Climatic chamber KKS 115 POL-EKO

ECO G Lauda Series - Refrigerated Thermo-Cryostats LAUDA ECO G cryostats offer reliable technology a (more)nd modern design for temperature ranges from -50°C to 200°C depending on the models. Microprocessor management and integrated cooling system. Gold control heating head (TFT color graphic display and graphic illustration of temperature profiles), with 5 programs and 150 segments each, equipped with mini USB interface. These models offer the highest performance conveyed by the LAUDA SmartCool intelligent system, for maximum energy savings. The circulation pump can be adjusted to six levels and the comprehensive range of ECO devices offers cooling capacities from 180 to 700 watts. Examples of specific applications - Sample preparation in chemistry and pharmacy - Functional tests of electronic components - Bearing tests - Beer forcing test - Valve tests - Stress tests - Bending test - Expansion test - Semiconductors Notable features - PID microprocessor management - TFT graphic display with graphic representation of temperature profiles - Alphanumeric navigation menu - Overtemperature protection - Protection class III for operation also with flammable liquids - Pump adjustable to 6 levels - Front adjustment of the external/internal pump power without removing the control unit - USB interface - Possibility to upgrade with various interfaces - Possibility of upgrading with Pt100/LiBus for external control via console - Programmer with 150 segments for 5 programs - Integrated programmer with up to 20 segments - Standard pump connectors - Steel tub - Drain tap Graph of cooling performance of ECO Gold LAUDA cryostats. Performance graph of the pump pressing on the six levels.

Peak Scientific NM30LA MS Nitrogen Generator This item was removed from a university where it was su (more)rplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Texol Genysis NitroGenerator Nitrogen Generator This item was removed from a university lab where it (more) was surplus to requirements. The unit is in reasonably good cosmetic condition, with some stain marks on the top and side panels. It is mounted on four wheels and operates on a 24-volt power system, but no power adapter is supplied. When powered on, the front power light illuminated, and the programmer inside the front door displayed system information. No further testing could be carried out as the unit must be controlled by an external system. Power supply not included.

Peak Scientific Genius 3020 Nitrogen Generator Lab This item was removed from a university where it  (more)was surplus to requirement. It is in very good cosmetic condition and powers on, we are unable to test it further at our facility.

KK - DURABLE AND HIGHLY CUSTOMIZABLE The KK 500 FIT DS allows the operator to precisely set the temp (more)erature and humidity inside the chamber, as well as control and monitor the light intensity. You can set the temperature from 0°C to 60°C (with the lights off) or from +10°C to +50°C (with the lights on) and thanks to an ultrasonic humidifier, adjust the humidity from 30% up to 90%. The wording 'DS' (Door-Side) indicates that the fluorescent lamps are installed in both the lateral walls and the door. They are equipped with the most advanced POL-EKO control panel: the Smart PRO touchscreen. Large 7' display, WiFi for communication and data transfer, programming, alarms, internal memory for recording and overview of data in graphic form and much more, including standard software for complete management via PC. Continue reading and discover all the other surprising features of these climatic chambers! ABSOLUTE CONTROL The SMART PRO control panel is among the most complete you can find on the market. You can manage the instrument and day/night conditions with control of light intensity in an instant, with the large touchscreen. You will save your temperature, humidity and light programs and download the event log, for a professional and precise workflow. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. Thanks to SMART PRO you will be able to have possibilities that you didn't have before. Cutting-edge functions and freedom of transfer and remote use, thanks to LabDesk software. You can find all the features of the SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PRO PANEL? - Sharp 7' color touch screen - LAN, USB and WiFi ports for communication and data transfer - Fast, multi-segment, time and temperature programming - Adjustable ramps - Recording of the minimum, average and maximum temperature value for each segment - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - Fan speed control 0...100% or 10%...100% (depending on chamber capacity) - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Temperature sensor failure alarm - Event log with user notifications - Controls can be managed even when wearing latex gloves - Overview of the set and current parameters during operation in tabular and graphical form - Operation in temperature or time priority mode - Ability to create user accounts with assignment of rights and passwords - Memory of 40 user programs - Data log – 10,000 data records for each user, ability to view data on screen in tabular or graphical form - Direct data download via USB port - Event log QUALITY FIRST Durable. Tailored. Tailored? Yes! Light panels are made to your specifications, with a range of different wavelength LED options available. As standard, for the KK 500 FIT DS, fluorescent lamps (white light 840 - continuously adjustable) are installed in the side walls and in the door. The climatic chambers of the KK Smart series are builded with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Insulated door with lock - Internal glass door - Interior made of acid-resistant stainless steel according to DIN 1.4301 - Stainless steel grill shelf (INOX) - Overtemperature protection class 3.3 according to DIN 12880 - Castors - Quality control protocol (at +25°C and 60%rH) - Automatic defrost function - USB port, LAN (with cable) and Wi-Fi connection - Lab desk software - External probe insertion hole diam. 30mm to the left - Deionized water tank - Open door alarm Presentation of the climatic chamber with LED lighting: Together with the climatic chamber you will also receive: DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view of your future ovens for drying, analysis or testing. 1 - Rating plate 2 - Fan 3 - Internal glass door 4 - Hole for ø30mm external probe 5 - Shelf 6 - Position of the condenser 7 - Wheels with lock 8 - Solid external door (optionally with window) 9 - Touch screen control panel 10 - USB port 11 - Door open sensor 1 - Container for deionized water 2 - Power cable 3 - Connectors 4 - Connectors (to a tank with demineralised water or deionizer) 5 - Service connector 6 - Connection to the drain 7 - Main switch 8 - LAN port 9 - Fuse For larger models (KK 500 / 700 / 1200 / 1450): a - Power cable b - Container for deionized water c - Condensate collection tray with pump d - Main switch e - LAN port f - Fuse POL-EKO allows you to increase the possibilities of your climatic chamber with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. In the photo, the inside of a climatic chamber with LED series Fitotrone System. For more information, we invite you to view our article POL-EKO Accessories, where you can find photos and characteristics of all the accessories available for Pol-Eko models. Accessories for KK climatic chambers: - Optional separate controls for each light module - Grid shelf - Perforated shelf - Reinforced shelf - Stainless steel basins - Phytotron FIT system - Internal socket - Water level sensor - IQ OQ PQ calibration and qualification - Backup battery for the display in case of power failure - Clean contact - LAN cable - Non-standard 20/60/100 mm access door - Additional 30 mm access door - Container for deionized water

KGW Isotherm Type FB-0-CAL flat bottom Dewar flask with grip and flexible applications in laboratory (more), cooling of small samples, storage of liquid nitrogen (LN2), dry ice (CO2) or other refrigerants,storing and  internal short-distance transport,  suitable for use on magnetic stirrers or as an insulating flask. Antimagnetic aluminum cover. Borosilicate interior 3.3.. Maximum LN2 capacity of 150 mL, evaporation rate of 0.25 L/d. Chamber dimensions (Ø*height) 37*140 mm; totals (Ø*height) 58*170 mm.

Memmert IN160plus Natural Convection Incubator 161L, 115V Setting Temperature Range +20 to +80°C Co (more)nvection Type Natural Convection Chamber Volume 161 L (5.7 cu.ft.) Features - Set temperature range from min. 5°C above ambient up to +80°C, with a display resolution of 0.1°C for precise control - Control technology includes adjustable parameters such as temperature (Celsius or Fahrenheit), air flap position, program time, and daylight savings time - HeatBALANCE function adapts the heating distribution between upper and lower circuits from -50% to +50% for optimal performance - Fixed sterilization program (4 hours/160°C) for chamber sterilization (not for load sterilization) - AutoSAFETY system provides integrated over- and undertemperature protection with visual and audible alarms - Stainless steel interior with a volume of 161 L and a max chamber load of 462 lbs, offering robust durability - AtmoCONTROL software available for data logging, programming, and management via USB or Ethernet - High-quality textured stainless steel casing, scratch-resistant and durable, with dimensions of 29.3" x 43.5" x 23" The Memmert IN160plus Natural Convection Incubator 161L, 115V is designed for precision temperature control in demanding laboratory applications. With a working temperature range of min. 5°C above ambient up to +80°C, this incubator ensures consistent conditions for your samples. The twin Pt100 sensors in a 4-wire circuit provide accurate temperature monitoring, while the adaptive HeatBALANCE function allows for fine-tuned heat distribution between the upper and lower heating circuits. The sterilization feature, with a fixed 4-hour cycle at 160°C, ensures a sterile environment within the chamber, safeguarding the integrity of your work. Equipped with the advanced ControlCOCKPIT system, this incubator offers an intuitive interface with dual high-definition TFT displays, allowing users to adjust parameters such as temperature, air flap position, and program times. The durable stainless steel interior, reinforced with deep-drawn ribbing, provides 161 liters of internal volume and can support up to 462 lbs of total load. For seamless data management, the AtmoCONTROL software enables logging and program management via USB or Ethernet. The Memmert IN160plus combines innovation, safety, and durability, making it a top choice for precise incubation needs. INCLUDED: TheMemmert IN160plus Natural Convection Incubator 161L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Balance of the AS R2 PLUS series is a standard analytical weighing device of the SYNERGY LAB line. T (more)he AS R2 PLUS is exceptional due to a range of modern constructional and system solutions that guarantee reliability, precision and accuracy of measurement, and make everyday operation easy. Ergonomic Mechanical Design The latest AS R2 PLUS analytical balance features spacious weighing chamber, and the open-door clearance facilitates easy access to the weighing pan. With this it is possible to use laboratory glassware of various sizes. New aluminium base is a guarantee for weighing system stability. Dual-CLICK system allows tool-free assembly and disassembly of the weighing chamber, and a special design of guides for weighing chamber panes (no rims) makes keeping the device clean convenient. Innovative construction solutions increase balance durability and reliability in long-term operation. Levelling System Standard AS R2 PLUS balances are equipped with a levelling device located at the front of the weighing chamber, which facilitates level control. Levelling operation is now simplified and easier due to the reduced quantity of adjustable supporting points (2 points). Intuitive Operation Balances are equipped with LCD display ensuring clear presentation of the weighing result. Direct access to functions and databases is possible via the following keys: Database – direct access to databases, Function – direct access to basic functions, F1-F4 – programmable function keys and menu navigation keys. AS R2 PLUS analytical balances signal operated working mode, computer connection, weighing and service functions via pictograms. The quantity of displayed weighing units is also expanded. Dedicated status bar enables display of additional messages, e.g. product name, tare value. Real-time mass measurement is presented using bar graph. Internal Adjustment Modernized internal adjustment system guarantees accurate indications in extremely unfavourable conditions. Data Protection Access to valuable information is possible after logging. The administrator manages the data access configuration. ALIBI Memory Data safety is ensured by the ALIBI memory integrated into AS R2 PLUS balances, which enables record of up to 100 000 weighings. ALIBI guarantees continuity of data collection over a long period of time. Databases The information system is based on 5 databases, which allows several users to work with several product databases, and the registered weighing results can be subject to further analysis. The data is registered in 5 databases: operators (up to 10 users), products (up to 1000 products), weighings (up to 5000 weighings), tares (up to 100 tares), ALIBI memory (up to 100 000 weighings). Communication Interfaces The functionality of AS R2 PLUS balances can be expanded using the following communication interfaces: USB-A, USB-B, RS 232, Wi-Fi (option). Additional option: Under-pan weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook.

The newest line of Radwag Mass Comparators enables adjusting mass standards and weights according to (more) the OIML recommendations (R-111) from 1 mg to 5 kg for E1 class and lower. Mass comparators are used both for ensuring traceability of mass measurements, and verification of weights in accordance with the principles of legal metrology. RADWAG Mass Comparators have gained recognition among Accredited Calibration Laboratories in many countries. Mass comparator WAY 5Y.KO series similarly to other models, comprises two components. One of them holds the electronic module, and the other precise mechanical measuring system. The WAY 5Y.KO series comes standard with an aesthetic, large weighing chamber with glass anti-draft shield. All elements of the weighing chamber are manufactured from glass or metal to minimize the influence of electrostatic charges on weighing result. Mass comparator WAY 5Y.KO series features an intuitive menu supporting a user while operating the instrument.