ENVAIR Safe Comfort Plus Safety Cabinet

This Don Whitley Scientific miniMACS Anaerobic Workstation was removed from a university lab where i (more)t was surplus to requirements. The unit has been looked at by a qualified service engineer. The pump works from the main socket but not from the instrument socket. They cleaned the filter which was previously making the pump run loudly. They repaired the fans which were previously broken. They have tested the cabinet with a vacuum pump and it seems it is holding the vacuum. Although one piece of plexiglass holding the right door lock is broken. The system holds a vacuum despite this. The temperature was tested up to 37˚c, it took about an hour to reach this. It is in reasonably good cosmetic condition but has some minor marks from use and the aforementioned crack.

Nuaire Class 2 Biological Safety Cabinet NU-437-400S This was removed from a university lab where it (more) was surplus to requirements. The unit powers up and is in good working order. It is in good cosmetic condition with minor marks.

Envair Bio 2+ Class 2 Microbiological Safety Cabinet This was removed from a laboratory where it was (more) surplus to requirements. The unit powers up and is in full working order. It is in good cosmetic condition with some minor marks from use. Socket tester not included. Internal dimensions:Dx55 Wx106 Hx70cm

A programmable laboratory oven with multiparametric microprocessor with the possibility of memorizin (more)g 4 programs with 8 segments each. Fine temperature regulation, clear and complete display, top safety class, front regulation of the pipe on the back for exhaust fumes. MATERIALS:     External structure in steel painted with anti-acid epoxy powder     Inner chamber in 18/8 stainless steel     Ergonomic handle, easy to use and robust STANDARD:     PID thermoregulator with multi-display and adjustable temperature up to 300°C     4 storable programs with 8 segments each     Setting up ramps in °/min     2 shelves     pipe on the back for exhaust fumes with front opening/closing adjustment device     10 mm hole on the upper side     Safety class DIN 3.1, the highest     IP protection: 42 INSTRUMENT SAFETY SYSTEM The oven has an independent electronic safety system. The electronic circuit DOES NOT depend on the main thermoregulator and will work even if the main board is broken. If the temperature exceeds the set point by a certain number of ° (set by the user), the LED will light up and the oven will continue to operate at the safety temperature. Programmable OVEN STF-NR FALC

CABINET CSB120UB - CHEMISAFE Modular solutions for storing chemicals. - Entirely made of 15/10 mm t (more)hick electrogalvanized steel sheet, cold bent - External finish made of 90 micron acid resistant epoxy resin and passage through a thermal tunnel at 200 °C - Monocoque construction with feet for leveling the cabinets - Simple single layer swing doors - Lock and key - Door opening at an angle of 110° - External zip in corrosion resistant plastic - Compartments equipped with fixed retention shelves made of plasticized/painted/stainless steel with adjustable height - Connection collar Ø 125 mm - Standardized pictograms according to ISO 3864 standards Supplied: - 2 ripiani realizzati in acciaio plastificato (carico max 40 Kg distribuiti uniformemente) Optional: - Shelves - Timer - Plinth - Retention tank - Door open alarm - Ventilation - Filter

External dimensions (WxDxH): 600 x 595 x 635 mm Internal dimensions (WxDxH): 503 x 463 x 480 mm Max  (more)single load: 10 L Max symmetrical distributed load: 30 kg Weight: 125 kg

Leitz Wetzlar Dialux 20 Microscope This was removed from a university lab where it was surplus to re (more)quirements. The unit is in good cosmetic condition, with all mechanical elements in working order. Includes the following. 1x Leitz Lamp Power SupplyObjectives: 1x Leitz Wetzlar P 10/0.25 170/- 1x Leitz Wetzlar NPL FLUOTAR 40/0.70 160/0.19 PHACO 2 1x Leitz Wetzlar PLAN 100/1.25 oil 160/0.17

Julabo DYNEO DD-310F Refrigerated Circulator with Natural Refrigerant (R290), 115V/60Hz Refrigerant  (more) R290 Working Temperature Range -30°C - 200°C Cooling Capacity 300W at 20°C Features - Powerful cooling machines - Suitable for internal and external applications - Optimized cooling coil design saves space in the bath tank - Powerful and infinitely adjustable pressure pump - Flow rate 27 l/min, pressure 8.7 psi - Easy switching between internal and external circulation - Large color TFT display, multilingual interface - Central rotary knob (controller) simplifies operation - Integrated programmer for 8 x 60 program steps - Integrated external Pt100 connection - USB port - RS232 interface or analog interfaces (optional) - Bath cover included with delivery - Integrated drain makes emptying liquid easy and safe - Class III (FL) according to DIN 12876-1 DYNEO™ DD-310F refrigerated/heating circulator with an operating range of -30…+200 °C and ±0.01 °C stability. Suitable for temperature applications with circulation to an external apparatus or immersing a device in the bath tank. The DYNEO™ DD circulator incorporates easy change-over for control of fluid circulation internally or externally. A color TFT display with central rotary knob controller includes a multi-lingual interface, integrated programmer, Pt100 port for external temperature control, USB-B connection for external PC control and USB-A for data-logging. Additional communication options include an RS232 port or an analog module interface, for voltage or current control. Infinitely variable centrifugal pump capacity of 8-27 L/min with pressure to 1.5-10.2 psi. Stainless steel bath tank (3-4L) with integrated drain port. Unit fittings: M16x1 male threaded adapters including a pair of 8 and 12 mm hose barbs. 0.3kW cooling power at 20 °C with 20W at -30 °C. Options for heating power (1kW or 2kW) and refrigerant (R290 natural refrigerant or R449A synthetic refrigerant).Class III (FL) according to DIN 12876-1.INCLUDED: The Julabo DYNEO DD-310F Refrigerated Circulator with Natural Refrigerant (R290), 115V/60Hz includes: - 2 Each Barbed Fitting for Tubing 8 and 12 mm Inner Dia. (Pump Connections M16x1 Male) - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Multiposition magnetic stirrer MULTISTIRRER 6 digital Velp The MULTISTIRRER Digital series is one of (more) a kind and represents the state of the art of multi-position stirrers, being equipped with both a digital display, in order to be able to precisely set the stirring speed, and a timer. The Timer: used as a countdown with consequent automatic shutdown or for an inversion of the rotation, automatically and based on the time interval pre-set by the user. The display: digital, which allows a precise setting of the stirring speed, reaching the speed of 1500 rpm with 10 rpm steps. SpeedServo™ system: ensures a constant speed even when the viscosity varies (counter-reaction). The worktop: in stainless steel to ensure unparalleled resistance and thorough cleaning. The MULTISTIRRER Digital remain cold even after several days of operation, a highly appreciated feature in microbiology and biochemistry. Samples can also be thermostated by combining the stirrer with a recirculating water bath. ROBUST AND PRACTICAL - The control panel is protected from liquid spills - Heavy duty steel construction with epoxy coating - Stainless steel cover - Very low height - ergonomic - Lightweight, easy to move - Designed for maximum durability and backed by a 3 year warranty THE ADVANTAGES OF THE VELP MICROSTIRRER - Clear surface for viewing particles and color changes - Intermittent mode schedules to suit your workflows - It doesn't get hot, even after days of continuous use - Can thermostat samples using a recirculating water bath - Ideal for microtitration, microbiology and biochemistry - Soft start but quick achievement of the set speed - High power magneto 'PCM' driven by single phase motor for continuous operation - Timer from 1 to 900 minutes; continuously - Rotation reversal: 5 to 900 seconds

The HX7.4P2 C is a powder coated beam scale equipped with the PUE HX7 indicator. This 4-load-cell me (more)chanical design can be used in a wider range of applications when compared to the standard pallet solutions. Beam spacing allows to place any loads onto the scale using either a forklift or a transporter crane. Transport-supporting handles facilitate transfer of the device to the place of use. The indicator has been outfitted with a colour 7" graphic display and a diode bar graph which via red and green lights presents the current load mass referred to the scale range or preset minimum and maximum thresholds. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety.

Precision Balance WTC Fast and accurate mass determination both in the lab and in the factory. Energ (more)y-efficient electronics and display, combined with an internal rechargeable battery, are the perfect duo to allow you to work without access to mains power. Precision not just in the name When we designed this balance, we took care of the smallest details – both those you can’t see, hidden in the solid housing, and those you can touch. This balance is the result of a combination of our experience and true precision. The power of steel The use of stainless steel for the pan guarantees you a long life for the balance. It is not afraid of contact with moist objects or accidental splashes. Time counts The balance is equipped with a real-time clock that provides accurate time measurement in a way that is independent of external power supply. It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Internal power No access to mains power? Power failure? No problem. The internal rechargeable battery combined with the energy-saving display and electronics allow many hours of operation without mains power. Anything else? Plenty! Printer, computer, USB flash drive, additional display – the WTC balance can work with them through communication interfaces. In addition, a real-time clock and ALIBI memory. You can find all accessories in our regular offer. And if you have questions about compatibility, our experts will help you. Do you need ALIBI? There you have it. ALIBI memory is like a black box of a balance. It records all measurements taken on the device. The ALIBI memory cannot be modified or erased. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW