Climatic chamber KK 115 POL-EKO

ECO G Lauda Series - Refrigerated Thermo-Cryostats LAUDA ECO G cryostats offer reliable technology a (more)nd modern design for temperature ranges from -50°C to 200°C depending on the models. Microprocessor management and integrated cooling system. Gold control heating head (TFT color graphic display and graphic illustration of temperature profiles), with 5 programs and 150 segments each, equipped with mini USB interface. These models offer the highest performance conveyed by the LAUDA SmartCool intelligent system, for maximum energy savings. The circulation pump can be adjusted to six levels and the comprehensive range of ECO devices offers cooling capacities from 180 to 700 watts. Examples of specific applications - Sample preparation in chemistry and pharmacy - Functional tests of electronic components - Bearing tests - Beer forcing test - Valve tests - Stress tests - Bending test - Expansion test - Semiconductors Notable features - PID microprocessor management - TFT graphic display with graphic representation of temperature profiles - Alphanumeric navigation menu - Overtemperature protection - Protection class III for operation also with flammable liquids - Pump adjustable to 6 levels - Front adjustment of the external/internal pump power without removing the control unit - USB interface - Possibility to upgrade with various interfaces - Possibility of upgrading with Pt100/LiBus for external control via console - Programmer with 150 segments for 5 programs - Integrated programmer with up to 20 segments - Standard pump connectors - Steel tub - Drain tap Graph of cooling performance of ECO Gold LAUDA cryostats. Performance graph of the pump pressing on the six levels.

CLIMATE CHAMBERS KKS SMART POL-EKO KKS - RELIABLE AND HIGHLY CUSTOMIZABLE Built and designed without (more) compromise, they are successfully used in medical, biotechnological, chemical and industrial laboratories. An important application is pharmaceutical stability testing according to ICH Q1A (R2) - (CPMP/ICH/2736/99). They maintain a constant temperature from 0°C to 100°C and thanks to an steam humidifier, they regulate humidity from 10% up to 90%. They are equipped with the most advanced POL-EKO control panel: the Smart PRO touchscreen. Large 7' display, WiFi for communication and data transfer, programming, alarms, internal memory for recording and overview of data in graphic form and much more, including standard software for complete management via PC. Continue reading and discover all the other surprising features of these climatic chambers! ABSOLUTE CONTROL The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. Thanks to SMART PRO you will be able to have possibilities that you didn't have before. Cutting-edge functions and freedom of transfer and remote use, thanks to LabDesk software. You can find all the features of the SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PRO PANEL? - Sharp 7' color touch screen - LAN, USB and WiFi ports for communication and data transfer - Fast, multi-segment, time and temperature programming - Adjustable ramps - Recording of the minimum, average and maximum temperature value for each segment - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - Fan speed control 0...100% or 10%...100% (depending on chamber capacity) - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Temperature sensor failure alarm - Event log with user notifications - Controls can be managed even when wearing latex gloves - Overview of the set and current parameters during operation in tabular and graphical form - Operation in temperature or time priority mode - Ability to create user accounts with assignment of rights and passwords - Memory of 40 user programs - Data log – 10,000 data records for each user, ability to view data on screen in tabular or graphical form - Direct data download via USB port - Event log QUALITY FIRST Resistant. Durable. POL-EKO climatic chambers are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The climatic chambers of the KKS Smart series are builded with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Insulated door with lock - Internal glass door - Interior made of acid-resistant stainless steel according to DIN 1.4301 - Stainless steel grill shelf (INOX) - Overtemperature protection class 3.3 according to DIN 12880 - Castors - Quality control protocol (at +25°C and 60%rH) - Automatic defrost function - USB port, LAN (with cable) and Wi-Fi connection - Lab desk software - External probe insertion hole diam. 30mm to the left - Deionized water tank - Open door alarm KKS SMART PRO SERIES POL-EKO offers 4 climatic chamber models with capacities from 109 to 749 litres. Unleash your possibilities. In the image below, the graph shows the excellent working range (humidity/temperature) that the POL-EKO climatic chambers are able to offer you, with the KK series (ultrasonic humidifier) ​​and with the KKS series (steam humidifier ). STEAM HUMIDIFIER The KKS climatic chambers with steam humidifier do not emit ultrasound and therefore allow the reproduction of insects (e.g. Drosophila melanogaster). Compared to KK chambers they have a wider temperature and humidity range and can be used for testing electronic components, plastics or building materials. NOTE: common water (conductivity 125-1250 μS/cm) can be used as a source. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view of your future ovens for drying, analysis or testing. 1 - Rating plate 2 - Fan 3 - Internal glass door 4 - Hole for ø30mm external probe 5 - Shelf 6 - Position of the condenser 7 - Wheels with lock 8 - Solid external door (optionally with window) 9 - Touch screen control panel 10 - USB port 11 - Door open sensor 1 - Main switch 2 - Power cable 3 - Connectors 4 - Connection to tap water 5 - Connection to the reverse osmosis system 6 - Control valve 7 - Connection to demineralised water 8 - Connection to the drain 9 - Connection for assistance 10 - LAN port 11 - Fuse Together with the climatic chamber you will also receive: OPTIONS POL-EKO allows you to increase the possibilities of your climatic chamber with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. - Door with panoramic window - Stainless steel wire shelf INOX - Perforated shelf - Reinforced shelf - Stainless steel basins - Internal socket - IQ OQ PQ calibration and qualification - Backup battery for the display in case of power failure - Clean contact - Non-standard 20/60/100 mm access hole - Additional 30 mm access hole - Access control system (card, key tag or device equipped with NFC, for example smartphone) ◉ POL-EKO CUSTOMERS The SPEKTROCHEM research and development center for paints, adhesives and polymers has been a loyal POL-EKO customer for several decades. Use climatic chambers for tests on water-based raw materials prepared in the laboratory. FUN FACT? Thanks to the climatic chambers it is possible to create excellent food products, such as black garlic, which needs to ferment at stable temperatures and humidity. Download the informative pdf: Black Garlic with POL-EKO.

