KGW Isotherm FB-0-CAL

GT 3000 Ultra Zero Air Generator VICI DBS Model : N-GT 3000 The GT Ultra Zero Air generator produces (more) laboratory grade purified air for various GT-detection systems (e.g. FID, NPD, FPD) and dedicated analyzers.

This Parker Balston Analytical Gas Systems Zero Air Generator  Model - 76-830-220 was removed f (more)rom a university lab where it was surplus to requirements. The item powers on but we were unable to test it further at our facility. The item is in a reasonable, used cosmetic condition.

QL-1000 Laboratory Hydrogen Generator This was removed from a university lab where it was surplus to (more) requirements. The unit powers up but has not been tested further. It is in good cosmetic condition with minor marks.

This Q-Lab Q-Sun Xenon Test Chamber Xe-1-BC was removed from a university lab where it was surplus t (more)o requirements. The unit powers up but shows the following error. M26 - LAMP COOLING BLOWER FAILURE.The manual states: 1. The blower is bad.2. The blower relay is bad.3. The airflow switch is bad. We have been advised that the system is missing some essential parts. These parts are available from the manufacturer. It is in otherwise good cosmetic condition with minor marks. It is sold for spares/repairs due to the error.

Applied Biosystems MDS SCIEX 3200 Q TRAP LC/MS/MS System with Peak Scientific Nitrogen Generator Thi (more)s system was removed from a university lab where it was surplus to requirements. The system is in very good cosmetic condition. It powered on, with the 3200 Q Trap and nitrogen generator functioning as expected. The Varian vacuum pump is also in good working order, no further testing was carried out. The previous client stated that this system was in full working order prior to removal. The system comprises: - Applied Biosystems MDS SCIEX 3200 Q TRAP LC/MS/MS - Assembly No.: 1007440 - Serial No.: AF012360607 - Peak Scientific Instruments Nitrogen Generator - Model No.: NM20ZA - Serial No.: J06-06-06 - Running hours: 13,096 - Varian DS602 Vacuum Pump - Model: 949-9335S001 - Serial No.: 238954 - Fitted with oil mist filter EMF20 Code A46229000 - 2 x Sciex power supply units (Assembly No. 014179, Serial Nos. 15470210, 120985175) - 2 x Honeywell 9" black and white monitors (Model HMM9, Serial Nos. H321000214, H321000065) - Lenovo MS PRO PC - Type 2561 - Serial No.: ES10392192 - Loaded with Applied Biosystems Analyst v1.4.2, National Instruments Measurement & Automation Explorer v4.2.1, Chromeleon 6.8, and 3200 QTrap software - Dell Monitor - Serial No.: CN-OUW191-71618-812-ALAB - Lenovo wireless keyboard and mouse - Serial No.: 201209008012 Included Manuals: - 3200 QTRAP Tuning, Calibrating, and Optimising Guide - Analyst Software Tutorial - API Safety Practice Manual Additional accessories: - 1 x MonoSpray II assembly (Part No. 1014666, Serial No. 010158072606) - 4 x brackets (Part No. 016159A) - 4 x 16mm plastic tubing Y-connectors (Part No. 419-7271) - 60 x swabs (approx) - 8 x mixed packets of small O-rings and micro bore tube end connectors - 5 x Pico Tip Emitters (Stock No. FS150-20-10-D-S) - 1 x SGE Analytical 500nl syringe - 1 x Pressure Sensor MPL-503 - 7 x Pico Tips (Nos. 027459, 025388, 025388, 025392 [x4]) - 3 x plastic hose coils for nitrogen - 1 x 10-litre Nalgene bottle with 3-port top - 1 x 5-litre Nalgene bottle with SVC pressure valve (Part No. LVA30-03F-C4)

The EF is a class II biological safety cabinet. The EF offers the user the possibility to work safel (more)y with bioagents under sterile conditions via the work opening, without complete physical shielding of the experiment. Average downflow (in working position): 0.36 m/s ±0.05 Average downflow (in standby position): 0.10 – 0.20 m/s Average inflow at the top of the working opening (in working position): 0.28 m/s Average inflow through the entire working opening (in working position): > 0.5 m/s Air exhaust (in working position): 600 m³/h ± 25 Sound level: < 56 dB A Lighting: 2x TL-high output (white – No. 840) Lighting intensity: 1550 Lux UV lighting type: UV-C UV lighting wavelength: 253 nm Pre-filter: G3 (EN 779) (1760 x 445 mm) Downflow filter: Astrocell HEPA 18P6+ (H14 acc. EN 1822) (610 x 1830 x 69 mm) Emission filter: Astrocell HEPA 7P6 (H14 acc. EN 1822) (762 x 610 x 69 mm) Working opening in working position (HxW): 165 x 1800 mm Maximum working opening: 350 mm Working surface (WxD): 1719 x 440 mm Internal dimensions (WxDxH): 1800 x 605 x 725 mm Dimensions (WxDxH): 1943 x 844 x 1552 mm Height including base: 2297 mm Weight: 315 kg

This Jun Air Oilless Air Compressor Model No. OF302-25MD2 was removed from a university lab where it (more) was surplus to requirements. We had the compressor professionally serviced and certified. The engineer fitted a new pneumatic pipe and it now is in full working order. It cycles at 120psi. It is in good cosmetic condition with only minor marks from use.

Sachtler Video 15SB Camera Camcorder Carbon Fibre Tripod And Fluid Head This item was removed from a (more) university where it was surplus to requirement. It is in good cosmetic condition with no damage preventing its functionality. Tripod Height Range: 82 - 170cm This item includes the carry case shown in slideshow.

MA X7.A moisture analyzers are hi-tech measuring instruments intended for quick determination of rel (more)ative moisture content, dry mass content and other parameters in samples of different substances. MA.X7.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean &ndash; operator does not touch moisture analyzer&rsquo;s housing. Removing any shocks caused by manual closing of the chamber &ndash; the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X7.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and &ndash; thanks to databases &ndash; particular drying process may be set for a specific product. Highlights of X7 Series moisture analyzers: Automatic opening and closing of the drying chamber 7&rdquo; capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X7.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X7 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M &ndash; the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D &ndash; the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R &ndash; the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g &ndash; the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.