Siemens CA-7000 Coagulation Analyzer

This listing is for a Sysmex CA-50 Automated blood coagulation analyzer The CA 50 has 4-detector cha (more)nnel allowing random analysis of up to four different parameters in single or duplicate mode, providing convenience in coagulation screening. Reagent consumption is half of the manual method.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

ACL 100 coagulation analyzer developed by Instrumentation Laboratory (IL) is aimed to provide optimu (more)m efficiency for performing coagulation testing at health care centers, physicians’ offices, and small laboratories. The latest advancement of IL, the ACL 100 is an ideal choice for low volume workloads and to serve as a backup analyzer. It is a fully automated clot end point analyzer with a processing throughput of 110 tests per hour for PT and Fibrinogen. With the use of this system, you can yield quantitative clottable Fibrinogen result with every PT automatically, without any need for additional steps or reagents. This system is also effective to perform clotting assays such as Lupus and APCR-V Leiden. It offers the convenience of attaining dependable and reliable results for test such as PT-fibrinogen, APTT, TT, Protein C and Protein S assays, and factor assays. Samples can be analyzed in single, batch, duplicate and single menus, and can produce the results for PT, APTT and fibrinogen on four samples within ten minutes, allowing up to 24 test results as well as another 32 optional calculations. Besides these, there are other benefits such as minimum maintenance requirements, convenience, and keyboard for simple patient identification data entry etc.

4 measuring channels Weight: 6.3 kg Dimensions (wxhxd): 35.5 x 12 x 45 cm 220-240V, 50-60 Hz, 45 VA, (more) 0.4 Med 6 V See documentation for more information.

pH controller for the Electrolab FerMac 200 fermentation system. The FerMac 260 features a high impe (more)dance integrated amplifier to ensure accurate pH measurement and to accommodate a wide variety of pH electrodes. The pH controller uses industry standard peristaltic pumps.

Dimensions (WxDxH): 600 x 480 x 700 mm

Job Lot of 34 Hollow Cathode Lamps This was removed from a university lab where it was surplus to re (more)quirements. These have all been tested by a manufacturer trained engineer using a Varian SpectrAA Atomic Absorption Spectrometer  Model - 220FS)) and these are the results for that (no further test have been done): Photron Hollow Cathode Lamp - Element: Na, Sodium (PN-P852) SN-4589.  Working Visimax I Hollow Cathode Lamp - Element: Zn (Cat no-62311). WorkingVisimax I Hollow Cathode Lamp - Element: Yb (Cat no-062983-00). Working Instrument Laboratory Hollow Cathode Lamp - Element: Chromium Cr. (Cat no-89211). WorkingInstrument Laboratory Hollow Cathode Lamp - Element: Cobalt, Co (Cat no-89212).   WorkingInstrument Laboratory Hollow Cathode Lamp - Element: Selenium, Se (Cat no-89249). WorkingInstrument Laboratory Hollow Cathode Lamp - Element: Magnesium, Mg (Cat no-89230). not WorkingInstrument Laboratory Hollow Cathode Lamp - Element: Maganese, Mn (Cat no-89231). Working Philips Data Coded Hollow Cathode Lamp - Element: Sn (PN-9423 390 30501) SN - 37957.  WorkingPhilips Data Coded Hollow Cathode Lamp - Element: Ca-Mg (PN-9423 393 31011) SN - 38083.   Not testedPhilips Data Coded Hollow Cathode Lamp - Element: Hg (PN-9423 390 30801) SN - 37374.    WorkingPhilips Data Coded Hollow Cathode Lamp - Element: Na (PN-9423 390 30111) SN - 28829.  WorkingPhilips Data Coded Hollow Cathode Lamp - Element: Pb (PN-9423 390 30821) SN - 37759.  WorkingPhilips Data Coded Hollow Cathode Lamp - Element: Cd (PN-9423 390 30481) SN - 37280.   WorkingPhilips Data Coded Hollow Cathode Lamp - Element: D2 (PN-9423 390 30011) SN - 35732.   not tested Activon Hollow Cathode Lamp - Element: Calcium, Ca (SN-27775).       not WorkingActivon Hollow Cathode Lamp - Element: Molybdenum, Mo (SN-6603).  WorkingActivon Hollow Cathode Lamp - Element: Titanium, Ti (SN-5998).  not tested Cathodeon Hollow Cathode Lamp - Element: Cr (PN-3UNX/Cr) SN - 39998.  WorkingCathodeon Hollow Cathode Lamp - Element: Ca (PN-3UNX/Ca) SN - 70591.  WorkingCathodeon Hollow Cathode Lamp - Element: Fe (PN-3QNY/Fe) SN - 40895.  Working SIP Analytical Hollow Cathode Lamp - Element: Cd (Cat no-FL2176) Lamp no.20065 NOT WORKINGSIP Analytical Hollow Cathode Lamp - Element: Pb (Cat no-FL2172) Lamp no.20008 WorkingSIP Analytical Hollow Cathode Lamp - Element: Ni (Cat no-FL2155) Lamp no.20081.  WorkingSIP Analytical Hollow Cathode Lamp - Element: H2 (Cat no-FL2159) Lamp no.20098. not tested S&J Juniper Hollow Cathode Lamp - Element: Magnesium, Mg (Cat no-4132) SN-517009. WorkingS&J Juniper Hollow Cathode Lamp - Element: Boron, B (SN-88541).   WorkingS&J Juniper Hollow Cathode Lamp - Element: Cadium, Cd (Cat no-4108) SN-514357.   WorkingS&J Juniper Hollow Cathode Lamp - Element: Lead, Pb (Cat no-4129V) SN-2936V. WorkingS&J Juniper Hollow Cathode Lamp - Element: Aluminium (SN-88765).  WorkingS&J Juniper Hollow Cathode Lamp - Element: Copper, Cu (Cat no-4114V) SN-3325.  WorkingS&J Juniper Hollow Cathode Lamp - Element: Cu/Zn (Cat no-4289V) SN-3144V.  WorkingS&J Juniper Hollow Cathode Lamp - Element: Molybdenum, Mo (Cat no-4135) SN-513155.   WorkingS&J Juniper Hollow Cathode Lamp - Element: Molybdenum, Mo (SN-88612).  Working

