NEW! Cytiva GE 28-9564-04 Cassette for fraction collection in 15 mL tubes

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Applied Biosystems/MDS SCIEX Pro ID Software V1.1 This was removed from a university lab where it w (more)as surplus to requirements. The item is in reasonable cosmetic condition. There are some minor marks on the disc. The case has some signs of wear. Also included are the following:1x Pro ID Software 1.1 Release Notes1x Validation Certificate, dated 05/01/2005

Applied Biosystems MDS SCIEX QStar System Software This was removed from a university lab where it w (more)as surplus to requirements. Included are the following: 1x Analyst® QS 1.1 SoftwareP/N 1012847 1x Metabolite ID 1.3 for Analyst® QS 1.1 SoftwareP/N 1012866 1x Analyst QS 1.1 Software Validation CertificateDated 03/12/20041x Metabolite ID 1.3 for Analyst® QS 1.1 Validation CertificateDated 03/12/2004. 2x Copies of License Agreement for Analyst® QS 1.1 Software1x Metabolite ID 1.3 for Analyst® QS 1.1 Software Release Notes

Gas chromatograph Hewlett Packard 6890 Series. Detectors mounted FID and ECD. Injection system "spli (more)t/splitless". Suitable for the detection of cannabinoids, terpenes, pesticides, solvents, aromatic components, among others. Detection times are very stable. Software ChemStation or Clarity to comply with CFR21 Part 11 (+ € 1,500), required for IQ / OQ. PC. Includes user manuals. Agilent Technologies - 6890 opt. 211 Flame Ionization Detector (FID) Manual (click here)

Spectrophotometer UV/Vis Agilent 8453 (G1103A). Range wavelength from 190 to 1100 nm. Detector fotod (more)iodoarray. Reading in less than 1 sec. Includes PC with software built-in UV/VisChemstation B4: advanced, biochemistry. Pack dissolution and general. Includes instruction manual. < 1.0 % At 200 nm, solution of 1.2% KCl, scanning white in air, 5s integration time; (EP*method)** < 0.05 % At 220 nm, solution of 10 g/l NaI, scanning of the target in air, a 5-s time ingegración; ( ASTM method) < 0.03 % At 340 nm, solution of 50 g/l NaNO2, escanéo white on air, 5 s integration time. ASTM method Software: UV/Vis Gemstation B04

SCALES SUITABLE FOR EVERY USE The Navigator Series is perfect for general weighing applications in l (more)aboratory, industrial, education, retail, commercial, manufacturing, food and portioning environments. A powerful, rugged and multifunctional scale capable of handling a wide range of weighing applications with features such as fast stabilization time, overload protection four times its rated capacity and easy operation. - Excellent value for money - One-second stabilization to improve efficiency, productivity and throughput - Overload protection system, capable of withstanding loads up to four times higher than the nominal capacity: protect the scale from improper use. Applications Weighing: Determines the weight of the items on the pan in the selected unit of measure. Piece Counting: Count the number of pieces on the pan using a uniform weight. Percent Weighing: Measures the weight of a sample displayed as a percentage of a pre-set reference weight. Checkweighing: Compares the weight of a sample against the set targets. Other standard features and equipment ABS construction, stainless steel weighing pan, transport lock, menu switch and safety lock for adjustment, non-slip and adjustable feet, bubble level, mechanical and software overload/underload protection, indicator stability, low battery indicator, auto power off, user selectable print options, user selectable communication settings. MODELLI DISPONIBILI Applications Weighing, Parts Counting, Percent Weighing, Checkweighing Display Liquid Crystal Display (LCD) with backlight Operation AC adapter (included) or 4 C batteries (not included) Communication RS232, USB, or Ethernet (available as accessories) Construction ABS housing, stainless steel pan, transportation lock, slip-resistant and adjustable feet, leveling bubble Design Features Menu and calibration lock switch, mechanical and software overload/underload protection, stability indicator, low battery indicator, auto shut-off, user-selectable print options, user-selectable communication settings SUITABLE FOR ANY FIELD AND USE EDUCATIONAL: valuable overload protection system. Additionally, the portability of the Navigator balance makes it ideal for field experiments. LABORATORY: simple to clean, precise and easy to use in the laboratory. Ideal for laboratory applications such as formulation, quality inspection, testing and experimentation. INDUSTRY: Robustness, speed and accuracy, it is ideal to use in medium-light industrial applications such as paint and ink mixing, packaging, sampling and piece counting. SALES, TRADE, AND MANUFACTURING: Rugged, Portable, and Reliable. Ideal for use in shipping and receiving, retail or warehouse environments. Battery operation and counting and checkweighing modes expand the possibilities of use in hobby, inventory management, inspection and quality control. FOOD AND PORTIONING: hygiene, duration and reduced maintenance. Ideal for portioning and in pre-packaging. Units of measure such as kg, g, lb, oz, lb:oz and checkweighing and percentage checkweighing modes enhance their utility at the counter, in prep and in the kitchen.

Type of movement: orbital Shaking stroke: 4.5 mm Permissible ON time: 100 % Speed range: 200 – 2500  (more)rpm Speed display: scale Operating mode: continuous operation Touch function: yes Dimensions (WxHxD): 115 x 80 x 230 mm Weight: 3.2 kg

Yamato FP-413 High Performance Muffle Furnace 11.3L, 220V Operating Temperature Range 100°C to 1150 (more)°C Max. Temperature Reaching Time ~80 min. Internal Capacity 11.3L Features - RCF-free chamber - High-temperature accuracy at ±1.0°C - Upgraded with long-life R-thermocouple sensors - High accuracy controller for better operability and visibility - Excellent heat tightness with a firmly sealed chamber door - Program operation of maximum 99 steps, 99 patterns, with repeat operation function - High-quality alumina porcelain hot plate where the heater is not exposed to the inner chamber preventing contamination of samples - Safety features include self-diagnostic functions, calibration off-set, key lock function, auto-recovery after a power failure, earth leakage breaker, automatic overheat prevention device, and independent overheat prevention device High performance 11.3L muffle furnace with a microprocessor-controlled thermo-regulator characterized by excellent repeatability and features temperature resistant paint. High accuracy controller for better operability and visibility. Excellent heat tightness with a firmly sealed chamber door. High temperature accuracy at ±1.0°C. Upgraded with long life R-thermocouple sensors. High quality alumina porcelain hot plate where heater is not exposed to the inner chamber preventing contamination of samples. Program operation of maximum 99 steps, 99 patterns, with repeat operation function. Safety features include self-diagnostic functions, calibration off-set, key lock function, auto recovery after power failure, earth leakage breaker, automatic overheat prevention device and independent overheat prevention device. Optional items include exhaust system, N₂ gas loading device (with flow meter), temperature output terminal, time-up output terminal, sample tray, external communication terminal (RS232C), external communication adapter, event output terminal, operation signal output terminal and furnace floor plate. Temperature range 100°C or 1150°C. INCLUDED: The Yamato FP-413 High Performance Muffle Furnace 11.3L, 220V includes: - Exhaust port cap, fuse, furnace floor plate - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

E1-class mass standards are the elite in the world of metrology, because standards of this class rep (more)resent the highest level of precision and accuracy in mass measurement. The E1 classification is one of the most stringent standards that standards must meet in order to be considered the most advanced and trustworthy measurement tools. E1 - class standard: stainless steel wire Nominal value: 20 mg Material: stainless steel What Are the Characteristics of the E1 Class? Highest Precision - The allowable deviation from the actual weight is minimal, making standards of this class ideal for applications where every gram matters. Stability and Repeatability - This guarantees a consistent level of accuracy over the long term. Accurate Calibration - Standards of this class must be regularly compared with other standards of known mass to confirm their measurement accuracy. Materials with Unique Properties - E1 class mass standards are often made of materials with exceptional physical properties, which makes them stable and resistant to changes in environmental conditions. Application 1. Analytical Laboratories In analytical laboratories where accurate measurements are crucial, E1 class mass standards are used to calibrate balances with the highest precision. 2. Pharmaceutical Industry In drug manufacturing, where even the slightest deviation from the standard affects quality, E1 class mass standards are irreplaceable. 3. Scientific Research In scientific research, especially in areas requiring the highest precision, such as physics or chemistry, E1 class mass standards are used to ensure reliable results. 4. Metrology Industry In metrology laboratories where research on E1 class mass standards alone is carried out, E1 class standards are the standard of excellence. Class E1 mass standards are not only measuring tools, but also a symbol of metrological excellence. Their use affects the quality of measurements in various areas of life because they provide precision that can be relied upon. They are a key element in the world of mass measurement, shaping standards and raising the bar for all measurement tools.

Motic PX43MET Trinocular Inverted Industrial Microscope w/ Moticam S6 Objectives S-APO BD 5X, 10X,  (more)20X, 50X Objectives Optical System Color Corrected Infinity Optical System (CCIS) Illumination Köhler Quartz Halogen 12V/100W with Intensity Control Features - DIC for better depth imaging. - Brightfield and Darkfield contrast methods to ensure compatibility with a variety of applications. - Advanced measurement, image processing and documentation through a Moticam and the Motic Analysis Software. - 360° Swivel Range guarantees effective use of laboratory space. - Can be used with SLR and DSLR Camera via 2.5x and 4x Camera Eyepieces. - Motic ECO Smart Sense is an infrared sensor built into the stand which detects whether or not there is a user working in front of the microscope. Motic’s PX43MET is a professional Inverted Metallurgical microscope designed to inspect polished cross-sections as well as larger, bulkier materials samples. The microscope is a best fit for automotive, machinery, and metal fabrication industries and similar fields. INCLUDED: The Motic PX43MET Trinocular Inverted Industrial Microscope w/ Moticam S6 includes: - Plan S-APO BD 5X, 10X, 20X, 50X Objectives - Moticam S6 - 12.5x7.5inch stage with metal plate - Quintuple Revolving Nosepiece - Fine Focus Knob - UC-WF 10X/FN22 Eyepieces - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty