LAUDA Alpha series immersion thermostat

LAUDA Proline immersion thermostat The LAUDA Proline bridge thermostats with vario flex pump are exc (more)ellent for thermostating in any tank. The PB models have a pressure / suction pump and are used in tanks of 200 mm. While the PBDs are equipped with pumps with more powerful pressure and used in tanks of 320 mm deep. Also available are a telescopic rod for tubs with a width of 310 to 550 mm, an ergonomic handle and attachments for side pumps. The LAUDA Proline bridge thermostats are available with two different control panels. The Master version (PB, PBD) is designed for all applications where the parameters are not changed very often. Models with the removable Command operating unit (PB C; PBD C) offer a graphic LCD screen for high ease of use and optimum functionality. Notable features - PowerAdapt system for optimal adaptation of the max. Heat output. without interfering with the mains power supply - Low level protection and adjustable overtemperature protection with audible alarm. Levels measured with float Accessories included Fittings for pump connection, telescopic rod Specific characteristics of the Proline PBD model - For tanks of 320 mm deep - Master control panel; calibration point, timer, under / over temperature alarms, digital indicators - Pump pressure mx. 1.1 bar - Tank volume max. 80 L - Water-cooled temperature range from 20°C to 300°C - Operating temperature range from -30°C to 300°C - Pump connectors M16 x 1 - Fitting 13 Ø

Heating immersion heater / Circulation thermostat LAUDA E100 Reference LAUDA E 100 Operating tempera (more)ture: 20° – 150°C Temperature stability: ± 0.01 °C Heating capacity: 1.6 kW Max. pump flow (pressure): 17 L/min Sold without bath Equipment tested

Refrigeration thermostat KT 18-42 FRYKA Main features: - Electronic temperature control with LED dis (more)play - Interchangeable circulation pump - Refrigeration unit: silent, fully hermetic, sealed, air cooled, low maintenance - Stainless steel tank - Easy to clean: Interior without frames, rounded corners - No electronic controls exposed to vapors - Ram protection ring - Four mounting clamps (M8 threads) at the corners of the tub for attaching support rods - Bathtubs in 18/10 stainless steel

Varioshake shakers The silent LAUDA shakers are available in a large number of variations and shake  (more)each sample evenly, such as 15ml and 50ml tubes, Erlenmeyer flasks and containers. They can be used for a large number of purposes, thanks to a wide range of accessories. Areas of application: - Biology and microbiology - Medical diagnostics - Analytical laboratories - Test institutes, universities and research facilities - Quality Assurance Laboratories Reliable and durable with new LAUDA design The shakers are the laboratory's trusty 'workhorse'. LAUDA agitators are produced with 'GFL technology' and are synonymous with the highest quality, reliability and durability. Their robust, low-wear mechanical system ensures extremely smooth operation and reliable continuous service. Furthermore, thanks to the new LAUDA design, the stirrers adapt to any laboratory environment, thanks to their small footprint and are extremely easy to use. Control panel: analog or digital The LAUDA Varioshake VS 8 OE and BE, with analog rotary controllers, allow adjustment of speed and operating time. Digitally controlled agitators provide an extended timer range, start / stop function and provide the ability to save the latest operating parameters. The wide range of accessories allows Varioshake shakers to be adapted to any need without problems. Shaker tray, test tube holder, Erlenmeyer flask clamp easy to install in seconds. All available as an accessory. Turn on, set the shaking frequency, set the running time, done. Highest quality materials: daily use for years without problems. The video dedicated to the Lauda Varioshakes with digital control.

Like new! Heidolph Outlet instrument*. 12 months warranty. *Heidolph Outlet instrument can be overst (more)ocked item, returns, demo instrument etc. They are checked by Heidolph and in a 100% functional condition. Profit from great savings thanks to slight optical defects. - Recommended for standard applications - Convex rollers do not squeeze or crush organic cell cultures - Pump head features ball bearings - Rollers made of stainless steel and polyamide - For tubes with a 2.5-mm wall thickness (wt) - Depending on drive and tubing, the flow rate ranges from 2.0 to 4,151 ml per minute

RS 232 cable: scale (PUE H315, PUE 5 indicator) - computer. Standard cable length: 2 m Customized ca (more)ble length (extra charge): 5 m, 10 m Compatible with: Scales operated via PUE 5.15 (5.19) terminal PUE 5.15 (5.19) terminal Scales operated via PUE H315 terminal PUE H315 terminal

The MW-01-A mass converter is designed to be a component of an industrial load cell scale. Depending (more) on the needs, communication with the mass converter can be carried out via the following communication interfaces: RS232, RS485, Ethernet, Ethernet IP, Profibus or Profinet. The MW-01-A mass converter is compatible with indicators and PC. Operation of the MW-01-A mass converter via PC is carried out using „MW Manager” software.

Motic BA310 POL Trinocular & EPI Illuminator Magnification Range 5x to 50x Optical System Colour (more) Corrected Infinity (CCIS) Illumination Koehler Quartz 30W Halogen, Epi-illumination Halogen 12V/50W Features - Polarizing microscope - Trinocular head - 360 degree rotatable stage - Rotatable polarizer - Rotatable analyzer - Focusable, center able Bertrand lens - WF PL10x/20 eyepiece - CCIS Plan LP Strain-free Objectives - Manufactured in accordance with European RoHS Standard to avoid contact with lead - Anti-fungus treatment applied to all parts of the microscope for humidity protection - Switching power supply for use worldwide (100-240V) The BA310POL is an extremely powerful yet affordable polarization microscope for transmitted light samples. Designed for the examination of birefringent samples from petrography and mineralogy, it can also be used for the synthetic materials industry where repeatable observations can be performed with efficiency and reliability. The BA310POL also works especially well in educational applications of material professions, where affordability and ease-of-use are the key requirements. The BA310 EPI Illuminator is equipped with a Quartz Halogen 12V/50W bulb, ensuring bright and consistent illumination. It includes integrated field and aperture diaphragms, as well as features an external lamp house.INCLUDED: The Motic BA310 POL Trinocular & EPI Illuminator includes: - BA310 Epi-Illuminator - 5X, 10X, 20X, 50X(S) Objectives - Dust Cover - Power Cord - Allen Key - Blue Filter - Spare Fuse - Empty Insertion Plate - Power Cord - Manufacturer’s Documentation - 5 Year Manufacturer’s Warranty Motic BA310 POL Trinocular & EPI Illuminator SpecificationsObservation tubeTrinocular head, Siedentopf typeOptical systemColour Corrected Infinity Optical System (CCIS®)CondenserFocusable and centerable Achromat Swing-out Abbe condenser N.A. 0.9/0.13 (strain-free)DiaphragmIris diaphragmDiopter adjustmentOn both eyepieces, +/- 5 diopterEyepiecesWidefield PL10X/20mm with Diopter AdjustmentFilter holderOn top of the illuminator with fixing capFine focus precision2µmFocus mechanismCoaxial coarse and fine focusing system with tension adjustmentFocusing stroke17mmIllumination featuresRotatable polarizer 360°Inclination30° inclined, 360° rotatingInterpupillary distance55-75mmNosepieceReversed quadruple, single centerable positionsObjective classificationCCIS Plan LP Strain-freeObjective mounting threadW 4/5"x1/36" (RMS standard)Objectives5X, 10X, 20X, 50X(S)PolarizationSwing in/outStageCircular rotating 360°, lockableStage sizeØ160mmStand typeUprightStandard contrast techniqueBrightfield, polarizingTransmitted illuminationKoehler Quartz halogen 6V/30W, Epi-Illumination halogen 12V/50WTravel range X&Y1° increments, 0,1° vernier scaleUpper limit stopUpper limit stop preset but adjustableTransformerInternalPower supply100-240V (CE)Dimensions LxWxH400x220x452mmWeight Net10.4kg Request a Formal Quote