Memmert HPP1400eco Climate Chamber 1360L, 115V

This Sanyo Versatile Environmental Test Chamber Model - MLR-351H was removed from a university  (more)lab where it was surplus to requirements. The unit powers up and has been tested with a digital thermometer(not included). The water tank for humidity operation is missing from this unit, therefore it is listed as Spares/Repair. The temperature was first set to 37˚c, when reached, the thermometer read 38.8˚cThe temperature was then set to the maximum temp of 50˚c, when reached, the thermometer read 52.2˚cFinally, the temperature was set to the minimum of 0˚c, when dropped to, the thermometer read 3.1˚c. Inside dimensions - D47 W50 H123cm1 Shelf - 41 x 49cm It is in reasonably good cosmetic condition with marks from use.

Memmert HPP1400eco Climate Chamber 1360L, 115V Setting Temperature Range (without light, with humidi (more)ty) +5 to +70°C Setting Range Humidity 10 to 90 % rh Chamber Volume 1360 L (48.0 cu. ft.) Features - Offers a spacious volume capacity of 1360 L (48.0 cu. ft) - Temperature range settings include +15 to +60 °C with humidity, and 0 to +70 °C without humidity - Precision temperature control with 0.1 °C setting accuracy - Features dual Pt100 sensors in a 4-wire circuit for enhanced accuracy and error monitoring - Humidity range is adjustable from 10% to 80% RH, with a self-priming pump for distilled water supply - Equipped with an advanced TwinDISPLAY digital PID-microprocessor controller and dual high-definition TFT-color displays - Provides AtmoCONTROL software via USB or Ethernet for efficient programming and data management - Safety assured with over-/undertemperature monitor and AutoSAFETY for responsive protection against temperature fluctuations The Memmert HPP1400eco Climate Chamber 1360L, 115V is designed for precise environmental simulations, ensuring optimal temperature and humidity conditions for stability and material testing. With a spacious 1360-liter (48 cu. ft.) chamber, this unit provides extensive storage and flexibility. It offers temperature ranges from +15 to +60 °C with humidity and 0 to +70 °C without humidity, achieving a precise setting accuracy of 0.1 °C. Dual Pt100 temperature sensors in a 4-wire circuit ensure stable conditions, while the humidity system, capable of 10% to 80% RH, is supported by a distilled water supply with an automatic self-priming pump for uninterrupted operation. The HPP1400eco features Memmert’s intuitive TwinDISPLAY, allowing effortless control of temperature, humidity, and other parameters through a multifunctional digital PID-microprocessor. AtmoCONTROL software, compatible via USB or Ethernet, provides seamless programming and data transfer for streamlined management. Built with safety in mind, the chamber includes an over- and undertemperature monitor and AutoSAFETY system to automatically adjust settings in case of deviations, offering visual and acoustic alerts. Constructed with durable stainless steel, this climate chamber exemplifies reliability, ideal for laboratories and industrial applications requiring rigorous environmental control. INCLUDED: TheMemmert HPP1400eco Climate Chamber 1360L, 115V includes: - 4 Stainless Steel Grid - Tilt Protection Wall Bracket - USB Drive w/ Software & AtmoCONTROL Manual - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert HPP410eco Climate Chamber 384L, 115V Setting Temperature Range (without light, with humidity (more)) +5 to +70°C Setting Range Humidity 10 to 90 % rh Chamber Volume 384 L (13.6 cu. ft.) Features - 384 L (13.6 cu. ft.) capacity for flexible storage and incubation - Temperature range from +5 to +70°C with humidity, or 0 to +70°C without humidity - Precise temperature control with 0.1°C accuracy using dual Pt100 sensors - Humidity adjustable from 10% to 90% RH with external water supply - TwinDISPLAY with PID microprocessor control and high-definition displays - AtmoCONTROL software for USB and Ethernet programmability - AutoSAFETY with visual and acoustic alarms for temperature protection - Stainless steel door with inner glass and 2-point locking system The Memmert HPP410eco Climate Chamber 384L, 115V is designed to meet advanced climate control needs with its spacious 384-liter (13.6 cu. ft.) capacity. Engineered for precise temperature and humidity regulation, it offers a setting temperature range from +5°C to +70°C with humidity and 0°C to +70°C without. Dual Pt100 sensors in a 4-wire circuit provide reliable monitoring with a setting accuracy of 0.1°C, ensuring consistent conditions for sensitive applications. The humidity control ranges from 10% to 90% RH, supported by a self-priming external water supply and an efficient hot steam generator, while a Peltier-based cold trap system ensures effective dehumidification. User-friendly control features, including the TwinDISPLAY with an adaptive PID-microprocessor and two high-definition TFT displays, make it easy to adjust parameters like temperature, relative humidity, and program settings. The AtmoCONTROL software allows programmable control via USB or Ethernet, streamlining data management for long-term studies. Safety features like the AutoSAFETY system, visual and acoustic alarms, and robust stainless steel construction—including an inner glass door and a 2-point locking mechanism—ensure reliable operation and optimal protection of your samples. INCLUDED: TheMemmert HPP410eco Climate Chamber 384L, 115V includes: - 2 Stainless Steel Grid - Tilt Protection Wall Bracket - USB Drive w/ Software & AtmoCONTROL Manual - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert HPP750eco Climate Chamber 749L, 115V Setting Temperature Range (without light, with humidity (more)) +5 to +70°C Setting Range Humidity 10 to 90 % rh Chamber Volume 749 L (26.5 cu. ft.) Features - Large 749 L (26.5 cu. ft.) chamber capacity ideal for extensive sample storage - Temperature range with humidity from +5 to +70°C, ensuring precise control for sensitive samples - Accurate to 0.1°C with dual Pt100 sensors for reliable temperature monitoring and control - Humidity range adjustable from 10% to 90% RH, utilizing an external distilled water tank - Efficient humidification via hot steam generator and Peltier-based dehumidification - TwinDISPLAY ControlCOCKPIT with dual high-definition TFT displays and multi-language support - Comprehensive safety with AutoSAFETY system and dual over/undertemperature alarms - Program and manage settings with AtmoCONTROL software via USB or Ethernet The Memmert HPP750eco Climate Chamber 749L, 115V, offers expansive capacity and precise environmental control for research and laboratory needs. With a temperature range from +5 to +70°C with humidity, and 0 to +70°C without, this climate chamber is equipped to maintain stable and consistent conditions. Humidity can be adjusted from 10% to 90% RH, using a hot steam generator for efficient humidification and Peltier technology for energy-saving dehumidification. The chamber's 0.1°C temperature accuracy and dual Pt100 sensors ensure reliability for even the most sensitive samples, providing the highest standards in environmental consistency. This climate chamber offers advanced functionality with Memmert’s TwinDISPLAY ControlCOCKPIT, featuring intuitive dual TFT displays and multi-language support. The system’s AutoSAFETY feature integrates automatic over- and undertemperature protection with alarms, making it ideal for applications requiring uninterrupted monitoring. With programmable settings and calibration via AtmoCONTROL software, the HPP750eco enables seamless data management through USB or Ethernet. Built with durable, scratch-resistant stainless steel and equipped with lockable castors for easy mobility, this unit is both robust and practical for demanding lab environments. INCLUDED: TheMemmert HPP750eco Climate Chamber 749L, 115V includes: - 2 Stainless Steel Grid - Tilt Protection Wall Bracket - USB Drive w/ Software & AtmoCONTROL Manual - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

