Erlab Filtair 606

Perkin Elmer Janus Automated Workstation with Air Science Purair Advanced Ductless Fume Hood This sy (more)stem was removed from a university laboratory where it was surplus to requirements. It has been professionally serviced and deemed to be in full working order, a brief summary of the report is below: The workstation powers on, initializes successfully, and is in working order. Motion checks for the Varispan, barcode reader, gripper, Peri pump, and syringe pumps were completed without errors. The X and Y rails, as well as the gripper Z worm drive, have been cleaned and lubricated. Tip pick-up and liquid level sensing could not be verified as no tips or system liquid are included. The unit is currently secured with shipping clamps in place. There is no Software included with this system. The system is housed within an Air Science Purair Advanced Ductless Fume Hood, which powers on with both light and airflow functioning. Specifications: - Workstation Part No.: AJL8G01 - Workstation Serial No.: DG11118582 - Manufacture Date: November 2011 - Last Service: 06-12-2022 Fume Hood: - Model: Purair P30 - Serial No.: P90786 - Internal Dimensions: L173 W109 H116 cm - Last Service: 09/08/2022 Accessories: - Box of Plate Holders. - Various Cables. - 2 x Waste Bottles. - Waste Bin The system is in reasonable used cosmetic condition.

Protex Ventilated Workstation Model/Type - VB FH This was removed from a university lab where it was (more) surplus to requirements. The unit is in reasonably good cosmetic condition with minor marks from use. It has not been tested as it needs a power cable wired up. Workstation surface - 140 x 70cm Cabinet dimensions L95 W55 H54Internal - D49.5 W94 H53

CABINET CS 120 - CHEMISAFE - Made entirely of electro-galvanized steel sheet (Skin passat) FE P01, t (more)hickness 10/10 mm, cold pressed and painted, after degreasing treatment, with a first application of epoxy primer and with 2 subsequent applications of thermosetting powders and subsequent passage in a thermal tunnel at 200°C - “Monolithic” type constructions with feet at the base for leveling the cabinets - Double-paneled and reversible doors made of the same materials, complete with handles with safety locks and locks - CE marked electric fan with self-extinguishing, antistatic technopolymer case resistant to corrosive agents - Protection fuses: 5x20 mm, fast flow 1A - Aspirator flow rate: max 275 m3/h - Activated charcoal filter (optional) mounted on top, suitable for acid substances, with prefilter. Easy replacement of the filter behind a hinged panel with key lock - Handles with lock and key - Tray-shaped steel shelves with a thickness of 10/10 mm for the eventual containment of liquids in case of breakage or spread from the containers. Height adjustable - 110° opening that allows the shelves to be extracted without having to tilt them - Multilingual safety signs indicate the presence of dangerous and toxic products to highlight the contents and storage limits - Standardized pictograms according to ISO 3864 standards - Closure with safety lock and key - Compliant with EN61010-1 standards; EN16121 and CEI 66-5 Supplied: - 3 plasticized shelves (max load 80 Kg evenly distributed) Optional: - Shelves - Timer - Plinth - Retention tank - Door open alarm - Ventilation - Filter

Dimensions (WxDxH): 11800 x 940 x 2400 mm

Horizontal laminar flow hood OPTIGEL 12 ADS LAMINAIRE Work in a sterile environment and Product Prot (more)ection - Complies with ISO Class 5 (ISO 14644 Standard) Useful dimensions (WxHxD): 1225 x 575/620 x 570 mm Overall dimensions (WxHxD): 1245 x 813 x 916 mm Flow rate (m3/h): 1000 Fan type: DF 280 ECM Absolute filter (on blowing): M14-612-250-A-P Prefilter: W0412202C Power supply: Mono 220 + T 16 A 50 Hz Power: 500 W Weight: Approximately 100 kg Lighting level 600 to 800 lux on the worktop Year of manufacture: 2022 Hour counter: 20000h Original filters

IKA ROTAVISC lo-vi HELI Complete Viscometer Speed Range 0.01 - 200 rpm Setting Accuracy Speed 0.01  (more)±rpm Time Setting Range 0.017 - 6000 min Features - Measures low-viscosity liquids in various settings, from labs to quality control. - Includes spindle set, protective bracket, temperature sensor, and HELISTAND with T-spindle. - 4.3″ TFT display for intuitive menu navigation and digital spirit level for setup. - Accuracy: +/- 1% deviation and +/- 0.2% reproducibility for diverse fluids. - Offers stepless speed adjustment for enhanced measurement versatility. - Motorized HELISTAND for dynamic, precise viscosity measurement. *Similar Model Depicted Regardless of a simple or demanding viscosity measurement - IKA ROTAVISC lo-vi HELI Complete determines the viscosity of low-viscosity liquids in all areas of application ranging from the laboratory to quality control. The scope of delivery includes a standard spindle set (SP 1-SP 4), a protective bracket, temperature sensor and HELISTAND stand incl. T-spindle set. The generous 4.3″ TFT display allows for an intuitive menuguidance. A digital spirit level also supports the correct set-up of thestart-up condition. The simple ramp function simplifies repetitive tasks. Thelevel of measurement accuracy of the ROTAVISC rotational viscometer for bothNewtonian and non-Newtonian fluids is +/- 1 % of the measuring range. Thereproducibility is +/- 0.2 %. ROTAVISC is a viscometer, which offers steplessspeed adjustment. The motorized IKA HELISTAND moves the mounted viscometer andits rotating body slowly and uniformly up and down in the sample. Viscositymeasuring range: 15 - 6.000.000 mPas. Click Here to View Product Video INCLUDED: The IKA ROTAVISC lo-vi HELI Complete Viscometer includes: - Standard Spindle Set - Protective Bracket - Temperature Sensor - HELISTAND - T-Spindle Set - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

VortaMix Mini Vortexer blue V1000 Argos Technologies New equipment in its original packaging Mini bl (more)ue vortex reference V1000B Speed: 3,000 rpm Weight: 0.55 kg Dimensions: 96 x 85 mm Ambient temperature range: 5...40 °C

The epMotion 5075 is supplied with 3 dispensing tools which are inserted automatically. These dispen (more)sing tools and their appropriate pipette tips can be used to dispense quantities of liquid in the volume range from 1 µL to 1000 µL. The liquid is samples from the source tube in pipette tips, transported and deposited in the destination tube. On request, an optical sensor automatically checks the correct selection and positionning of tubes, available supplies and the position of pipette tips in the rack, as well as liquid level in some tubes. With the aid of predifined commands, you can create and edit simple or complex dispensing operations yourself and combine these into methods. In the process, you specify in the software, among other things, the source location and destination location as well as the desired dispensing or transport parttern. Equipped with following dispensing tools: TS 50 – volume range 1µL to 50 µL TS 300 – volume range 20 µL to 300 µl TS 1000 – volume range 40 µL to 1000 µL Including PC with software

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Adapter for erlenmeyers of 2L of Choice.