This Parker Balston Analytical Gas Systems Zero Air Generator  Model - 76-830-220 was removed f (more)rom a university lab where it was surplus to requirements. The item powers on but we were unable to test it further at our facility. The item is in a reasonable, used cosmetic condition.

AARIAC Clean Air CLR 20/30 S T UK Compressor Lab This item was removed from a university where it wa (more)s surplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. The unit was installed in late 2023 and had not seen much use. Also included is the following: Nardi Compressor - Dryer 400Installed/Replaced - 23/11/23

Parker Balston N2-04 Nitrogen Generator This was removed from a university lab where it was surplus  (more)to requirements. It is in good cosmetic condition with minor marks but we were unable to test it as it requires a gas cannister.

This Q-Lab Q-Sun Xenon Test Chamber Xe-1-BC was removed from a university lab where it was surplus t (more)o requirements. The unit powers up but shows the following error. M26 - LAMP COOLING BLOWER FAILURE.The manual states: 1. The blower is bad.2. The blower relay is bad.3. The airflow switch is bad. We have been advised that the system is missing some essential parts. These parts are available from the manufacturer. It is in otherwise good cosmetic condition with minor marks. It is sold for spares/repairs due to the error.

Eppendorf 5910R Refrigerated Centrifuge w/ S-4xUniversal Swing Bucket Rotor Maximum Speed 14,000 RPM (more) (4,500 RPM with included rotor) Maximum Capacity 4 x 1000ml Temperature Range -11°C to 40°C Features - Ergonomic soft-touch lid closure system for ease of use - Low noise operation enhances workplace environment - Intuitive interface with large display and five program keys for routine access - Dynamic Compressor Control for precise and stable temperature management - FastTemp Pro for automated, energy-efficient pre-cooling - Automatic rotor recognition and imbalance detection ensure operational safety - Motor-driven lid locks and dual gas springs support secure and effortless lid handling - Features 99 programmable slots and variable acceleration and braking ramps for customized use The Eppendorf 5910R Refrigerated Centrifuge w/ S-4xUniversal Swing Bucket Rotor is designed for high-performance and convenience in laboratory environments. This model achieves a maximum speed of 14,000 RPM and can accommodate up to 4 x 1000ml, with a temperature range of -11°C to 40°C, ensuring versatility for various applications. The centrifuge features Eppendorf's soft-touch lid closure system, which eliminates the need for excessive force when closing the lid, coupled with a low access height for easy loading and unloading. It operates quietly, maintaining a low noise level to enhance your work environment. The interface is user-friendly, featuring a large display, intuitive controls, and five program keys for quick access to routine operations. Advanced temperature management is achieved through Dynamic Compressor Control (DCC), which enables precise cooling and stability. Additionally, the FastTemp pro® option automates pre-cooling to save energy and time. Safety features include automatic rotor recognition, imbalance detection, and motor-driven lid locks. The centrifuge also offers 99 customizable program slots and 10 different acceleration and braking ramps, all geared to streamline and secure laboratory workflows. INCLUDED: The Eppendorf 5910R Refrigerated Centrifuge w/ S-4xUniversal Swing Bucket Rotor includes: - S-4xUniversal Swing Bucket Rotor and Buckets - Set of 15ml Conical Adapters (2 Total) - Set of 50ml Conical Adapters (2 Total) - Power Cord - Operator's Manual - Full 6 Month Parts and Labor Warranty Eppendorf 5910R Refrigerated Centrifuge w/ S-4xUniversal Swing Bucket Rotor SpecificationsMaximum Speed14,000 RPM (4,500 RPM with included rotor)Minimum Speed10 RPMMaximum RCF22,132 x g (4,347 x g with included rotor)Maximum Capacity4 x 1000mlTemperature Range-11°C to 40°CTimer10 seconds to 99:59 hours, or continuousAcceleration Rates10Deceleration Rates10Program Storage99 with 5 program keysNoise Level< 53 dB(A)Maximum Kinetic Energy36,400 JDimensions (W x D x H)28.1 x 26 x 36.8 in. (71.5 x 66 x 36.8 cm)Weight240.3 lb. (109 kg)Electrical Requirements120V, 50/60Hz, 12A, 1440WDownloadsTechnical Specification Download Operator's Manual Download Request a Formal Quote

PS X2.M is a series of advanced-class precision balances of high resolution based on RADWAG MonoBLOC (more)K technology. The innovative construction of PS X2.M balance features a new single-point weighing pan fastening, which ensures its excellent geometry and minimizes eccentricity error. The labyrinth-shape fastening guarantees excellent resistance to contamination. Weighing module RADWAG MonoBLOCK technology enables weighing loads with the readability of d=0.01 g at the maximum capacity of 10 kg. Rigid base ensures stability of the weighing system and great resistance to shocks. Internal adjustment system means precision and high measurement repeatability. Leverage of internal weight mass enables adjustment within the whole measuring range. Features: d=0.01 g readability at 10 kg max capacity great resistance to ambient conditions stability and repeatability over time RADWAG MonoBLOCK technology internal adjustment within the whole measuring range complex databases and ALIBI memory ergonomic 5” colour touchscreen touch-free operation Databases The instrument allows saving completed measurement data as complex reports and graphs. There are 7 databases: Operators (max 100 entries), Products (max 5 000 entries), Weighings (max 50 000 entries), Packaging (max 100 entries) Formulations (max 100 entries), Customers (max 1000 entries), The balance enables creating formulation reports (max 500 entries). ALIBI memory provides data protection and facilitates automatic measurement recording (max 500 000 weighing records). The memory facilitates data previewing, copying and archiving. Communication PS X2.M series is equipped with the following interfaces: 2 x RS 232, USB type A, USB type B, Ethernet and Wireless Connection. USB allows for fast transfer and copying of work results (measurements, reports, databases) to a computer or other weighing device. The balance provides possibility of remote data management.

Edwards T-Station 85H Dry Turbo Station NW40, 100-120V Ultimate Pressure <5 x 10-8 mbar Inlet Con (more)nection NW40 Leak Tightness <1 x 10-6 mbar ls-1 Features - Single dedicated button to start/stop pumps; Easy to read accurate display - Base plate includes rubber feet and cut-outs in the sides for manual handling - The nEXT85 and nEXT300 turbomolecular pumps, XDD1 dry diaphragm pump and E2M1.5 backing pump are all user serviceable - Integrated air cooler acts to cool internal power supply and pump/controller for quiet operation avoiding multiple fans - All metal frame means rugged design that can take abuse without cracking or breaking - Inlet flange options - Available with either an NW40, ISO63 or CF63 inlet flange to suit your application T-Station 85 is a low cost, compact turbomolecular pumping station that seamlessly combines the nEXT85H turbomolecular pump with either a dry diaphragm or oil sealed backing pump, and a simple controller, providing pumping speeds of 47 to 84 ls-1. The T-Station 85 comes with an integrated Turbo and Active Gauge controller which enables single button start/stop of the system. This is combined with the ability to control one of our active gauges, vent valve control and delayed start of the turbomolecular pump to either time or pressure if a gauge is fitted, making the T-Station 85 is ideal for general laboratory needs.INCLUDED: The Edwards T-Station 85H Dry Turbo Station NW40, 100-120V includes: - T-Station Pumping Station Base - XDD1 Diaphragm Pump - nEXT85H Turbomolecular Pump with NW40 Inlet - All Necessary Tubing and Cables for Turn-key Operation - Operator's Manual - 1 Year Manufacturer's Warranty