CEM Discover Explorer Microwave Reactor Sythesiser  SP-1271A This was removed from a universit (more)y lab where it was surplus to requirements. The unit is in full working order. It was serviced 5 years ago, but then not used since. The software is installed on a Dell Optiplex 380 with monitor, mouse & keyboard.A fresh copy of Windows XP has been installed and the PC is running ChemDriver 3.5.4 software. The software discs are included with the system. The unit appears to communicate with the PC although it does show an error.The main unit shows a Power supply error after running a program for a few minutes.The software shows: Number: 8198 Routine: Heat Sink Temp. We think this may just be user error. It is in good cosmetic condition with marks from use.

Polyscience 6860T56A270D Durachill Chiller with Turbine Pump, Air-Cooled, 5° - 35°C, 5200W, 230V 60H (more)zDuraChill Chillers provide cooling power for demanding applications and serve as an economical alternative to tap water cooling systems. All models feature a microprocessor-based controller, digital Temperature Display (°C or °F), one-touch set point display, and digital Pressure/Flow Rate Display (PSI, kPa, GPM, LPM) with push-Button selection. To optimize cooling efficiency and performance, these sophisticated Chillers also feature a modulated refrigeration system. As a result, temperature stability is greatly enhanced and compressor life extended.Features High capacity cooling for lasers, electron microscopes, and other laboratory applications Small footprint conserves floor space Displays temperature and pressure or flow rate simultaneously User-adjustable temperature, pressure, and flow rate alarms Simple operation and maintenance Air- or water-cooled Positive displacement (PD) or turbine (T) pump; other pump options also available INCLUDED: The Polyscience 6860T56A270D Durachill Chiller with Turbine Pump, Air-Cooled, 5° - 35°C, 5200W, 230V 60Hz includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Labconco RapidVapVacuum EvaporationAdvanced vacuum function Microprocessor controls vacuum at pr (more)eset level; Automatic vacuum release if power fails LCD shows vacuum level from 0 to 999mbar Rear-mounted vacuum connections: vacuum port, tubing clamps, lid heater receptacle, 30 in.L (76cm) 0.5 in. I.D. tubing for connection to accessory vacuum pump Safety features Lexan™ shield on clear glass lid protects against glass implosion Dual lid clamps hold lid securely in place for vacuum-tight seal Phenol-free gasket provides complete sealing under vacuum PTFE-coated aluminum chamber Audible/visual alarm for end point detected by temperature sensors at heater and block Optional Lid Heater 40w heater plugs into electrical receptacle on rear Eliminates fogging, increases visibility when evaporating water or other high-boiling-point solvents Improved control panel Easy-to-read LCD display prompts operator to program desired parameters, and displays vortex speed by percentage, actual and set temperatures in C, and total time remaining in minutes. Enter up to nine different protocols into memory for easy repetition of exact test parameters Advanced heating system Contamination- and maintenance-free 1000-watt dry block heating system speeds evaporation rate by supplying a controlled amount of heat from ambient up to 100C Heater and sample block move in tandem for more efficient heat transfer Alarm signals completion of run, allowing samples to be left unattended while evaporating to desired endpoint Efficient operation Brushless DC motor ensures safe, maintenance-free operation and provides smooth, variable-speed power up to 1000rpm Produces no potentially dangerous sparks Increased durability Systems may be used with broad range of strong chemicals Powder-coated, aluminum cabinet base with smooth, solvent-resistant acrylic/PVC thermoplastic upper housing Aluminum chamber with PTFE coating conducts heat efficiently and resists corrosion All mechanical components are isolated from chemical fumes and vapors for longer life Chemical-resistant glass lid provides visibility of samples and detaches for cleaning Two clamps hold lid securely in place Phenol-free gasket provides sealing without potential for phenol contamination RapidVap models with optional RS-232 link allow all front panel functions to be performed and monitored from a personal computer (not included) INCLUDED: The Labconco 7900000 RapidVapVacuum Evaporation, 115V, 60Hz includes: - Vacuum Hose - Clamps x 2 - Heat Transfer Grease - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty