LAUDA ECO ET 12 G heating thermostat

Heating thermostat from 20 to 200°C, with TFT color display and complete programming functions LAUDA (more) ECO stands out for its range of features and ease of use. ECO thermostats are available in Silver (LCD display; simple programming) and Gold (TFT color display; complex programming) models, equipped with a mini USB interface as standard. A LAUDA innovation is the pressure flow controller located on the front of the head. This means that flow regulation between inside and outside is possible even during operation. - The circulation pump can be adjusted to six levels - Programmer with 150 temperature/time segments separable into 5 programs - Fully electronic continuous regulator with PID action - Additional key Tmax for overtemperature protection - The ECO heating thermostat line includes transparent baths up to 100°C and stainless steel up to 200°C - The most powerful units are equipped with the energy-saving LAUDA SmartCool system - Variants in 230V; the 50 Hz are also available with natural refrigerants - Temperature graphs on display - Convenient operation with softkey cursor - Safety class III for operation with flammable and non-flammable liquids. - mini-USB interface LAUDA tank thermostats are equipped as standard with a cooling coil. The E 4 model is also equipped with a lid for the bowl and connections for external applications. A drain cock on the rear side makes changing the heat transfer liquid easy and safe. Heating performance graph of Gold immersion thermostats with stainless steel tank. Performance graph of the pump pressing on the six levels.

Heating thermostat from 20 to 200°C, with TFT color display and complete programming functions LAUDA (more) ECO stands out for its range of features and ease of use. ECO thermostats are available in Silver (LCD display; simple programming) and Gold (TFT color display; complex programming) models, equipped with a mini USB interface as standard. A LAUDA innovation is the pressure flow controller located on the front of the head. This means that flow regulation between inside and outside is possible even during operation. - The circulation pump can be adjusted to six levels - Programmer with 150 temperature/time segments separable into 5 programs - Fully electronic continuous regulator with PID action - Additional key Tmax for overtemperature protection - The ECO heating thermostat line includes transparent baths up to 100°C and stainless steel up to 200°C - The most powerful units are equipped with the energy-saving LAUDA SmartCool system - Variants in 230V; the 50 Hz are also available with natural refrigerants - Temperature graphs on display - Convenient operation with softkey cursor - Safety class III for operation with flammable and non-flammable liquids. - mini-USB interface LAUDA tank thermostats are equipped as standard with a cooling coil. The E 4 model is also equipped with a lid for the bowl and connections for external applications. A drain cock on the rear side makes changing the heat transfer liquid easy and safe. Heating performance graph of Gold immersion thermostats with stainless steel tank. Performance graph of the pump pressing on the six levels.

Heating thermostat from 20 to 100°C, with TFT color display and complete programming functions LAUDA (more) ECO stands out for its range of features and ease of use. ECO thermostats are available in Silver (LCD display; simple programming) and Gold (TFT color display; complex programming) models, equipped with a mini USB interface as standard. A LAUDA innovation is the pressure flow controller located on the front of the head. This means that flow regulation between inside and outside is possible even during operation. - The circulation pump can be adjusted to six levels - Programmer with 150 temperature/time segments separable into 5 programs - Fully electronic continuous regulator with PID action - Additional key Tmax for overtemperature protection - The ECO heating thermostat line includes transparent baths up to 100°C and stainless steel up to 200°C - The most powerful units are equipped with the energy-saving LAUDA SmartCool system - Variants in 230V; the 50 Hz are also available with natural refrigerants - Temperature graphs on display - Convenient operation with softkey cursor - Safety class III for operation with flammable and non-flammable liquids. - mini-USB interface LAUDA tank thermostats are equipped as standard with a cooling coil. A drain cock on the rear side makes changing the heat transfer liquid easy and safe. . Graph of the heating performance of the Silver and Gold thermostats in the models with transparent polycarbonate tank. Performance graph of the pump pressing on the six levels.

