Holten LaminAir Class 2 Bio Safety Cabinet

This FASTER BH-EN 2004-D Class II Biological Safety Cabinet was removed from a university lab where  (more)it was surplus to requirements. The unit powers up and is in working order. It is in good cosmetic condition with minor marks from use. Internal Dimensions are W 119cm x D 59cm x H 73cm.

CABINET FIRE Series MY11 Gray 60 BASIC - CHEMISAFE - Entirely made of 1 - 1.5 mm thick electrogalvan (more)ized sheet steel, cold bent - Gray RAL 7035 - External finish made of acid resistant epoxy resin and passage through a thermal tunnel at 200 °C - Cabinet insulation with high density rock wool panels and calcium sulphate panels - Internal finish with melamine panels highly resistant to chemical and aggressive vapours - Facility that allows replacement of spare parts if necessary - Automatic closing of the doors when the room temperature exceeds 50 °C - 30 mm heat-expanding insulating gaskets which, in the event of a temperature increase, guarantee perfect sealing of the cabinet according to the EN14470-1 standard - Air inlet and outlet with certified fire dampers that close the ducts when the temperature exceeds 70 °C according to standard 4102-6 - Preparation for ventilation through a Ø 100 mm flange for an external connection or a filtration ventilation system (see chapter on ventilation) - Closing and locking system that allows to keep the cabinet doors open and to close them automatically in case of ambient temperature above 50 °C - Anti-spark hinge which guarantees perfect solidity of the doors - Grounded cabinet - Adjustable leveling feet - Door with lock and key - 3 shelves in painted steel (BASIC series) or in stainless steel (EASY series) adjustable in height, 1 retention tray with grid - Shelf fixed with aluminum pins, excluding all risk of sparks - Shelves tested for fire resistance - ISO 3864: Signs with pictograms - Certified with fire resistance 90 minutes, according to the EN14470-1 BV standard (Bureau Veritas) - Certified according to the EN16121 BV standard (Bureau Veritas) - Easy replacement of spare parts in case of damage - Available in the version with double capacity and external dimensions WxDxH: 200x600x1950mm Supplied: - 3 painted steel shelves (max load 60 kg evenly distributed) + 1 pan with grid (capacity 20 litres) - Door hinge on the left, on request on the right Optional: - Shelves - Timer - Open door alarm - Ventilation - Electric aspirator - Activated carbon filter - Cooling system - Internal carbon dioxide system with automatic thermal activation (62°C)

Esco Class 2 BSC Airstream AC2-2E8 Safety Cabinet This was removed from a university lab where it wa (more)s surplus to requirements. The unit powers up and is in full working order. It is in very good cosmetic condition with minor marks.

Thermo Fisher Safe 2020 1.8 Class 2 Biological Safety Cabinet Lab This item was removed from a unive (more)rsity lab where it was surplus to requirements. The unit powers on and the fan, airflow, white light, UV, and window up/down function properly. It is in good cosmetic condition with some minor marks from use. Safe Working area 78 x 180cm Unit height with stand: 226cm Included is Vacuubrand VHC PRO Vacuum Hand Controller as well as the stand. Socket tester not included.

PSM / ESCO AIRSTREAM PLUS (AC2-5E8-TU) 1.5m microbiological safety cabinet New equipment in its orig (more)inal packaging Complete pack including: PSM ESCO Airstrem plus class II AC2-5E8-TU length 150cm (1.5m) A UV-30A UV lamp A fixed support with leveling feet Height: 71cm SAL-5A0 GEN2 2 internal sockets TüV NORD EN 12469 certified model Automatic regulation and malfunction alarm and dry contact for alarm report Dual economical motors ensuring permanent and stable flow control Removable stainless steel worktop, with a large work surface and inclined underplane for liquid retention LED lighting Control panel with clear flow display, window position Silent operation The PSMs are equipped with 2 electrical sockets and a UV lamp Depth without armrests: 767 mm / with armrest: 823 mm Motorized front window, stops at the working position External stainless steel armrest on the entire front part Nominal size: 1.5 m External dimensions: 1645 x 767 x 1400 mm (L x D* x H) Internal dimensions: 1525 x 580 x 654 mm (L x D x H) External depth without / with armrest: 767 / 823 mm Weight: 293 kg Model: AC2-5E8-TU Gross weight: 309 kg Gross dimensions: 172 x 90 x 174 cm The sheet metal slide covers are slightly deformed at the bottom, but this does not hinder the proper operation of the PSM or the opening and closing of the window Year of manufacture: 2016

LAF cabinet has been validated and maintained by Interflow as recently as March 2022 and has been fo (more)und to be approved in accordance with NEN-EN-ISO 14644-1. Qualification/validation and maintenance reports are supplied with the cabinet. The cabinet has been neatly maintained every year since purchase in 2006 and is in excellent condition. The cabinet has been specially gassed (decontaminated) before sale.

Integra Vacusafe aspiration system for cell culture with integrated pump with vacuum control, 4 L sa (more)fety coated glass bottle with lid with quick coupling, self-closing connectors, tubing setting and Vacuboy manual vacuum operator and tips. Hydrophobic filter for vacuum source protection. VACUSAFE is a compact laboratory aspiration system providing a safe and efficient way to collect and contain biological liquid waste. Vacuum systems are widely used for aspiration of liquids and their subsequent disposal. Protecting the vacuum source from contamination by liquids and aerosols with an overflow trap and a filter is not only good laboratory practice, but also imperative as a personal protection measure when working with biological, chemical or radioactive liquids.

Samples and applications - Food homogenization and preparation of spreadable creams and stuffing for (more) foods (e.g. meat, vegetables) - Preparation of samples for DNA analysis, organic tissue samples and dispersions of organic tissues - Homogenisation of tobacco leaves - Processing of textile fibres - Sterilization and cleaning methods: it is possible to sterilize all the components of the dispersing tool in different ways according to the construction materials and the sample processed TECHNICAL DATA - Rotor diameter: 15 mm - Stator diameter: 20 mm - Stator/rotor gap: 0.5 mm - Volume (H2O): 50 - 2,000 ml - Immersion depth: 40-175 mm - Max. speed: 25,000 rpm - Max. circumferential speed: 19.6 m/s - Ultimate fineness, emulsions: 1-7 µm - Ultimate fineness, suspensions: 5-40 µm - Max. allowable working temperature: 180 °C - Materials in contact with the medium: AISI 316L, PTFE - Suitable for solvents: Yes

Scilogex MicroPette Plus 12-Channel Autoclavable Pipettor, 0.5-10μlThe MicroPette Plus pipettes are  (more)fully autoclavable, enable easy cleaning and reduce the risk of contamination. Steam autoclaving can be performed at 121°C, 1 bar for 20 minutes. After autoclaving, the pipette must be cooled down and left to dry for 12 hours before use. It is recommended to check the performance of the pipette after each autoclaving. Greasing and sealing of the pipette piston after every 10th autoclaving will secure an enhanced function.CalibrationAll SCILOGEX pipettes have been quality tested according to ISO8655-2:2002 and are supplied with individual calibration certificates. The quality control includes gravimetric testing of each pipette with distilled water at 22°C.Product Features - Lightweight and ergonomic design - Fully autoclavable - Clear digital display - Staggered tip ejector for easy tip ejection - Head rotates 360° for user comfort. - Easy to calibrate with tool supplied. - Used with 'universal' pipette tips. - Dispensing head rotates for effortless pipetting convenience. - Individual piston and tip cone assembly allow for easy repair and maintenance - Compound material-made tip cone secures high sealing performance - Compatible with most universal tip brands INCLUDED: The Scilogex MicroPette Plus 12-Channel Autoclavable Pipettor, 0.5-10μl includes: - Two Year Manufacturer's Warranty

Jenesco FM-1 Ozone Generator The Jenesco FM-1 Ozone Generator is designed for residential applicatio (more)ns for use in eliminating tough odors and our least expensive machine for shock treatments of mold and mildew. Its high output (2000 mgph) is more than sufficient to attack mold and mildew, viruses and spores. The FM1 uses 2 laser cut silicone composite plates with stainless steel grids, to produce the maximum ozone output using ambient air as the source gas. They can easily be removed for cleaning, by merely removing a single thumb screw. The FM1 has coverage of up to 3500 sq feet for odors, 500 sq feet for mold. The ozone output is 2000 mgph (milligrams per hour) when used at normal air humidity of 60%. Electrical: 120VAC, 40W, 2A. Made in the USA.INCLUDED: The Jenesco FM-1 Ozone Generator includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA M20 Universal Mill Useable Volume Max. 250 ml Speed Max. 20000 rpm Feed Grain Size Max. 7 mm  (more)Features - Double-walled grinding chamber with water cooling for precise temperature control. - Removable grinding chamber for easy cleaning. - Dual operation capability with two grinding chambers using one drive unit. - Includes M 21 blade for efficient grinding of hard and brittle substances. - Robust stainless steel construction for durability and reliability. The IKA M20 Universal Mill is a robust batch mill designed for dry grinding of hard and brittle substances up to 250 ml at a fixed speed of 20,000 rpm. Featuring a double-walled grinding chamber with water cooling capabilities through two hose adapters, it ensures precise temperature management during operations. The removable grinding chamber simplifies cleaning and maintenance, while its dual-chamber operation with a single drive unit enhances versatility. This mill includes the M 21 blade, crafted from stainless steel, to effectively handle challenging milling tasks in laboratory settings.INCLUDED: The IKA M20 Universal Mill includes: - M20 Mill - M 21 Blade - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA M20 Universal Mill SpecificationsProcess typebatchOperating principlecutting/impactMotor rating input450 WMotor rating output225 WSpeed max.20000 rpmCircumferential speed max.72 m/sUseable volume max.250 mlFeed hardness max.5 MohsFeed grain size max.7 mmMaterial beater/cutterstainless steel 1.4034Material milling chamberstainless steel 1.4301Power-ON time7 min Power-OFF time10 min Milling chamber, can be cooled with wateryesMill feed can be cooled in milling chamber with dry iceyesDimensions (W x H x D)170 x 350 x 170 mmWeight6.6 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 21Voltage230 / 115 / 100 VFrequency50/60 HzPower input550 W Request a Formal Quote