LAUDA ECO E 10 G heating thermostat

Heating thermostat from 20 to 100°C, with LCD display and simple programming functions LAUDA ECO sta (more)nds out for its range of features and ease of use. ECO thermostats are available in Silver (LCD display; simple programming) and Gold (TFT color display; complex programming) models, equipped with a mini USB interface as standard. A LAUDA innovation is the pressure flow controller located on the front of the head. This means that flow regulation between inside and outside is possible even during operation. - Monochrome LCD graphic display for simultaneous indication of actual and set values - Transparent polycarbonate bath up to 100°C - The circulation pump can be adjusted to six levels - Integrated programmer: 1 program with max. 20 segments - Fully electronic continuous regulator with PID action - Additional key Tmax for overtemperature protection - The most powerful units are equipped with the energy-saving LAUDA SmartCool system - Variants in 230V; the 50 Hz are also available with natural refrigerants - Convenient operation with softkey cursor - Safety class III for operation with flammable and non-flammable liquids. - mini-USB interface - Pump connections with 13mm plastic nipples as standard LAUDA tank thermostats are equipped as standard with a cooling coil. The E 4 model is also equipped with a lid for the bowl and connections for external applications. A drain cock on the rear side makes changing the heat transfer liquid easy and safe. Graph of heating performance of ECO Silver immersion thermostats with polycarbonate bath. Performance graph of the pump pressing on the six levels.

Heating thermostat from 20 to 100°C, with LCD display and simple programming functions LAUDA ECO sta (more)nds out for its range of features and ease of use. ECO thermostats are available in Silver (LCD display; simple programming) and Gold (TFT color display; complex programming) models, equipped with a mini USB interface as standard. A LAUDA innovation is the pressure flow controller located on the front of the head. This means that flow regulation between inside and outside is possible even during operation. - Monochrome LCD graphic display for simultaneous indication of actual and set values - Transparent polycarbonate bath up to 100°C - The circulation pump can be adjusted to six levels - Integrated programmer: 1 program with max. 20 segments - Fully electronic continuous regulator with PID action - Additional key Tmax for overtemperature protection - The most powerful units are equipped with the energy-saving LAUDA SmartCool system - Variants in 230V; the 50 Hz are also available with natural refrigerants - Convenient operation with softkey cursor - Safety class III for operation with flammable and non-flammable liquids. - mini-USB interface - Pump connections with 13mm plastic nipples as standard LAUDA tank thermostats are equipped as standard with a cooling coil. The E 4 model is also equipped with a lid for the bowl and connections for external applications. A drain cock on the rear side makes changing the heat transfer liquid easy and safe. Graph of heating performance of ECO Silver immersion thermostats with polycarbonate bath. Performance graph of the pump pressing on the six levels.

Heating thermostat Alpha: from 25 to 100°C LAUDA Alpha is the most affordable choice when it comes t (more)o high quality LAUDA thermostats. These reliable and easy-to-use thermostats, with features reduced to the essentials, can be operated with non-flammable liquids and are suitable for both indoor and outdoor temperature control tasks. The cooling system, the pump circulation set and the bath cover set are available as accessories for all thermostats. With the water cooling system, the thermostat can be used for operations from 20° to 100°C. Low-level and overtemperature protection for operation with non-flammable liquids. Qualitative characteristics - Simple and intuitive menu navigation with three-button operation via a large, clearly legible LED display - Integrated timer function to allow automatic shutdown of the device - Under / over temperature protection for operation with non-flammable liquids The back of the Alpha thermostat: clamp, power supply and reset button. Simple control with three buttons and three indicator lights: active heating, active cooling and alarm light. Can be used with any bath vessel up to 30 mm thick with the included screw clamp. Graph of pump characteristics in Alpha Lauda models. Graph of heating curves of Aplha Lauda models. TECHNICAL VISUALIZATION a - Control head with clamp b - Bath vessel c - Four mounting feet 1 - Temperature controller with four segment LED display 2 - Heater active (yellow LED is lit) Cooler active (blue LED is lit) Error signal (red LED is flashing) 3 - Menu functions, select and Enter keys 4 - Mains switch 5 - Screw clamp 6 - Tubular heater 7 - Temperature probe Pt100 8 - Pump outflow with pump outflow reducer 1 - Reset button (press only if the display shows SAFE ) 2 - Cooler cable 3 - Rating label 4 - Mains cable 5 - Screw clamp

Alpha Series - Cooling thermostats with essential functions LAUDA Alpha offers reliable technology a (more)nd modern design for temperature ranges from -25°C to 100°C. This line of devices is suitable for internal and external thermostats with non-flammable liquids (water and water / glycol). Thermostats are the perfect solution for most laboratory temperature control applications. Reduced to the most essential functions, this product line will win you over for its reliability and ease of use. Under / over temperature alarm; countdown function; drain screw; 1 point calibration The RA 8, RA 12 and RA 24 cooling thermostats have a tank lid and pump connections as standard, helping refrigeration across the entire temperature range from -25 to 100°C. Finally, automatic compressor control extends compressor life and offers savings on operating costs. Examples of specific applications - Preparation of samples in chemistry and pharmacy - Functional tests of electronic components - Test of sliding bearings - Beer forcing test - Valve test - Stress test - Bending test of the notch - Expansion test - Brookfield test - Semiconductor coating Notable features - Cost savings thanks to automatic compressor control: cooling capacity is provided only when it is needed - Easy cleaning of the cooling air inlet by simply removing the front cover without tools - Stainless steel tank - Connection of the drain on the rear Graph of cooling performance of RA Alpha Lauda cryostats. Pump performance graph: TECHNICAL VISUALIZATION 1 - Control head 2 - Pump connections: return to bath and pump outflow 3 - Bath cover 4 - Handle on front and back 5 - Removable front cover 6 - Grille on both sides 7 - Four mounting feet 1 - Mains cable 2 - Rating label 3 - Cooler cable 4 - Bath drain nozzle

Refrigeration thermostat KT 18-42 FRYKA Main features: - Electronic temperature control with LED dis (more)play - Interchangeable circulation pump - Refrigeration unit: silent, fully hermetic, sealed, air cooled, low maintenance - Stainless steel tank - Easy to clean: Interior without frames, rounded corners - No electronic controls exposed to vapors - Ram protection ring - Four mounting clamps (M8 threads) at the corners of the tub for attaching support rods - Bathtubs in 18/10 stainless steel

Temperature control range: -5°C to 99°C Usable temperature range: from 30°C below room temperature t (more)o 99°C Temperature accuracy for 0°C: ±1.0°C 37°C: ±0.5°C 90°C: 1.0°C Heating rate: 5°C/min Cooling rate simple temperature operation: 6.0°C/min between 99°C and 25°C 1.5°C/min between 25°C and -5°C Temperature deviation across blocks: Max 0.2°C Dimensions (WxDxH): 220 x 250 x 125 mm Weight: 5 kg

SCALES SUITABLE FOR EVERY USE The Navigator Series is perfect for general weighing applications in l (more)aboratory, industrial, education, retail, commercial, manufacturing, food and portioning environments. A powerful, rugged and multifunctional scale capable of handling a wide range of weighing applications with features such as fast stabilization time, overload protection four times its rated capacity and easy operation. - Excellent value for money - One-second stabilization to improve efficiency, productivity and throughput - Overload protection system, capable of withstanding loads up to four times higher than the nominal capacity: protect the scale from improper use. Applications Weighing: Determines the weight of the items on the pan in the selected unit of measure. Piece Counting: Count the number of pieces on the pan using a uniform weight. Percent Weighing: Measures the weight of a sample displayed as a percentage of a pre-set reference weight. Checkweighing: Compares the weight of a sample against the set targets. Other standard features and equipment ABS construction, stainless steel weighing pan, transport lock, menu switch and safety lock for adjustment, non-slip and adjustable feet, bubble level, mechanical and software overload/underload protection, indicator stability, low battery indicator, auto power off, user selectable print options, user selectable communication settings. MODELLI DISPONIBILI Applications Weighing, Parts Counting, Percent Weighing, Checkweighing Display Liquid Crystal Display (LCD) with backlight Operation AC adapter (included) or 4 C batteries (not included) Communication RS232, USB, or Ethernet (available as accessories) Construction ABS housing, stainless steel pan, transportation lock, slip-resistant and adjustable feet, leveling bubble Design Features Menu and calibration lock switch, mechanical and software overload/underload protection, stability indicator, low battery indicator, auto shut-off, user-selectable print options, user-selectable communication settings SUITABLE FOR ANY FIELD AND USE EDUCATIONAL: valuable overload protection system. Additionally, the portability of the Navigator balance makes it ideal for field experiments. LABORATORY: simple to clean, precise and easy to use in the laboratory. Ideal for laboratory applications such as formulation, quality inspection, testing and experimentation. INDUSTRY: Robustness, speed and accuracy, it is ideal to use in medium-light industrial applications such as paint and ink mixing, packaging, sampling and piece counting. SALES, TRADE, AND MANUFACTURING: Rugged, Portable, and Reliable. Ideal for use in shipping and receiving, retail or warehouse environments. Battery operation and counting and checkweighing modes expand the possibilities of use in hobby, inventory management, inspection and quality control. FOOD AND PORTIONING: hygiene, duration and reduced maintenance. Ideal for portioning and in pre-packaging. Units of measure such as kg, g, lb, oz, lb:oz and checkweighing and percentage checkweighing modes enhance their utility at the counter, in prep and in the kitchen.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Polarimetry is an important technique for the investigation and analysis of optically active substan (more)ces. Common applications include: Characterization of newly synthesized compounds Quality control of pharmaceutical drugs Precise quantitative analysis of sugars Selective detection of optically active components by HPLC Monitoring and control of enzymatic reactions Principle: Automatic precision Polarimeter with optical null principle by rotation of the analyzer; automatic gain control. Radiation: Na spectral lamp Spectral lines: Selectable from instrument keypad (Na 589 nm) Apertures: Selectable apertures for standard cells and microcells. Detector: Photomultiplier 1P28A. Polarizer and analyzer: Vis-transmitting polarizers Rotatory range: ± 85° Balancing speed: 1.3°/s at 50 Hz; 1.5°/s at 60 Hz. Accuracy: ± 0.002° for rotations ≤1º; ± 0.2% for rotations >1° Reproducibility: Better than 0.002° (for zero and rotational reading). Internal angular resolution: 1 x 10-4 º Integration times: 0.1s, 0.2s, 0.5s, 1s, 2s, 5s, 10s, 20s, 50s and 100s. Autozero setting: Electronically from instrument keypad at any desired position in the rotatory range. User interaction: Either menu-driven from integrated touch-keys (English, German, French, Spanish and Italian), or PC-controlled from POL WinLab or POL WinLab ES software. Display: Stand-alone operation: vacuum fluorescence display, two lines with 20 characters each. Format of results: Selectable from instrument keypad – angular rotation, specific rotation, molar rotation, international sugar scale, user-defined scale with factor and offset. Dimensions (WxHxD): 825 x 310 x 390 mm Weight: 40 kg

Destainer power supply DPS

Wherever high readability and precision are important. Wherever good repeatability in harsh industri (more)al conditions matters. Waterproof steel platforms are the ideal solution for any type of industry. Use the potential Our platforms can work with one of four weighing terminals to choose from: PUE 7.1, PUE HX7, PUE HY10, PUE 5. They have four load cells, which means that no matter where you put the goods on the pan, the measurement result will always be the same. The power of steel The use of stainless steel for both the pan and the frame guarantees you a long life for the platform. It is not intimidated by contact with moist objects or accidental splashes. The entire construction made of stainless steel translates into a high degree of protection for these platforms: IP 68.

Gilson Pipetman G F167900 Starter Kit P20G, P200G, P1000G The Gilson Pipetman G F167900 Starter Kit  (more)bundles three of the most commonly used pipettes—a P20G, P200G, and P1000G—plus pipette holders, tips, and pipetting guide. With a redesigned piston assembly, the PIPETMAN G Pipettes feature extremely low pipetting forces, improving comfort and minimizing injury, while maintaining the durability, accuracy, and reliability of the original PIPETMAN pipettes. With a new seal and lighter springs, the new piston assembly of PIPETMAN G Pipettes significantly reduces the force needed to aspirate and dispense liquids. This benefit is especially helpful during extended pipetting sessions and alleviates common hand stresses caused by repetitive actions.