Heating thermostat Alpha: from 25 to 100°C LAUDA Alpha is the most affordable choice when it comes t (more)o high quality LAUDA thermostats. These reliable and easy-to-use thermostats, with features reduced to the essentials, can be operated with non-flammable liquids and are suitable for both indoor and outdoor temperature control tasks. The cooling system, the pump circulation set and the bath cover set are available as accessories for all thermostats. With the water cooling system, the thermostat can be used for operations from 20° to 100°C. Low-level and overtemperature protection for operation with non-flammable liquids. Qualitative characteristics - Simple and intuitive menu navigation with three-button operation via a large, clearly legible LED display - Integrated timer function to allow automatic shutdown of the device - Under / over temperature protection for operation with non-flammable liquids The back of the Alpha thermostat: clamp, power supply and reset button. Simple control with three buttons and three indicator lights: active heating, active cooling and alarm light. Can be used with any bath vessel up to 30 mm thick with the included screw clamp. Graph of pump characteristics in Alpha Lauda models. Graph of heating curves of Aplha Lauda models. TECHNICAL VISUALIZATION a - Control head with clamp b - Bath vessel c - Four mounting feet 1 - Temperature controller with four segment LED display 2 - Heater active (yellow LED is lit) Cooler active (blue LED is lit) Error signal (red LED is flashing) 3 - Menu functions, select and Enter keys 4 - Mains switch 5 - Screw clamp 6 - Tubular heater 7 - Temperature probe Pt100 8 - Pump outflow with pump outflow reducer 1 - Reset button (press only if the display shows SAFE ) 2 - Cooler cable 3 - Rating label 4 - Mains cable 5 - Screw clamp

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Yamato CF-303Y Cooling Water Circulator 3.9L, 115V Operating Ambient Temp. Range 5 to 35°C Max. Flo (more)w Rate 10L/min. Refrigerant R452A Features - User-friendly controller with high visibility and improved operability. Possible to switch between measured temperature and set temperature - Convenient circulation pathway connection is completed by inserting a hard tube with 10 mm OD or flexible hose with 9mm ID. Connector can be freely moved and be set in the desired direction - Easy drainage of condensate water via a drain port near the connector on the upper rear of the unit - Easy to clean intake filter located on the front of the unit can be removed when cleaning - Space-saving solvent recovery device stored in the main body as secondary trap (option for CF802A) A powerful 3.9L closed circulation system with excellent cooling capacity designed to work with laboratory equipment such as rotary evaporators. Easy maintenance of air intake filter. Rotatable connector which can freely be moved and be set in the desired orientation. Convenient drainage of waste water. Compact and space-saving to fit on laboratory tables and limited space. Temp. range: -20°C ~ 30°C. INCLUDED: The Yamato CF-303Y Cooling Water Circulator 3.9L, 115V includes: - Condensation drain hose - Hose clamp (2) - Hose nozzle (for flexible hose connection(2) - spare fuse for service outlet 2A (1) for CF802A - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Ohaus FC5515R Frontier Micro Centrifuge The Ohaus FC5515R Frontier Micro Centrifuge is a sophisticat (more)ed, high-performing lab device designed for liquid separation applications. With a sleek, compact design that saves valuable lab space, this micro centrifuge is engineered to provide smooth and dependable high-speed operation for critical lab applications, including DNA/RNA preparation, ultra-filtration, and more.The FC5515R's easy-to-use control panel with a rotary knob allows for simple operations. This includes setting and recalling speed and g-force, as well as controlling the temperature. Its intuitive interface allows for immediate accessibility and adjustment of key parameters, making it one of the most user-friendly centrifuges on the market.Propelling high performance is a powerful brushless induction motor along with 10 acceleration and deceleration settings. Moreover, a memory function for up to 99 commonly used parameters provides convenience and helps streamline the work process.The FC5515R has been designed with multiple safety features to protect against injury. The motorized lid-locking system prevents the centrifuge from opening during operation, and the rotor imbalance sensor stops the centrifuge if the rotors become imbalanced or sudden shock occurs. This acts as a safety measure, protecting the operator from high-speed spinning rotors.Moreover, bio-containment rotors facilitate research involving hazardous samples, thereby adding an extra level of safety and versatility.The Frontier Micro Centrifuge offers flexibility for varied centrifugation needs. It has a maximum capacity of 44 × 1.5/2 mL and 12 × 5 mL tubes, and it's the only centrifuge in its class compatible with 6 rotors (7 rotors for the 5515 model), including a PCR strip tube rotor. It's the most economical centrifuge on the market to include a unique 5 mL tube rotor. The centrifuge's signature snap-on rotor and lid locking system allow for quick and easy installation of rotors with just one press of a button.In conclusion, the Ohaus FC5515R Frontier Micro Centrifuge offers exceptional performance, versatility, safety, and user-friendliness. It's an excellent choice for labs requiring high-speed, reliable centrifugation.Click Here to View Product Video INCLUDED: The Ohaus FC5515R Frontier Micro Centrifuge includes: - Power Cord - Two Year Manufacturer's Warranty

Temperature range: 0°C to 50°C Dimensions (HxWxD): 1110 x 830 x 750 mm Internal dimensions (HxWxD):  (more)610 x 600 x 535 mm

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW