Memmert ICH110 Stability Climate Chamber 108L, 115V

Manufacturer: Binder Model: KBF 720 E5.2 Technical data: Temp MAX: 70 °C Temp MIN: 0 °C Volume: 700  (more)litres Sterile: No Width: 890 mm Width/inside: 576 mm Height: 1925 mm Height inside: 1250.0 mm Length: 1250 mm Depth: 1250 mm Depth inside: 973 mm Number of shelves/ grids: 2 Operation via touchscreen Weight: 309 kg Length inside: 973 mm Voltage: 230 V Interface type: USB|Ethernet Heaters and heating cabinets Features: with overheating protection|with infinitely variable temperature control|with internal glass door|with certification|with timer|with interface|with cooling|with data logger Power: 3100 W Type of convection: Natural Temperature accuracy: +/- 0.2 °C Incubator type: without CO2 supply Humidity range: 10 % r.h. to 80 % r.h. Material inside: Stainless steel Door suspension side: right|left Installation variants: stand-alone Type of temperature control cabinet: Constant climate control cabinet The appliance/system offered here has been tested and is fully functional and ready for use.

CABINET CSB60 - CHEMISAFE Modular solutions for storing chemicals. - Entirely made of 15/10 mm thic (more)k electrogalvanized steel sheet, cold bent - External finish made of 90 micron acid resistant epoxy resin and passage through a thermal tunnel at 200 °C - Monocoque construction with feet for leveling the cabinets - Simple single layer swing doors - Lock and key - Door opening at an angle of 110° - External zip in corrosion resistant plastic - Compartments equipped with fixed retention shelves made of plasticized/painted/stainless steel with adjustable height - Connection collar Ø 125 mm - Standardized pictograms according to ISO 3864 standards Supplied: - 3 plasticized steel shelves (max load 40 Kg distributed evenly) Optional: - Shelves - Timer - Plinth - Retention tank - Door open alarm - Ventilation - Filter

CS 60 PVC - CHEMISAFE CABINET - Completely made with a thickness of 18 mm in HD PVC - Extractor cove (more)r and plinth completely made of cold pressed steel sheet 1.0 mm thick, with epoxy coating with acid-resistant epoxy powders electrostatically applied at a temperature of 200°C, which guarantees a layer thickness greater than 90 microns on the entire surface of the cabinet - Monocoque structure built on a 15/10 mm base with adjustable leveling feet - Division into 2, 3 or 4 compartments to store the different families of non-flammable chemicals separately - Simple hinged swing doors - Key lock - Door opening at an angle of 110° which allows the shelves to be extracted without tilting them - Corrosion-resistant plastic outer zipper - Compartments equipped with containment shelves made of PVC adjustable in height - Connection collar Ø 125 mm - Available with or without suction unit - Modular solutions - Tray shelves - Standardized pictograms according to ISO 3864 standards - Complies with EN 61010-1 standard Supplied: 3 PVC shelves (max load 40 Kg evenly distributed) Optional: - Shelves - Timer - Door open alarm - Ventilation

Memmert ICP 400 cooled Incubator. Temperature range from 0ºC up to +60ºC. Model Size 53 L. Stainless (more) steel. Closed air jacket heating on all sides. Motorised ventilation in the working chamber adjustable in 10% steps (20%-100%) through controller. Highly efficient automatic defrosting system. Microprocessor 3 point controller. Multi-functional programming (menu on 5-digit-LED digital display) of a nearly unlimited number of ramps. Serial interface RS232 incl. The Memmert ICP 400 cooled incubator is a high-quality piece of equipment designed to offer precise temperature control in laboratory applications. With its integrated cooling system, this oven allows you to maintain a constant and uniform temperature inside, making it ideal for storing and cooling sensitive samples. In addition, it has a large capacity of 400 liters and an intuitive interface that makes it easy to use and program. With the Memmert ICP 400 cooled incubator, you can guarantee the integrity and stability of your samples at all times.

Memmert ICH260 Stability Climate Chamber 256L, 115V Temperature Range -10°C to 60°C w/o Humidity (+ (more)10°C to 60°C w/ Humidity) Humidity Control 10 to 80% RH Chamber Volume 256L (9 cu. ft.) Features - Superior temperature and humidity homogeneity for reliable stability testing - Complies with international standards like ICH, WHO, EMA, ASEAN, GMP, GLP, GCCP - Active humidification and dehumidification system for precise control - Large-area air jacket on four sides ensures effective thermal transfer - Hermetically sealed interior for efficient water usage once setpoints are reached - Dual high-grade platinum temperature sensors with mutual monitoring for continuous operation - Double doors with wide-area interior glass to prevent contamination and temperature fluctuations - Intuitive operation with Memmert ControlCOCKPIT and AtmoCONTROL software - Constructed from high-quality, corrosion-resistant stainless steel - Integrated data logger and multiple interfaces for advanced programming and documentation options - Condensation-free operation within specified temperature-humidity ranges - Programmable temperature and humidity ramps via AtmoCONTROL software The Memmert ICH260 Stability Climate Chamber 256L, 115V sets the standard for stability testing, excelling with its precise control of both temperature and humidity, essential for rigorous testing standards such as ICH, WHO, EMA, ASEAN, GMP, GLP, and GCCP. This climate chamber offers a temperature range of -10°C to 60°C without humidity and +10°C to 60°C with humidity, alongside a humidity control range of 10 to 80% RH. Its exceptional temperature and humidity homogeneity is achieved through a large-area air jacket on all four sides and a digitally controlled active humidification and dehumidification system. A notable feature of the ICH260 is its double-door design, which includes a wide-area interior glass door to prevent contamination and maintain temperature stability while providing clear visibility of the chamber's contents. The chamber's interior is hermetically sealed, ensuring efficient water use once the desired setpoints are reached, provided the door remains closed. Additionally, the chamber is equipped with two high-grade platinum temperature sensors with mutual monitoring to ensure uninterrupted, reliable operation even if one sensor fails. Operation is made simple with the Memmert ControlCOCKPIT and AtmoCONTROL software, which allow for intuitive navigation and easy programming of temperature and humidity ramps. The ICH260 is almost exclusively made from high-quality, corrosion-resistant stainless steel, making it both durable and easy to clean. A wide range of programming and documentation options are available through its interfaces, integrated data logger, and software, ensuring that this climate chamber is not only robust but also adaptable to various scientific and industrial applications. INCLUDED: TheMemmert ICH260 Stability Climate Chamber 256L, 115V includes: - 2 x Stainless Steel Wire Shelves - Water Tank w/ Connection Hose - USB Drive w/ Software & AtmoCONTROL Manual - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Memmert HPP750eco Climate Chamber 749L, 115V Setting Temperature Range (without light, with humidity (more)) +5 to +70°C Setting Range Humidity 10 to 90 % rh Chamber Volume 749 L (26.5 cu. ft.) Features - Large 749 L (26.5 cu. ft.) chamber capacity ideal for extensive sample storage - Temperature range with humidity from +5 to +70°C, ensuring precise control for sensitive samples - Accurate to 0.1°C with dual Pt100 sensors for reliable temperature monitoring and control - Humidity range adjustable from 10% to 90% RH, utilizing an external distilled water tank - Efficient humidification via hot steam generator and Peltier-based dehumidification - TwinDISPLAY ControlCOCKPIT with dual high-definition TFT displays and multi-language support - Comprehensive safety with AutoSAFETY system and dual over/undertemperature alarms - Program and manage settings with AtmoCONTROL software via USB or Ethernet The Memmert HPP750eco Climate Chamber 749L, 115V, offers expansive capacity and precise environmental control for research and laboratory needs. With a temperature range from +5 to +70°C with humidity, and 0 to +70°C without, this climate chamber is equipped to maintain stable and consistent conditions. Humidity can be adjusted from 10% to 90% RH, using a hot steam generator for efficient humidification and Peltier technology for energy-saving dehumidification. The chamber's 0.1°C temperature accuracy and dual Pt100 sensors ensure reliability for even the most sensitive samples, providing the highest standards in environmental consistency. This climate chamber offers advanced functionality with Memmert’s TwinDISPLAY ControlCOCKPIT, featuring intuitive dual TFT displays and multi-language support. The system’s AutoSAFETY feature integrates automatic over- and undertemperature protection with alarms, making it ideal for applications requiring uninterrupted monitoring. With programmable settings and calibration via AtmoCONTROL software, the HPP750eco enables seamless data management through USB or Ethernet. Built with durable, scratch-resistant stainless steel and equipped with lockable castors for easy mobility, this unit is both robust and practical for demanding lab environments. INCLUDED: TheMemmert HPP750eco Climate Chamber 749L, 115V includes: - 2 Stainless Steel Grid - Tilt Protection Wall Bracket - USB Drive w/ Software & AtmoCONTROL Manual - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Capacity (max.): 5.5 l/min Final vacuum (max.): 160 mbar Operating pressure (max.): 2.4 bar Permissi (more)ble medium temperature: 5 – 40 °C Permissible ambient temperature: 5 – 40 °C Weight: 1.9kg

Zebra 110 XiIII Plus Thermal Label Printer Lab This item was removed from a university where it was  (more)surplus to requirement. It is in good cosmetic condition and working order, it is supplied with a roll of Labels installed.ss

The HX7.4N H scale is a device controlled by means of the PUE HX7 indicator, and it has been equippe (more)d with a 4-load-cell ramp platform made of stainless steel, AISI 304. This robust design facilitates weighing of heavy loads in humid environment. The ramps enable easy loading and unloading. Indicator with a colour 7” graphic display and a diode bar graph allow to observe visualisation of a current load mass presented in relation to the scale range or declared minimum and maximum thresholds. This makes the operation significantly easier. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety.

Heidolph 036110230 Hei-PLATE Mix 'n' Heat Expert Hotplate Stirrer, 145mm Plate The Heidolph 03611023 (more)0 Hei-PLATE Mix 'n' Heat Expert Hotplate Stirrer, 145mm Plate convinces with its intuitive handling: Thanks to respectively one display per main function (stirring and heating), you have an easily legible eye on all values and settings at any time. The handling is made via two push-and-rotary controls with LED-rings for an easy identification of the active functions. Separate timers for heating and stirring functions create flexibility and let you control your experiments better. The user-friendly menu navigation makes working with this device particularly easy. For controlling the temperature, you can choose between three heating modes: FAST for a particularly quick heating, as well as PRECISE and PRECISE+ for a particularly exact control of your target temperature without overshoot - this is how sensitive samples are optimally protected. Therefore, the device is compatible with the temperature sensor Pt1000 as well as the double sensor Pt1000 that allows the measurement in your sample and in the bath liquid simultaneously. For the stirring speed, there is a three-stage setting (start-up behavior). Furthermore, you can set the rotational direction of the magnetic stirring bar and benefit from the automatic stir bar detector. As a result, your sample is optimally stirred at any time, even when there are irregularities while stirring. This magnetic stirrer is equipped with the most important safety features. The large safety distance between the heating plate and the control panel, as well as the visual residual heat indicator at temperatures 50°C, protect against burns. The patented Kera-Disk® plate made of anodized aluminum is chemical-resistant, scratch-resistant and has a diameter of 145 mm (also available with 135 mm on request). This makes it suitable for use with many accessories and samples on a small footprint. Moreover, the material used allows the fastest heating times. Click Here to View Product Video INCLUDED: The Heidolph 036110230 Hei-PLATE Mix 'n' Heat Expert Hotplate Stirrer, 145mm Plate includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 10 Year Manufacturer's Warranty