Sysmex XS-500i

This listing is for a Sysmex XT-1800i Automated Hematology AnalyzerThis system is complete, with PC  (more)and software disks.Designed to be reliable and efficient, the Sysmex XT-1800i offers medium volume laboratories an automated hematology system that can truly meet and exceed their expectations. The XT-1800i provides CBC and differential analysis using the same technologies as the other analyzers in the Sysmex XT-Series and XE-Series lines. Body fluid samples, including CSF, serous fluid and spinal fluid, are analyzed for RBC and WBC counts. A 6-part WBC Differential, including enumerated immature granulocytes (IG% and #), is optional for laboratories who need to reduce smear reviews. The XT-1800i streamlines your workflow by providing testing for up to 80 samples per hour, enabling rapid turnaround time.

This listing is for a Sysmex PU-17 Pneumatic Unit.The unit is in full working condition and is ready (more) for immediate release.The Sysmex PU-17 Pneumatic Unit vacuum pump is an essential component for haematology analysers, particularly in streamlining blood sample analysis. Here’s a closer look at its key aspects:Functionality:Vacuum Source: The PU-17 generates a reliable vacuum that is critical for the proper operation of haematology analysers. This vacuum allows the machine to aspirate blood samples efficiently, ensuring that the analyses—like cell counting and haemoglobin measurement—are accurate and consistent.Compatibility:Designed for Specific Models: It is specifically compatible with Sysmex haematology analysers, such as the Sysmex XN-1000 SA-01. This means that labs using these analysers can integrate the PU-17 easily, ensuring optimal performance without the need for extensive modifications.Importance in Haematology Testing:Efficiency in Testing: By providing a stable vacuum, the Sysmex PU-17 enhances the reliability of haematology tests, which are critical for diagnosing various conditions, including anaemia and infections.

SIEMENS RapidLab 1245 Electrolyte and blood gas analyzer for parts Model: RapidLab 1245 For parts, d (more)oes not work

The Sysmex XT Automated Hematology Systems utilize the power of fluorescent flow cytometry and hydro (more)dynamic focusing technologies. Using a unique, state-of-the-art, diode laser bench, Sysmex fluorescent flow cytometry provides the sensitivity needed for measuring and differentiating cell types in whole blood and body fluid samples. Fluorescent technology and hydrodynamic focusing enable the analyzers to consistently classify normal WBC, RBC, and PLT populations from abnormal populations, thereby decreasing the number of manual interventions. Principles & Technologies: Fluorescent Flow Cytometry – WBC-Diff, DC-Sheath-Flow – RBC; HCT; PLT, Cyanide-free SLS-Method – HGB 21 Whole Blood Reportable Parameters: WBC, RBC, HGB, HCT, MCV, MCH, MCHC, PLT (Impedance and Fluorescent Optical), NEUT%, LYMPH%, MONO%, EO%, BASO%, NEUT#, LYMPH#, MONO#, EO#, BASO#, RDW-SD, RDW-CV, MPV 2 Body Fluid Reportable Parameters: WBC-BF, RBC-BF Linearity: WBC; 0.00 – 440.0 x 10³/µL, RBC; 0.00 – 8.00 x 10⁶/µL, PLT; 0 – 5,000 x 10³/µL Throughput: Whole Blood – 80 samples/hour, Body Fluid –  30 samples/hour Sample Volumes: Automated Mode – 150μL, Closed Mode – 85μL, Capillary Mode – 40μL Dimensions (WxDxH): 530 x 630 x 720 mm Weight: 59 kg Including pneumatic unit

Designed to maximize turnaround time, RAPIDLab 1200 Systems have the capacity to enhance blood gas t (more)esting efficiency in the clinical laboratory by combining testing speed and reliability with low maintenance. RAPIDLab 1200 systems are our proven solution for high-volume critical care testing sites. Leverage the benefits of RAPIDLab 1200 Systems: Comprehensive test menu addresses a variety of critical care testing needs Intuitive operation and minimal maintenance help increase productivity without increasing staff. Industry-proven accuracy and reliability through long-life Ready Sensor electrode technology Biosafe automatic sampling system with clot detection and clearance Effortless onboard Automatic Quality Control (AQC) for enhanced quality assurance and regulatory compliance Assays Blood gas: pH, pCO2, pO2 Electrolytes: Na+, K+, Ca++, CI- Metabolites: Glucose, Lactate CO-oximetry: tHb, HHb, O2Hb, sO2, COHb, MetHb, Neonatal Total Bilirubin Dimensions (WxHxD): 584 x 572 x 559 mm Weight: 29.5 kg

Scie-Plas GLE-UVSC UV Sterilisation Cabinet / Workstation This item was removed from a university la (more)boratory where it was surplus to requirements. The cabinet powers on, with both UV and white lights functioning. The UV light automatically switches off when the cabinet is opened. It is in fair cosmetic condition, with visible stress marks and cracks on the plexiglass as shown. Specifications. - Model: GLE-UVSC - Serial No.: 2567

S+B Plinth cabinet high DT Ice blue 1200

Orbit Marine Tracking Controller AL-7200-3M This was removed from a university lab where it was sur (more)plus to requirements. The unit powers up but does not boot. It just beeps. It is missing the main board. It is in otherwise good cosmetic condition with minor marks but is sold for spares/repairs. Comes with 3 Disks:-Utility Disk 'Dartcom 21'IMU 3D CalibrationOrbit Software Update V2.31

VACUUBRAND ME 4R NT Diaphragm Pump Ultimate Vacuum 100 mbar (75 torr) Maximum Pumping Speed 2.5 cfm (more) at 60Hz Number of Heads/Stages 2/1 Features - Contamination-free pumping, evacuation and compression - High flow rate even near ultimate vacuum - Adjustment of outlet pressure and vacuum level with regulator valves - Very low vibration - Exceptionally long diaphragm life and maintenance-free drive system for low lifetime costs This one-stage diaphragm pump works as a vacuum generator and as well as a compressor. All parts in contact with pumped media are made of aluminum and selected plastics (PTFE diaphragms and valves). They enable a wide range of applications for non-corrosive gases. The inlet and outlet connections of the ME 4R NT are equipped with regulator valves for vacuum and overpressure, respectively. Both the compression pressure and vacuum level can be adjusted. Inlet vacuum level and outlet pressure are indicated by manometers. This one-stage diaphragm pump is an excellent choice for continuous, oil-free pumping and evacuation of non-corrosive gases and also for compression. Typical applications are vacuum ovens, pressure and vacuum filtrations and generation of compressed, absolutely oil-free air. Inlet- and outlet pressure can be adjusted continuously using the regulator valves. The manometers on inlet- and outlet side enable easy setting of the desired vacuum and pressure levels.INCLUDED: The VACUUBRAND ME 4R NT Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

M1 Mass Standard - knob weights. Nominal value - 500 kg.

If you buy a Multifunctional Scale HY10 by July 31, 2024, you will receive each of these products al (more)ong with a FREE lifetime license for the Workflow Module. Multifunctional scales HY10 series is designed to fast and precise determination of mass in industrial conditions. The HY10 scales features terminal PUE HY10 series in stainless steel housing and a single load cell weighing platform in mild steel powder coated version. The HY10 series scales features mild steel powder coated construction with stainless steel weighing platform. The terminal PUE HY10 series features a 10,1” colourful touch screen display, keyboard with numeric and function keys. The scales enable cooperating with an additional weighing platforms. Additionally, the HY10 series offers full functionality available in the terminal PUE HY10 series: programmable display and function keys, designing custom printout templates, designing text data indicated on terminal display. Multifunctional scales HY10 series are offered with a terminal connected to a weighing platform through a cable. Scales HY10 series is available in dual range version on surcharge. Dedicated Applications Smart Editor The application is intended for scales equipped with the HY10 terminal. It does not require any additional installations. Enter the terminal’s address in the browser address field and log in. The application enables: - remote databases editing - import of images from the graphic file to the scale - labels import from lb file to the scale - creating and preview of report, e.g. Workflow - dosing processes operation Smart Display The application allows to personalise the scale screen and display it on a computer. The Smart Display enables customization of the display screen in a simple and clear way. Place the individual elements on a grid visible on the screen. These elements can be further scaled to suit user needs. When operated directly on the scale, the user gets a new, refreshed look with the possibility of any configuration of the home screen. If the application is operated via a computer browser, it enables remote control of the desktop or setting larger mass indication window. The Workflow Module will improve work in your company. It enables developing a path of customized weighing process adapted to individual requirements of a particular production system, and next sending it to all weighing instruments cooperating with the E2R. The given process is started on the weighing instrument upon operator logging or after selecting a product, a formulation or an ingredient to which it is assigned. Modifications are made with use of convenient and intuitive interface.