LAUDA ECO E 4 S heating thermostat

Heating thermostat from 20 to 200°C, with LCD display and simple programming functions LAUDA ECO sta (more)nds out for its range of features and ease of use. ECO thermostats are available in Silver (LCD display; simple programming) and Gold (TFT color display; complex programming) models, equipped with a mini USB interface as standard. A LAUDA innovation is the pressure flow controller located on the front of the head. This means that flow regulation between inside and outside is possible even during operation. - Monochrome LCD graphic display for simultaneous indication of actual and set values - The circulation pump can be adjusted to six levels - Integrated programmer: 1 program with max. 20 segments - Fully electronic continuous regulator with PID action - Additional key Tmax for overtemperature protection - The ECO heating thermostat line includes transparent baths up to 100°C and stainless steel up to 200°C - The most powerful units are equipped with the energy-saving LAUDA SmartCool system - Variants in 230V; the 50 Hz are also available with natural refrigerants - Convenient operation with softkey cursor - Safety class III for operation with flammable and non-flammable liquids. - mini-USB interface - Pump connections with 13mm plastic nipples as standard LAUDA tank thermostats are equipped as standard with a cooling coil. The E 4 model is also equipped with a lid for the bowl and connections for external applications. A drain cock on the rear side makes changing the heat transfer liquid easy and safe. Grafico delle prestazioni di riscaldamento dei termostati di immersione ECO Silver con vasca in acciaio inox. Performance graph of the pump pressing on the six levels. TECHNICAL VISUALIZATION Display 1 - Status display 2 - Display of the internal or external temperature value (T-int or T-ext) 3 - Soft-key bar Control panel 4 - Soft keys, left and right 5 - Enter key 6 - Cursor keys for Up, Down, Left and Right. 7 - T max key: display and adjustment of the overtemperature switch-off point 1 - USB interface 2 - Upper module receptacle approx. 51 mm x 27 mm for analog, RS 232/485 module, Profibus module and contact module 3 - Lower module receptacle approx. 51 mm x 17 mm for Pt100/LiBus module 4 - Connection socket 75S for control cable of cooling underpart for RE 1050 S 5 - Rating label 6 - Connection socket 51H for power supply between the control head and cooling underpart 7 - Mains connecting lead 1 - Cooling coil connections 2 - Pump connection: outflow and return (as standard only with E 4 S and ET 15 S) 3 - Four feet 1 - Mains connecting lead 2 - Rating label 3 - Bath draining tap 4 - Bath drain point

Refrigeration thermostat KT 08-22 / -42 FRYKA Main features: - Electronic temperature control with L (more)ED display - Interchangeable circulation pump - Refrigeration unit: silent, fully hermetic, sealed, air cooled, low maintenance - Stainless steel tank - Easy to clean: Interior without frames, rounded corners - No electronic controls exposed to vapors - Ram protection ring - Four mounting clamps (M8 threads) at the corners of the tub for attaching support rods - Bathtubs in 18/10 stainless steel

VELP FOC 250I Refrigerated Thermostat Incubator / Drying Oven Total volume: 225 litres FOC225I Usefu (more)l internal volume: 196 litres Temperature range: 3.0 to 50.0 ° C Internal temperature indicated by a display Temperature resolution: 0.1 ° C Electronic thermoregulation system: AUTO-TUNING 2 internal electrical outlets Number of shelves included: 4 Power: 350W Weight: 40 kg Dimension (WxHxD): 540x1300x560mm (21.6x23.2x23in) With internal glass port Continuous ventilation and the Auto-Tuning thermoregulation system ensure temperature uniformity throughout the chamber. The temperature can be set from 3 to 50 °C, the reading on the display refers to the actual internal temperature. The FOC 225I is equipped with two internal sockets controlled by an external switch

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Proline heating thermostat with tank Proline clear-view LAUDA thermostats have been designed for dir (more)ect observation of objects. They are ideal for use with LAUDA Scientific PVS or iVisc automatic viscometer, as the necessary temperature stability for precise viscosity determination is ensured over the entire temperature range. In addition, the two-chamber principle always guarantees a constant liquid level in the measuring chamber, regardless of the volume and temperature of the medium. PVL models with five layers of insulating glass are suitable for low temperature measurements down to -40° or -60°C when a low temperature chiller or thermostat is connected. These thermostats are available with two different control units. The Master version is designed for all applications where the parameters are not changed very often. The removable Command operating unit (PV C models) incorporates a graphic LCD screen for high operating convenience and a programmer. Notable features - LAUDA Vario Flex pump (pressure pump) with eight selectable power levels - Cooling coil fitted as standard with connection for additional cooler Accessories included Fittings for pump connection, cooling coil Specific features of the Proline PV 24 C model - Tank volume min. 19 L - Tank volume max. 24 L - Tank opening 405 x 135 mm - Bowl depth 320 mm - Usable depth 285 mm - Upper height of the tank 390 mm - State-of-the-art Command control panel, removable, for remote use; LCD display with the most advanced feature set in the LAUDA range - Pump pressure mx. 1.1 bar - Water-cooled temperature range from 20°C to 230°C - Operating temperature range from -60°C to 100°C - Pump connectors M16 x 1 - Fitting 13 Ø

Calibration and regulation of temperatures from -25 to 200°C with LAUDA calibration thermostats The  (more)ECO calibration thermostat is designed for the specific needs of laboratories that carry out calibration and regulation work on a daily basis. The equipment was specially developed for the precise calibration of thermometers, such as industrial platinum resistance thermometers, temperature probes, thermocouples or electrical thermometers. Liquid calibration baths are considered the most stable temperature source and offer the greatest consistency for comparative calibration of temperature probes and sensors in a laboratory. LAUDA calibration thermostats are specially equipped for the calibration of glass thermometers or electric thermometers; they are an ideal solution compared to heat cabinets and metal block thermostats, as these thermostats transfer heat into the thermoregulation liquid 40 to 60 times better than through the air. The LAUDA ECO REJ 1225 G calibration thermostat is ideal for calibrating glass thermometers or electric thermometers. DISPLAY AND CONTROL The thermostat can be easily and flexibly integrated into your existing work processes thanks to a variety of interfaces, including Profibus, Ethernet or Pt100/LiBus. The large color TFT display offers a clear overview at a glance and allows you to program a variety of temperature curves, which are automatically processed by the thermostat to support your daily laboratory work. - Color TFT display for simultaneous indication of actual and set values ​​and temperature profile graph - Intuitive menu navigation in simple language - Simple entry via cursor and function keys. Additional Tmax button for overtemperature protection - Fully electronic stepless controller with PID action - USB interface as standard - Upgradeable with Pt 100/LiBus module for external control and remote control via command console - Programmer with 150 temperature/time segments separable into 5 programs CONSTRUCTION AND BATH - Thermostatic calibration bath with the latest microprocessor technology and integrated cooling system - Safety class III for operation with flammable and non-flammable liquids. - Too high temperature protection adjustable via menu - Pump with six adjustable power levels - Easy flow control between internal and external circulation - 2 separate chamber design for a constant level in the thermostating chamber - Vertical adjustment for calibration chamber overflow - Stainless steel bath with drain valve Why LAUDA thermostats? Calibration applications require thermostats that maintain a constant, temperature-independent liquid level. To achieve this, LAUDA uses a two-chamber tank, the temperature chamber and the operation chamber, also known as the usable space or buffer chamber. A unit pumps fluid from the heat chamber to the application chamber where, if it is overfilled, it has the potential to overflow back into the heat chamber. The cylindrical working chamber is height adjustable, which makes it possible to adjust the immersion height. The thermometers, completely immersed, can therefore be read directly at the point of immersion. Furthermore, the separate calibration chamber ensures constant immersion depth, regardless of liquid volume expansion, excellent temperature stability of ±0.02 K and homogeneous temperature distribution. Standard accessories - 2 screw caps, 2 closing caps - 1 bath cover Performance graph of the pressure pump on the six levels. GREEN TECHNOLOGY The LAUDA ECO calibration thermostat uses refrigerants compliant with the European regulation on fluorinated gases. Furthermore, the REJ 1225 G is optionally available with natural refrigerants.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

PRECISION LABORATORY REFRIGERATOR manufactured by B Medical System SECURITY AND PEACE OF MIND - Forc (more)ed air cooling system for uniform and stable temperature distribution - Rapid recovery of the temperature even in case of frequent openings of the door - Safety thermostat that prevents the internal temperature from going below zero - Extended autonomy in the event of a power failure - Audiovisual alarm system with remote transmission via SMS or email - Optional °B Connected universal software for remote monitoring, reporting (in compliance with FDA 21 CFR Part 11) and archiving long term in combination with a data communication unit CONSTRUCTION AND TECHNOLOGY TO INCREASE THE EFFICIENCY OF THE REFRIGERATOR - Natural refrigerant with high cooling efficiency compliant with US SNAP and EU F-Gas regulations - Polypropylene structure injected with polyurethane foam that provides strong thermal insulation - 4-layer PMMA organic glass door offering maximum insulation, combined with weight reduction to reduce door closing efforts - Automatic internal LED lighting for lower energy consumption - Monobloc structure made with the exclusive rotational molding technique COMFORT OF USE AND DURABILITY - Smooth cleanable surfaces - Silent device - Low heat emission - Modular internal equipment - Easy data export to USB - Electronics with easily accessible temperature display - Heated gasket to minimize condensation - Corrosion resistant construction with lifetime warranty The B Medical Systems multifunction electronics of the "Precision line" series offers a complete alarm system, set point safety, battery backup, and many other control functions; compatible with the °B Connected solution for monitoring and data logging. Equipped with USB port and supplied with two keys. The main differences between the Precision line and Premium line series, in addition to the control panel, are the handle, ergonomic and patented by B Medical Systems for the premium line and the shape of the interior. Download the technical data sheet in Italian or in English for all the details.

The 2103 EnVision Multilabel Plate Reader is a fast, sensitive and versatile benchtop reader that de (more)livers optimized performance in every application and for every label. The unique design features modular label-specific optical mirror modules, high energy flash lamps, and high speed detectors. Light Source: Xenon flash lamp Plate Formats: 1 to 3456 wells Temperature range: from 2°C above ambient up to 45°C (0.5 °C increments) Uniformity: ± 1°C Heating time: < 10 minutes (from ambient up to 37°C) Shaking: linear, orbital, dual orbital Dispense volume: 2-475 µL (1 µL increments) Pump speed: 100-500 µL/s Dead volume: 750 µL. With pump-back function < 50 µL using stardard tubing length and factory settings. Typical Throughput: Fi/Abs (On the fly): 96 wells – 22 s, 384 wells – 27 s, 1536 wells – 36 s Fi/Abs (10 flash): 96 wells – 32 s, 384 wells – 1 min 03 s, 1536 wells – 2 min 56 s Fluorescence polarization (30 flash): 96 wells – 37 s, 384 wells – 1 min 22 s, 1536 wells – 4 min 15 s TRF LANCE (30 flash): 96 wells – 37 s, 384 wells – 1 min 22 s, 1536 wells – 4 min 15 s TRF DELFIA (100 flash): 96 wells – 55 s, 384 wells – 2 min 32 s, 1536 wells – 8 min 52 s AlphaScreen STD: 96 wells – 1 min 32 s, 384 wells – 4 min 54 s, 1536 wells – 19 min 28 s AlphaScreen HTS: 96 wells – 51 s, 384 wells – 1 min 52 s, 1536 wells – 9 min 23 s Detection Limit: Fluorometry (Fluorescein): 96 wells (200 µL) – < 4 pM/ < 0.8 fmol/well, 384 wells (50 µL) – < 4 pM/ < 0.2 fmol/well, 1536 wells (7.5 µL) – < 20 pM/ < 0.15 fmol/well Fluorescence polarization (Fluorescein 1 nM, SD): 96 wells- < 3 mP, 384 wells – < 2 mP, 1536 wells  – < 7 mP TR-Fluorometry (Europium): 96 wells (200 µL) – < 55 fM/ < 11 amol/well, 384 wells (50 µL) – < 55 fM/ < 3 amol/well, 1536 wells (6.6 µL) – < 150 fM/ < 1 amol/well Standard Luminometry (ATP): 96 wells (200 µL) – < 75 pM Enhanced Luminometry (ATP): 384 wells (50 µL) – < 10 pM Photometry Measuring range: 96 wells – 0 to 4 OD, 384 wells – 0 to 4 OD, 1536 wells – 0 to 3 OD Accuracy (at 2 OD): < 2 % Precision (at 2 OD): < 0.1% AlphaScreen (STD and HTS): 384 wells (25 µL, phosphorylated bio-peptide, kinase assay): < 100 amol Dimensions (HxDxW): 580 x 550 x 420 mm Weight: 50 kg

Spectrum Labs KrosFlo Research II Pump 900-1612 w/ MasterFlex Pump Head This was removed from a lab (more)oratory where it was surplus to requirements. The unit powers up but is missing its control interface, but it is operable. Included are; KrosFlo Research II Pump:Model No. 900-1612 MasterFlex Pump Head:Model No 900-1613 Tubing Sizes:L/S 13, 14, 16, 25, 17, 18 Accessories: 1x RS232 to Male DIN Cable: 2x Pairs of GripsMaterial: Plastic 2x ArmsMaterial: Metal The units are bolted to a metal plate attached underneath the unit. They are in good cosmetic condition and can be easily removed if necessary. 1x Misc GripMaterial: Aluminium The unit is in good cosmetic condition. 2x Arm Grips:Material Plastic The units are in good cosmetic condition. They hold position well against the metal upright arms.&nbsp;

Motic BA210S Binocular Microscope with LED Illumination w/o 100x Objective This version of the Motic (more) BA210S is a biological compound microscope with a binocular head and ASC PL 4x, 10x, and 40x objectives designed for advanced biology students, teachers, doctors, and lab technicians. Every aspect of these microscopes contributes to making your daily work easier. The ergonomic shape of the stand and the comfortability of the different heads enables fatigue-free viewing for many hours.The BA210S is designed for both educational and teaching environments from basic life sciences to medical applications. Contrast methods like Phase Contrast, Polarization and Dark field are easily performed by using optional accessories.INCLUDED: The Motic BA210S Binocular Microscope with LED Illumination w/o 100x Objective includes: - 10x Eye Piece - Objectives: ASC PL 4X, 10X, 40X S - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty