Parker NitroFlow Lab Nitrogen Generator Model 4627 Lab

SCHMIDLIN DBS PG-H2 Hydrogen Generator, 250 mL/min Model : PGH2 250 Recommended for GC chromatograph (more) detector gas applications and GC, GC/MS carrier gas applications. Designed with automatic cascading capability.

This Parker Balston Analytical Gas Systems Zero Air Generator  Model - 76-830-220 was removed f (more)rom a university lab where it was surplus to requirements. The item powers on but we were unable to test it further at our facility. The item is in a reasonable, used cosmetic condition.

QL-1000 Laboratory Hydrogen Generator This was removed from a university lab where it was surplus to (more) requirements. The unit powers up but has not been tested further. It is in good cosmetic condition with minor marks.

PEAK Scientific Genius 1053 Nitrogen Generator Lab This item was removed from a university where it  (more)was surplus to requirement. It is in very good cosmetic condition and powers on, we are unable to test it further at our facility. This item requires servicing before use, as the service light illuminates when powered on.

Thermo Haake A25 refrigerated circulating bath with SC150 controller. Capacity 12 L. Flow rate 17 L/ (more)min. LCD screen. Two levels of pump speed adjustment. Temperature range -25 °C to +100 °C. Stability ± 0.02 °C. Maximum pressure 300 mbar. Communications RS485, Ethernet/LAN, analogue I/O. Audible and visual alarm. Dimensions (LFA): external 483*273*711 mm; internal 184*204*173 mm; 36.1 kg. User manual. Improve the accuracy and efficiency of your experiments with the Thermo Haake ARCTIC A25 with SC150 controller, the ideal refrigerated circulating bath for laboratories that demand precision and reliability. With a temperature range of -25°C to 150°C and a capacity of 6 liters, this equipment provides exceptional thermal control and versatility in multiple applications. Its digital display and efficient circulation pump ensure even heat distribution, while advanced safety features offer peace of mind and protection. Optimize your processes and obtain accurate results with the Thermo Haake ARCTIC A25 with SC150 controller!

LABORATORY OVEN SLW SMART POL-EKO SLW - FORCED AIR CONVECTION The SLW series laboratory ovens are de (more)signed to reach high temperatures, up to 300 °C. Available from 15 to 1000 liters with latest generation control, quality materials and top-class performances. Large touchscreen, programming, alarms, lock, stainless steel interior are just a small part of what you will find below! Continue reading and you will be amazed. ABSOLUTE CONTROL The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use, just like your smartphone. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PANEL? - 4,3", clear, full colour touch screen - USB and LAN ports for data transfer - multi-segment time and temperature programs - loop function up to 255 times or endless - adjustable start delay feature - adjustable ramps - recording of min, average and max temperature value for each segment - overview of set and current parameters while operating - operating in temperature or time priority mode - fan speed control in the range of 0 … 100% or 10% … 100% (depending on the chamber capacity) - temperature sensor fail alarm - possibility of temperature calibration by the User - power failure control system (program continued after restoring power) - visual and sound alarm - internal memory for programs and data storage - operating with gloves on - event registry - user manual for direct download QUALITY FIRST Resistant. Durable. POL-EKO ovens are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The SLW SMART series ovens are built with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Powder coated sheet metal structure (graphite front panel) - Stainless steel interior - Insulated door with lock - Protection class 2.0 - Protection class 3.1 (DIN 12880) as option → - Stainless steel shelves - USB port for downloading recording data, events, manuals, service - LAN port - Open door alarm - Access port for external sensor - Rear air-flap - Quality control protocol (at +105°C) SLW SMART SERIES The 10 models of the SLW series cover most of your needs: from mini oven to the 1000 liter internal volume model. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view of your future ovens for drying, analysis or testing. 1 - Rating plate 2 - Access port ø30mm for external sensor 3 - Internal glass door (for incubator models) 4 - Adjustable feet 5 - Shelf 6 - External solid door 7 - Temperature sensors 8 - Open door sensor 9 - Touch control panel 10 - USB port 11 - Handle with key lock 1 - Main switch 2 - Connector for connecting a hose with nitrogen (only for SLWN models) 3 - Air-flap 4 - LAN port 5 - Fuse 6 - Main power socket C20 OPTIONS POL-EKO allows you to increase the possibilities of your oven with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. - Stainless steel shelf - Perforated shelf - Stainless steel basins - LabDesk software - IQ OQ PQ calibration and qualification - Overtemperature protection class 3.1 according to DIN 12880 - Backup battery for the display in case of power failure - Clean contact - LAN cable - Non-standard 20mm access door - Additional 30 mm access door

