 x 24 x 27 in)Electrical Requirements: 110 - 130 V, 50/60 HzType: Automated pipetting and liquid handling systemDeck Capacity: Up to 12 positionsAccuracy:At 1 µL: ±15% or ±5%At 50 µL: ±1.2% or ±0.4%At 1,000 µL: ±0.7% or ±0.15%

This item has just arrived in our stock. Please enquire for further details.

Water bath from 25°C to 100°C for the laboratory The water baths of the LAUDA Hydro series are the i (more)deal tools for any laboratory application, whether biological, medical or biochemical and guarantee a homogeneous temperature distribution without overheating problems. High quality stainless steel and thoughtful design, provide the ideal depth and opening for any application with bathroom volumes from 4 to 41 liters. All water baths offer a temperature range up to 100°C, with a temperature stability of ±0.1K, so that applications even in the boiling range are possible. A TFT color display ensures intuitive operation with temperature display in °C and °F. Application examples - Preparation of cellular, biological or medical samples - Microbiological test incubation - Thawing of the samples - Conducting chemical reactions Notable features - Three timer functions for the user - Electric resistance inside the tank - Direct temperature control for fast and precise heating - Visual and acoustic alarm in case of lack of water, low / high temperature and sensor break - Digital and electromechanical safety system - Lid designed to prevent condensation from dripping onto samples - Exhaust valve on all models Standard equipment - Lid and drain tap in heat-insulating double-walled stainless steel Accessories available Water level regulator. Highest quality materials: tank interior, lid, sieve and heating element made of stainless steel. Heat insulating lid in stainless steel, double walled with internal curvature to guide the condensate. Dump valve on all Hydro Lauda models. Simple control panel with large TFT display with extensive information; change settings and navigate quickly and easily. Optical and acoustic alarm for low water level and over/under temperature as well as sensor breakage/short circuit. Optimized space, safety and comfort of use. Connection for water level regulator (available as accessory). Recommended accessories - Water level regulator. Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

A laboratory oven with forced ventilation and an exceptional quality/price ratio! 100% Made in Italy (more) and with all accessories already included as standard. Fine temperature regulation, clear and complete display, top safety class, front regulation of the pipe on the back for exhaust fumes. MATERIALS:    - External structure in steel painted with anti-acid epoxy powder    - Inner chamber in 18/8 stainless steel    - Ergonomic handle, easy to use and robust INSTRUMENT SAFETY SYSTEM The oven has an independent electronic safety system. The electronic circuit DOES NOT depend on the main thermoregulator and will work even if the main board is broken. If the temperature exceeds the set point by a certain number of °C (set by the user), the LED will light up and the oven will continue to operate at the safety temperature. STANDARD:     - PID thermoregulator with double display and adjustable temperature up to 300°C    -  2 shelves     - pipe on the back for exhaust fumes with front opening/closing adjustment device     - 10 mm hole on the upper side     - Digital timer from 0 to 99 hours and 59 minutes + ∞     - Indication of the power used     - Auto-tuning (automatic temperature calibration)     - Possibility of manual temperature correction (e.g. with certified thermometer)     - Safety class DIN 3.1, the highest     - Manual adjustment of the over-temperature alarm     - IP protection: 42 Laboratory Oven STF-F 52 FALC Forced Ventilation

Waterproof platform scales H315/HR series is designed for operation in locations with high humidity  (more)or direct contact with water. The scales is easily used in areas with no access to power supply from mains, as it features an internal rechargeable accumulator. Design Single load cell stainless steel platform scales H315 HR series is based on a terminal PUE H315 series. The terminal features large backlit LCD display and function buttons for easy operation. The terminal is installed on a pillar for easy readout of measurement result. Optionally, the scales is offered with indicator installed on a cable for mounting it on a wall. The weighing platform structure is made of stainless steel class AISI 316 with a stainless steel load cell providing the highest IP rating of 68. The scales features RS 232 interface, and optionally an additional display socket. The scales is powered from mains or internal rechargeable accumulator. Optionally, the scales can be powered from mains - 110/120VAC 60Hz (non-standard factory option).

The H315 waterproof scale Made to work in high humidity conditions and even direct contact with wate (more)r. Designed for precision measurements, making it used in situations where weighing readability is crucial. The power of steel The use of stainless steel for the construction guarantees you a long life for the balance. It is not afraid of contact with moist objects or accidental splashes. The robustness and strength of the design of the platform scales makes it possible to weigh large objects, such as pallets of goods. The stable platform is resistant to vibration, which is important when weighing large objects. Not just weighing But also parts counting, percent weighing, animal weighing and peak hold. The power of H315’s working mods. Do you require fast and repeatable weight measurement under difficult conditions? The H315 scale is made for that! It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Inner power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the H315 scale allows many hours of operation without mains power (up to 7 hours). Battery power supply is available at an extra charge. As standard, the scale is equipped with a RS232 cable, to which you can connect most of the accessories from our range.

The UMA 2.5Y.F automatic weighing system has been designed to test mass changes of filters made of  (more)quartz glass fibre, glass fibre, teflon and teflon covered with glass fibre. Mass measurement is carried out with readability of 1 μg or 0.1 μg. The weighing system enables conditioning filters in accordance with PN-EN 14907 and PN-EN 12341 standards. Effective and Excellent Measurement The UMA 2.5Y.F automatic weighing system is a first-class solution for professional mass measurement. Dynamic control and correction of mass indications both ensure fast and stable weighing regardless of the weighed filter type. The UMA weighing systems, due to the elimination of the human factor, temperature changes and air drafts, guarantee excellent measurement repeatability. Effective Weighing Analysis Full automation of the weighing cycle, thanks to the elimination of the ‚human factor’, is a guarantee of measurement repeatability impossible to be obtained in case of manual weighing. Remote programming of measurement processes significantly increases operation efficiency. Dedicated Software The RMCS Filters software allows to manage time and comparison test plans of each filter or filter series. Summary reports and report components are defined by the system administrator. Metrological Control Periodically, correctness of weighing system operation is verified via a certified mass standard or a reference filter. Compact Design The UMA 2.5Y.F automatic weighing system can be easily adapted to any laboratory conditions. The device size facilitates its placing on the anti-vibration table of standard dimensions. Ambient Conditions Module The ambient conditions module is housed inside the bottom part of the weighing system. This results with a laminar air flow that does not disturb the ongoing filter mass measurement. The range of temperature and humidity changes is automatically forced in accordance with the values programmed via device terminal.