CS 120UB PVC - CHEMISAFE UNDERCOUNTER CABINET - Completely made with a thickness of 18 mm in HD PVC  (more)- Extractor cover and plinth completely made of cold pressed steel sheet 1.0 mm thick, with epoxy coating with acid-resistant epoxy powders electrostatically applied at a temperature of 200°C, which guarantees a layer thickness greater than 90 microns on the entire surface of the cabinet - Monocoque structure built on a 15/10 mm base with adjustable leveling feet - Division into 2 compartments to store the different families of non-flammable chemicals separately - Simple hinged swing doors - Key lock - Door opening at an angle of 110° which allows the shelves to be extracted without tilting them - Corrosion-resistant plastic outer zipper - Compartments equipped with containment shelves made of PVC adjustable in height - Connection collar Ø 125 mm - Available with or without suction unit - Modular solutions - Tray shelves - Standardized pictograms according to ISO 3864 standards - Complies with EN 61010-1 standard Supplied: 2+2 PVC shelves (max load 40 Kg evenly distributed). Optional: - Shelves - Timer - Door open alarm - Ventilation

Equipped with a rotating barrel with external gas connection. Temperature range: 15°C – 45°C Humidit (more)y range: 0 – 98% rH Diameter barrel: 375 mm Dimensions (HxWxD): 2135 x 1380 x 1080 mm Internal dimensions (HxWxD): 790 x 800 x 725 mm

Astecair 3000L Benchtop Ductless Fume Cabinet This was removed from a university lab where it was s (more)urplus to requirements. The unit powers up and is in good working order. It is in good cosmetic condition with minor marks.

Labconco RapidVapVacuum Evaporation System with Lid HeaterAdvanced vacuum function Microprocessor  (more) controls vacuum at preset level; Automatic vacuum release if power fails LCD shows vacuum level from 0 to 999mbar Rear-mounted vacuum connections: vacuum port, tubing clamps, lid heater receptacle, 30 in.L (76cm) 0.5 in. I.D. tubing for connection to accessory vacuum pump Safety features Lexan™ shield on clear glass lid protects against glass implosion Dual lid clamps hold lid securely in place for vacuum-tight seal Phenol-free gasket provides complete sealing under vacuum PTFE-coated aluminum chamber Audible/visual alarm for end point detected by temperature sensors at heater and block Optional Lid Heater 40w heater plugs into electrical receptacle on rear Eliminates fogging, increases visibility when evaporating water or other high-boiling-point solvents Improved control panel Easy-to-read LCD display prompts operator to program desired parameters, and displays vortex speed by percentage, actual and set temperatures in C, and total time remaining in minutes. Enter up to nine different protocols into memory for easy repetition of exact test parameters Advanced heating system Contamination- and maintenance-free 1000-watt dry block heating system speeds evaporation rate by supplying a controlled amount of heat from ambient up to 100C Heater and sample block move in tandem for more efficient heat transfer Alarm signals completion of run, allowing samples to be left unattended while evaporating to desired endpoint Efficient operation Brushless DC motor ensures safe, maintenance-free operation and provides smooth, variable-speed power up to 1000rpm Produces no potentially dangerous sparks Increased durability Systems may be used with broad range of strong chemicals Powder-coated, aluminum cabinet base with smooth, solvent-resistant acrylic/PVC thermoplastic upper housing Aluminum chamber with PTFE coating conducts heat efficiently and resists corrosion All mechanical components are isolated from chemical fumes and vapors for longer life Chemical-resistant glass lid provides visibility of samples and detaches for cleaning Two clamps hold lid securely in place Phenol-free gasket provides sealing without potential for phenol contamination RapidVap models with optional RS-232 link allow all front panel functions to be performed and monitored from a personal computer (not included) INCLUDED: The Labconco 7900002 RapidVapVacuum Evaporation System with Lid Heater, 115V, 60Hz includes: - Vacuum Hose - Clamps x 2 - Heat Transfer Grease - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Proline heating thermostat with tank Proline clear-view LAUDA thermostats have been designed for dir (more)ect observation of objects. They are ideal for use with LAUDA Scientific PVS or iVisc automatic viscometer, as the necessary temperature stability for precise viscosity determination is ensured over the entire temperature range. In addition, the two-chamber principle always guarantees a constant liquid level in the measuring chamber, regardless of the volume and temperature of the medium. PVL models with five layers of insulating glass are suitable for low temperature measurements down to -40° or -60°C when a low temperature chiller or thermostat is connected. These thermostats are available with two different control units. The Master version is designed for all applications where the parameters are not changed very often. The removable Command operating unit (PV C models) incorporates a graphic LCD screen for high operating convenience and a programmer. Notable features - LAUDA Vario Flex pump (pressure pump) with eight selectable power levels - Cooling coil fitted as standard with connection for additional cooler Accessories included Fittings for pump connection, cooling coil Specific features of the Proline PV 24 model - Tank volume min. 19 L - Tank volume max. 24 L - Tank opening 405 x 135 mm - Bowl depth 320 mm - Usable depth 285 mm - Upper height of the tank 390 mm - Master control panel; calibration point, timer, under / over temperature alarms, digital indicators - Pump pressure mx. 1.1 bar - Water-cooled temperature range from 20°C to 230°C - Operating temperature range from -30°C to 230°C - Pump connectors M16 x 1 - Fitting 13 Ø