IKA ROTAVISC SBS hi-vi II HELI Complete Viscosity Measuring Range 80000000 mPas Speed Range 0.01 -  (more)200 rpm Working Temperature -100 - 300 °C Features - Equipped with special ball bearing technology for enhanced robustness, ideal for high sample throughput and frequent spindle changes. - Provides fast and accurate viscosity measurements across a wide range, up to 320,000,000 mPas, with +/- 1% accuracy and +/- 0.2% repeatability. - Offers a wide speed range from 0.01 to 200 rpm with precise setting accuracy, alongside torque display, measurement capabilities, and a timer function for comprehensive testing. - Boasts overload protection, right direction of rotation, and compatibility with an external temperature sensor (PT 100) for a wide working temperature range (-100 - 300 °C). - Supports timer and continuous operation modes, calibration options, and touch function for user convenience and precision. - Complete with a support rod diameter of 16 mm and a telescoping stand stroke of 142 mm for adaptable mounting and measurement conditions. The SBS rotational viscometers from the IKA ROTAVISC series revolutionize viscosity measurement with their innovative steel ball bearing technology, providing superior robustness and reliability for high-throughput applications and frequent spindle changes. Designed for both simple and complex viscosity tests, these devices offer a comprehensive measuring range up to 320,000,000 mPas with exceptional accuracy of +/- 1% and repeatability of +/- 0.2%. The motorized IKA HELISTAND enhances measurement precision by moving the viscometer uniformly through the sample, supported by an intuitive 4.3" TFT display for easy operation and digital leveling for optimal setup. With features like stepless speed adjustment, a wide working temperature range, and connectivity options for data management, the SBS series stands out as a versatile and efficient choice for demanding laboratory environments.INCLUDED: The IKA ROTAVISC SBS hi-vi II HELI Complete includes: - ROTAVISC SBS hi-vi II control - HELISTAND - T-SP-SET - SP set-2 - PT 100.8 - Guard rail - Manufacturer's Documentation - Two Year Manufacturer's Warranty

KingFisher FLEX Particle Processor Type 711 This was removed from a working lab where it was surplus (more) to requirements. The unit powers up and the lab confirmed that it was in full working order prior to removal. It is in excellent cosmetic condition with minor marks from use. It has a 96-well head fitted. The system is supplied with a Dell Optiplex 7010 unning Windows 7.Monitor, mouse, keyboard & USB cable included.Thermo BindIT 4.1 installed.Kingfisher Flex connects to the PC.

Thermo Scientific Megafuge 16 ventilated centrifuge. Maximum speed 15,200 rpm (25,830 x g). Includes (more) TX-400 rotor, whose maximum speed is 5000 rpm, four buckets and adapters for 14 10 ml tubes. (Adapter ref. 75003681). Nine acceleration ramps and 10 deceleration. Digital screen. Memory for 6 programs. Maintenance free induction motor. Timer 9 h 99 min. and continued. Safety and imbalance controls. Dimensions: 60.5*44*36cm; weight 57 kg. Other adapters not included. Ref: Thermo Scientific Set of 2 15 mL adapters (Cat. No. 75003682) and Set of 2 50 mL adapters (Cat. No. 75003683). The Thermo Megafuge 16 is an easy-to-use benchtop centrifuge with intuitive controls, a digital setup display, and a memory bank of six programs to store your processes. It has a maximum capacity of 1.6 liters, reaches a maximum of 15,200 rpm and a timer of up to 9h59min. It is recommended, among other applications, for cell culture, blood processing, microplates, etc.

Hirayama HICLAVE HG-50 Floor-Standing Autoclave with Automatic Lid, 50L, 120V Chamber Volume 50L Ste (more)rilization Temperature Range 105°C to 135°C Chamber Dimensions 14.3" x 19.0" (36.4 cm x 48.2 cm) Features - Space-saving design with lid opening upward - Agar sterilization mode for sterilizing agar and then automatically maintaining it at liquid temperature - Dual-sensing lid interlock prevents lid opening when chamber is pressurized or when temperature exceeds 97°C - Agar melting mode for melting agar and maintaining it at liquid temperature, or for a hot, faster start-up - One-touch lever to easily open and close chamber lid - In-process display shows the status and the progress of sterilization cycle - Door-closure sensor provides a prompt and the cycle will not start unless the door is closed properly The Hirayama HICLAVE HG-50 is a floor-standing autoclave with an automatic lid, offering a 50-liter chamber capacity. It features dimensions of 19.7" x 27.2" x 35.0" and a chamber size of 14.3" x 19.0". This autoclave operates within a temperature range of 105°C to 135°C, with a sterilization timer adjustable from 1 to 300 minutes. Notably, it includes an agar warming range to maintain temperatures between 45°C and 60°C for up to 24 hours, preventing coagulation. The HG-50 provides a delayed auto-start function, programmable from 1 to 99 hours, and a built-in cooling fan. It offers a range of safety features, including a circuit breaker with GFCI and multiple power cut-offs. The model comes equipped with a 15-liter steam condenser, a 2-liter drain water bottle, and can operate on either 120V or 220V. The HG-50 is part of the HG-Series, which includes four models with varying features such as programmable auto-start, safety interlocks, multiple sterilization cycles, and an advanced control panel. The larger models, HG-113 and HG-133, incorporate a radiator for efficient steam condensing. INCLUDED: The Hirayama HICLAVE HG-50 Floor-Standing Autoclave with Automatic Lid, 50L, 120V includes: - Power Cord - Operator's Manual - 1 Year Manufacturer's Warranty