Benchmark BSWBCT Block, Blood Collection tubes, 12 x 13mm and 8 x 16mm

SIEMENS RapidLab 1245 Electrolyte and blood gas analyzer for parts Model: RapidLab 1245 For parts, d (more)oes not work

The XN-2000 system is a combination of two analysis modules that can be used in clinical application (more)s specified in the specifications. The Rerun & Reflex configuration transforms the system into a superior solution for basic and comprehensive lab research. Because both modules process sample racks simultaneously, the system can handle any sample without any delay. The modules work perfectly together. And you don’t waste precious time even with abnormal samples. With integrated reflex measurement, you no longer have to manually select and reload samples. The reflex sampler automatically feeds the samples into the left module and performs the extended measurement. If there are no abnormal samples in the run, the system speeds up operation by processing standard samples only. Having two modules running at the same time means that you have more certainty about daily routines, because you always have an integrated backup solution at your disposal. To extend the reach of your laboratories, network your XN-2000 with other XNs to create multi-location installations. This way you can link specialized and central laboratories and upgrade the quality of your service. And thanks to our remote service, we can jointly define the level of support quality and guaranteed service response time, and ensure maximum system uptime. Principles and Technology: Fluorescent flow cytometry using a semi-conductor laser and hydrodynamic focusing in dedicated channels Parameters whole blood: WBC; RBC; HGB; HCT; MCV; MCH; MCHC; PLT (PLT-I, PLT-F); NEUT#, NEUT%; IG#, IG%; LYMPH#,LYMPH%; MONO#, MONO%; EO#, EO%; BASO#, BASO%; NRBC#, NRBC%; RDW-SD; RDW-CV;MPV; RET#, RET%; IRF, RET-He; IPF#, IPF% Parameters blood bank mode: WBC, RBC, HGB, HCT, PLT Capacity: Bidirectional, continuous-feed sampler holds up to 50 samples (5 X 10-tube rack) Throughput whole blood mode: 100 samples/hour/unit Throughput blood bank mode: RBC component – 79 samples/hour without WBC; 33 samples/hour with WBC PLT component – 62 samples/hour without WBC; 19 samples/hour with WBC Sample aspiration volume: Whole Blood mode: 88 µL, RBC Pack measurement: 150 µL, PLT Pack measurement: 205 µL, Pre-dilute Mode: 70 μL Quality Control: XN CHECK: complete tri-level QC product for all CBC, Diff, RET and PLT parameters Platelet CHECK: bi-level QC product for Blood Bank mode Comprehensive QC files including current and new lot feature 99 total files including 5 X-barM files Including software

Motic BA310 MET-T Trinocular (Stroke 3”x 2” Stage) Motic’s BA310MET series presents a powerful micro (more)scope line for incident light applications in all material sciences. Industrial quality control of opaque samples can be performed as well as teaching in educational environments of engineering and material professions, where affordability and ease of use are key demands. Extended flexibility is given by the BA310MET-T models with built-in transmitted light for transparent or compound materials. The BA310MET-H includes a more flexible focusing device, dedicated to larger samples with little limitation in size. Motic's LM Plan-Achromatic objectives with Long-Working Distance for incident light provide optimal image contrast for reflective, non-covered specimen. Together with a fully corrected tube lens an intermediate image without colored fringes is created. In all models the Epi-Illuminator offers a powerful 50W Halogen light source. The built-in field diaphragm and aperture diaphragm help to optimize image quality by reducing stray light and thus increasing contrast.INCLUDED: The Motic BA310 MET-T Trinocular (Stroke 3”x 2” Stage) includes: - 5X/0.13 (WD 20.3mm) Objective - 10X/0.25 (WD 17.5mm) Objective - 20X/0.40 (WD 8.1mm) Objective - 50X/0.55 (WD 8.4mm) Objective - Widefield N-WF10X/20mm with Diopter Adjustment - Dust Cover - Power Cord - Allen Key - Blue, Frosted, Green and Yellow Filters - Operator's Guide Motic BA310 MET-T Trinocular (Stroke 3”x 2” Stage) SpecificationsOptical systemColour Corrected Infinity Optical System (CCIS®)Observation tubeTrinocular head, Siedentopf type, 360° SwivelingInclination30° inclinedTrinocular light split100:0/20:80Interpupillary distance48-75mmDiopter adjustmentOn both eyepieces, +/- 5 diopterEyepiecesWidefield N-WF10X/20mm with diopter adjustmentIntermediate bodyEpi-illuminator quartz halogen with integrated field and aperture diaphragms and external lamphouseNosepieceReversed quintupleObjective classificationCCIS® LM Plan Achromatic, DINObjectives5X/0.13 (WD 20.3mm), 10X/0.25 (WD 17.5mm), 20X/0.40 (WD 8.1mm), 50X/0.55 (WD 8.4mm)Objective mounting threadW 4/5"x1/36" (RMS standard)Stand typeUprightStageMechanical stage, hard coated with built-in low position coaxial stage control and glass plateStage size240x140mmTravel range X&Y75x50mm (3"x2")CondenserFocusable and centerable Abbe condenser N.A. 0.85DiaphragmIris diaphragmFocus mechanismCoaxial coarse and fine focusing system with tension adjustmentFine focus precision2μmFocusing stroke30mmUpper limit stopUpper limit stop preset but adjustableFilter holderOn top of the illuminator with fixing capIncident illuminationQuartz halogen 12V/50W with integrated field and aperture diaphragmsTransmitted illuminationKoehler Quartz halogen 6V/30W with intensity controlIllumination interchangeabilityEpi-illuminator Quartz halogen 12V/50W or LED 3W, transmitted Quartz halogen 6V/30W or LED 3WIllumination featuresExternal lamp house for Epi-illuminatorTransformerEpi-illuminator external, transmitted internalPower supply100-240V (CE)Dimensions LxWxH508x240x465mmNet weight12.7kgComparison of ModelsSpecificationMotic BA310 MET BinocularMotic BA310 MET TrinocularMotic BA310 MET-H TrinocularMotic BA310 MET-H Trinocular (Erect Image)Motic BA310 MET-T Trinocular (3"x2" Stage)Motic BA310 MET-T Trinocular (6"x4" Stage)Motic BA310 MET-T Trinocular (Erect Image)Motic BA310 MET-T Trinocular (Stroke 3”x 2” Stage) (Erect Image)Observation TubeBinocular headTrinocular headTrinocular headTrinocular head (Erect Image)Trinocular head, Siedentopf type, 360° SwivelingTrinocular head, Siedentopf type, 360° SwivelingTrinocular head, Siedentopf type, 360° SwivelingTrinocular head, Siedentopf type, 360° SwivelingInterpupillary Distance48-75mm48-75mm55-75mm55-75mm48-75mm48-75mm48-75mm48-75mmObjective ClassificationCCIS® EC Plan Achromatic, DINCCIS® EC Plan Achromatic, DINCCIS® LM Plan Achromatic, DINCCIS® LM Plan Achromatic, DINCCIS® LM Plan Achromatic, DINCCIS® LM Plan Achromatic, DINCCIS® EC Plan Achromatic, DINCCIS® LM Plan Achromatic, DINObjectives5X/0.13 (WD 20.3mm), 10X/0.25 (WD 17.5mm), 20X/0.40 (WD 8.1mm), 50X/0.55 (WD 8.4mm)5X/0.13 (WD 20.3mm), 10X/0.25 (WD 17.5mm), 20X/0.40 (WD 8.1mm), 50X/0.55 (WD 8.4mm)5X/0.13 (WD 11.5mm), 10X/0.3 (WD 6.8mm), 20X/0.40 (WD 11.1mm), 50X/0.55 (WD 8.2mm)5X/0.13 (WD 20.3mm), 10X/0.25 (WD 17.5mm), 20X/0.40 (WD 8.1mm), 50X/0.55 (WD 8.4mm)5X/0.13 (WD 20.3mm), 10X/0.25 (WD 17.5mm), 20X/0.40 (WD 8.1mm), 50X/0.55 (WD 8.4mm)5X/0.13 (WD 20.3mm), 10X/0.25 (WD 17.5mm), 20X/0.40 (WD 8.1mm), 50X/0.55 (WD 8.4mm)5X/0.13 (WD 20.3mm), 10X/0.25 (WD 17.5mm), 20X/0.40 (WD 8.1mm), 50X/0.55 (WD 8.4mm)5X/0.13 (WD 20.3mm), 10X/0.25 (WD 17.5mm), 20X/0.40 (WD 8.1mm), 50X/0.55 (WD 8.4mm)StageMechanical stage, hard coated with coaxial stage controlMechanical stage, hard coated with coaxial stage controlMechanical stage, hard coated with coaxial stage controlMechanical stage, hard coated with coaxial stage controlMechanical stage, hard coated with built-in low position coaxial stage control and glass plateMechanical stage, hard coated with built-in low position coaxial stage control and glass plateMechanical stage, hard coated with built-in low position coaxial stage controlMechanical stage, hard coated with built-in low position coaxial stage control and glass plateStage Size180x140mm180x140mm180x140mm180x140mm240x140mm300x180mm180x140mm240x140mmTravel Range X&Y75x50mm75x50mm100x80mm100x80mm75x50mm150x100mm75x50mm75x50mmIllumination InterchangeabilityQuartz halogen 12V/50W or LED 3WQuartz halogen 12V/50W or LED 3WQuartz halogen 12V/50W or LED 3WQuartz halogen 12V/50W or LED 3WEpi-illuminator Quartz halogen 12V/50W or LED 3W, transmitted Quartz halogen 6V/30W or LED 3WEpi-illuminator Quartz halogen 12V/50W or LED 3W, transmitted Quartz halogen 6V/30W or LED 3WQuartz halogen 12V/50W or LED 3WEpi-illuminator Quartz halogen 12V/50W or LED 3W, transmitted Quartz halogen 6V/30W or LED 3W.comparison-table tr td:nth-child(6) { background-color: #fffacd; }DownloadsTechnical Specification Download Operator's Manual Download

KNF SIMDOS 10 IP65 UFEM 1.10 ST.18RC2 Diaphragm Liquid Dosing Pump Flow Rate Range 1 to 100 ml/min  (more)Programmable Dosing 1 to 999 ml Maximum Suction Height 3 mWg Features - Small footprint - Simple, intuitive operation - Manual, analog control - Self-priming, can run dry - Consistent, reliable flow rate - Simple calibration - Adaptable to fluid characteristics The KNF SIMDOS 10 IP65 UFEM 1.10 ST.18RC2 Diaphragm Liquid Dosing Pump is a liquid dosing/metering diaphragm pump. Offers wetted material combinations for optimal chemical resistance. Manual control of flow rate and dosing volume with LCD graphic display. INCLUDED: The KNF SIMDOS 10 IP65 UFEM 1.10 ST.18RC2 Diaphragm Liquid Dosing Pump includes: - Connection Kit (Hose and Screw-in Fittings) - Remote Control Cable - Filter - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Hermle 50ml Insert (2pk) The Hermle 50ml Inserts are for use with the 6 x 85ml Rotor for the Z326 an (more)d Z326 K centrifuges. INCLUDED: The Hermle 50ml Insert (2pk) includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Branson SFX150 Sonifier w/ Handheld ConverterFeatures - 40 kHz ultrasonics for quiet tabletop operat (more)ion. - Sample sizes from 0.2 to 150 mL. - High-efficiency, handheld and stand-mountable converters require no internal cooling. - Scrollable, multifunction screen with pushbuttons. - Continuous or pulsed ultrasonics. - Amplitude control range from 10 to 100%. - Microtip mode limits amplitude to 70% to extend tool life. - Control modes include time, temperature, and energy. - Advanced energy control mode delivers precise energy input in continuous or pulse modes. The fully digital control screen allows the user to quickly and effortlessly select control settings, power level, and sonification duration. The Branson SFX sonifer gives users ultimate control with an amplitute range of 10 to 100% along with continous or pulsed ultrasonics. These smaller, highintensity tips are ideal for processingsmaller samples in Eppendorf vialsor similar vessels. Sizes range from3/32" to 1/4". The Sonifier® SFX150 is part of the new lineup of Sonifiers from Branson, designed to bring the industry’s most advanced sample-processing capabilities to your laboratory. Geared toward low-volume samples ranging from 0.2 to 150 mL, the Sonifier SFX150 delivers up to 150 watts of power. And at 40 kHz, it’s quiet enough to operate on a lab bench without a sound enclosure. Because it is available with either a conventional or a handheld converter, you can use the SFX150 in a stack configuration to process longer-duration samples, or process samples quickly by hand using the comfortable, ergonomically-designed handheld converter. In operation, Sonifier SFX Series monitors ongoing processes on a scrollable, digital screen, providing continuous updates of key variables including power level, energy usage, sample temperature, and experiment progress. For assured repeatability and precision on a greater scale, the SFX Series enables users to create and store up to 20 sample processing programs. Program parameters include continuous or pulsed ultrasonics; time, energy, or temperature control modes; pulse on-time/energy, off-time and total on-time/energy; or amplitude as a percentage. Sonifier® SFX150 Cell Disruptors and Homogenizers Branson’s exclusive handheld converter is designed with the user in mind. The handheld converter offers an ergonomic grip for comfort and control, and a recessed pushbutton and LED indicator for assured operation. In Energy Mode, the SFX Series power supply manages the processing cycle to deliver a precise, user-determined input of ultrasonic energy (measured in joules), either continuously or in individual pulses. The SFX Series automatically compensates for any variability, extending or shortening the cycle as needed to deliver the precise energy output. Click Here to View Product Video INCLUDED: The Branson SFX150 Sonifier w/ Handheld Converter includes: - 40 kHz Handheld Converter - 1/8" Microtip - Power Cord - Operator's Manual - 1 Year Manufacturer's Warranty

Dimensions (WxHxD): 600 x 600 x 580 mm

Samples and applications - Preparation of foamy mixtures (ice cream, butter, margarine, icing) and s (more)preadable creams    - Preparation of tablet coatings - Preparation of ointments and pharmaceutical creams - Preparation of cosmetics (lip balm, soap, shampoo, conditioner, creams, lipstick, mascara) - Preparation of pigments, inks and paints - Preparation of biodiesel - Dispersion of petroleum derivatives (e.g. asphalt) TECHNICAL DATA - Rotor diameter: 18 mm - Stator diameter: 25 mm - Stator/rotor gap: 0.5 mm - Volume (H2O): 100 - 2,500 ml - Immersion depth: 40-175 mm - Max. speed: 25,000 rpm - Max. circumferential speed: 23.6 m/s - Ultimate fineness, emulsions: 1-5 µm - Ultimate fineness, suspensions: 5-25 µm - Max. allowable working temperature: 180 °C - Materials in contact with the medium: AISI 316L, PTFE - Suitable for solvents: Yes - Sterilization and cleaning methods: it is possible to sterilize all the components of the dispersing tool in different ways according to the construction materials and the sample processed