LAUDA Proline PBD C heating thermostat

Heating thermostat from 20 to 200°C, with LCD display and simple programming functions LAUDA ECO sta (more)nds out for its range of features and ease of use. ECO thermostats are available in Silver (LCD display; simple programming) and Gold (TFT color display; complex programming) models, equipped with a mini USB interface as standard. A LAUDA innovation is the pressure flow controller located on the front of the head. This means that flow regulation between inside and outside is possible even during operation. - Monochrome LCD graphic display for simultaneous indication of actual and set values - The circulation pump can be adjusted to six levels - Integrated programmer: 1 program with max. 20 segments - Fully electronic continuous regulator with PID action - Additional key Tmax for overtemperature protection - The ECO heating thermostat line includes transparent baths up to 100°C and stainless steel up to 200°C - The most powerful units are equipped with the energy-saving LAUDA SmartCool system - Variants in 230V; the 50 Hz are also available with natural refrigerants - Convenient operation with softkey cursor - Safety class III for operation with flammable and non-flammable liquids. - mini-USB interface - Pump connections with 13mm plastic nipples as standard LAUDA tank thermostats are equipped as standard with a cooling coil. The E 4 model is also equipped with a lid for the bowl and connections for external applications. A drain cock on the rear side makes changing the heat transfer liquid easy and safe. Heating performance graph of ECO Silver immersion thermostats with stainless steel tank. Performance graph of the pump pressing on the six levels. TECHNICAL VISUALIZATION Display 1 - Status display 2 - Display of the internal or external temperature value (T-int or T-ext) 3 - Soft-key bar Control panel 4 - Soft keys, left and right 5 - Enter key 6 - Cursor keys for Up, Down, Left and Right. 7 - T max key: display and adjustment of the overtemperature switch-off point 1 - USB interface 2 - Upper module receptacle approx. 51 mm x 27 mm for analog, RS 232/485 module, Profibus module and contact module 3 - Lower module receptacle approx. 51 mm x 17 mm for Pt100/LiBus module 4 - Connection socket 75S for control cable of cooling underpart for RE 1050 S 5 - Rating label 6 - Connection socket 51H for power supply between the control head and cooling underpart 7 - Mains connecting lead 1 - Cooling coil connections 2 - Pump connection: outflow and return (as standard only with E 4 S and ET 15 S) 3 - Four feet 1 - Mains connecting lead 2 - Rating label 3 - Bath draining tap 4 - Bath drain point

Heating thermostat from 20 to 200°C, with LCD display and simple programming functions LAUDA ECO sta (more)nds out for its range of features and ease of use. ECO thermostats are available in Silver (LCD display; simple programming) and Gold (TFT color display; complex programming) models, equipped with a mini USB interface as standard. A LAUDA innovation is the pressure flow controller located on the front of the head. This means that flow regulation between inside and outside is possible even during operation. - Monochrome LCD graphic display for simultaneous indication of actual and set values - The circulation pump can be adjusted to six levels - Integrated programmer: 1 program with max. 20 segments - Fully electronic continuous regulator with PID action - Additional key Tmax for overtemperature protection - The ECO heating thermostat line includes transparent baths up to 100°C and stainless steel up to 200°C - The most powerful units are equipped with the energy-saving LAUDA SmartCool system - Variants in 230V; the 50 Hz are also available with natural refrigerants - Convenient operation with softkey cursor - Safety class III for operation with flammable and non-flammable liquids. - mini-USB interface - Pump connections with 13mm plastic nipples as standard LAUDA tank thermostats are equipped as standard with a cooling coil. The E 4 model is also equipped with a lid for the bowl and connections for external applications. A drain cock on the rear side makes changing the heat transfer liquid easy and safe. Grafico delle prestazioni di riscaldamento dei termostati di immersione ECO Silver con vasca in acciaio inox. Performance graph of the pump pressing on the six levels. TECHNICAL VISUALIZATION Display 1 - Status display 2 - Display of the internal or external temperature value (T-int or T-ext) 3 - Soft-key bar Control panel 4 - Soft keys, left and right 5 - Enter key 6 - Cursor keys for Up, Down, Left and Right. 7 - T max key: display and adjustment of the overtemperature switch-off point 1 - USB interface 2 - Upper module receptacle approx. 51 mm x 27 mm for analog, RS 232/485 module, Profibus module and contact module 3 - Lower module receptacle approx. 51 mm x 17 mm for Pt100/LiBus module 4 - Connection socket 75S for control cable of cooling underpart for RE 1050 S 5 - Rating label 6 - Connection socket 51H for power supply between the control head and cooling underpart 7 - Mains connecting lead 1 - Cooling coil connections 2 - Pump connection: outflow and return (as standard only with E 4 S and ET 15 S) 3 - Four feet 1 - Mains connecting lead 2 - Rating label 3 - Bath draining tap 4 - Bath drain point

VELP FOC 250I Refrigerated Thermostat Incubator / Drying Oven Total volume: 225 litres FOC225I Usefu (more)l internal volume: 196 litres Temperature range: 3.0 to 50.0 ° C Internal temperature indicated by a display Temperature resolution: 0.1 ° C Electronic thermoregulation system: AUTO-TUNING 2 internal electrical outlets Number of shelves included: 4 Power: 350W Weight: 40 kg Dimension (WxHxD): 540x1300x560mm (21.6x23.2x23in) With internal glass port Continuous ventilation and the Auto-Tuning thermoregulation system ensure temperature uniformity throughout the chamber. The temperature can be set from 3 to 50 °C, the reading on the display refers to the actual internal temperature. The FOC 225I is equipped with two internal sockets controlled by an external switch

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Proline heating thermostat with tank Proline clear-view LAUDA thermostats have been designed for dir (more)ect observation of objects. They are ideal for use with LAUDA Scientific PVS or iVisc automatic viscometer, as the necessary temperature stability for precise viscosity determination is ensured over the entire temperature range. In addition, the two-chamber principle always guarantees a constant liquid level in the measuring chamber, regardless of the volume and temperature of the medium. PVL models with five layers of insulating glass are suitable for low temperature measurements down to -40° or -60°C when a low temperature chiller or thermostat is connected. These thermostats are available with two different control units. The Master version is designed for all applications where the parameters are not changed very often. The removable Command operating unit (PV C models) incorporates a graphic LCD screen for high operating convenience and a programmer. Notable features - LAUDA Vario Flex pump (pressure pump) with eight selectable power levels - Cooling coil fitted as standard with connection for additional cooler Accessories included Fittings for pump connection, cooling coil Specific features of the Proline PV 24 model - Tank volume min. 19 L - Tank volume max. 24 L - Tank opening 405 x 135 mm - Bowl depth 320 mm - Usable depth 285 mm - Upper height of the tank 390 mm - Master control panel; calibration point, timer, under / over temperature alarms, digital indicators - Pump pressure mx. 1.1 bar - Water-cooled temperature range from 20°C to 230°C - Operating temperature range from -60°C to 100°C - Pump connectors M16 x 1 - Fitting 13 Ø

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

S+B Sink Ice Blue 600

This was removed from a university lab where it was surplus to requirements The unit powers up and w (more)orks but has a faulty CO2 sensor. It is sold for spares/repairs.

Yamato CA-301-115V Cold Trap 4L, 115V Refrigerant R404A Max Low Temperature -45°C Internal Capacity (more) Approx. 4 L Features - Excellent choice to extract acid and organic solvents with the optional glass condenser - Efficiently reduces vapor inhalation amount to the vacuum pump - Can be used as a low temperature tank as well as pre-cooling tank - Utilizes R404A and mixed coolants - Space saving and highly mobile on wheels 4L cold trap that efficiently traps water vapor and toxic substances discharged from vacuum oven and rotary evaporator to protect vacuum pump. Excellent choice to extract acid and organic solvents with the optional glass condenser. Efficiently reduces vapor inhalation amount to the vacuum pump. Can be used as a low temperature tank as well as pre-cooling tank. Utilizes R600a and mixed coolants. Space saving and highly mobile on wheels. Max. low temp -45°C. Dehumidifying capacity max 0.9 kg.INCLUDED: The Yamato CA-301-115V Cold Trap 4L, 115V includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Gilson FC204 Fraction Collector, 200mL/min, 110/220VFeatures - Collect fractions by time, drop, or p (more)eak to suit all your LC applications - Choose the compact FC 203B for small-capacity collection or the FC 204 for large volumes and capacities - Accept a wide variety of collection vessels, including microplates, microvials, and tubes - In peak mode, collectors monitor a detector signal and identify peaks using either an adaptive-slope algorithm or a specified millivolt threshold - Up to 10 programmable time windows can be added for collecting only what you want, while discarding the column’s void volume, peaks of no interest, and equilibration volumes - Operate as stand-alone instruments with an easy-to-use keypad, or can be controlled through your PC via TRILUTION® LC Software The FC 204 Fraction Collector is the perfect solution for collecting fractions in liquid chromatography systems, catering to a wide range of flow rates from analytical to preparative. Paired with a peristaltic pump, it provides a cost-effective and easy-to-install tubing filling system, making it suitable for biosafety cabinets. With its small footprint and sterilizable flow path, contamination risks are minimized. This collector holds up to four racks, accommodating various sample formats, including up to 240 fractions in 13x100mm tubes or up to eight shallow or deep-well microplates. Choose between models with a 3-way diverter valve for flow rates up to 20 mL/min or 200 mL/min, depending on your requirements. For enhanced efficiency, an optional multicolumn adapter allows for simultaneous collection from up to 18 separate channels. INCLUDED: Gilson FC204 Fraction Collector, 200mL/min, 110/220V includes: - Gilson FC204 Fraction Collector - User's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Eppendorf S-4xUniversal Rotor with 1000ml Universal Buckets The Eppendorf S-4xUniversal Rotor with 1 (more)000ml Universal Buckets, (Catalog #: 5895190006) accommodates a capacity of up to 4 x 1000ml. This rotor can reach speeds up to 4,500 RPM with a maximum RCF of 4,347 x g. This Eppendorf S-4xUniversal Swing Bucket Rotor is for use with the Eppendorf 5910R Refrigerated Centrifuge and Eppendorf 5910 Ri Refrigerated Centrifuge. (Please Note: The adapters pictured above are NOT INCLUDED. Please inquire if you may require adapters). INCLUDED: The Eppendorf S-4xUniversal Rotor with 1000ml Universal Buckets includes: - S-4xUniversal Swing Bucket Rotor - 4 x 1000ml Universal Buckets - Full 1 Year Parts and Labor Warranty Eppendorf S-4xUniversal Rotor with 1000ml Universal Buckets SpecificationsMaximum Speed4,500 RPMMaximum RCF4,347 x gMaximum Capacity4 x 1000mlRadius19.2 cmCentrifuge CompatibilityEppendorf 5910R & 5910 Ri CentrifugesDownloadsTechnical Specification Download Request a Formal Quote .downloads-section { justify-content: center; }