Thermo Ultimate 3000 HPLC

TSP HPLC P4000 + AS3000

System contains: Solvent tray Vacuum degasser: G1322A Vacuum degasser: The Agilent 1100 HPLC Degasse (more)r features a 4-channel vacuum container, including four tubular plastic membranes, and a vacuum pump. This degasser has a maximum flow rate of 0-10ml/min flow rate per channel and 5-10ml/min at reduced degassing performance. Quaternary pump: Hydraulic system: Dual plunger in series pump with proprietary servo-controlled variable stroke drive, floating plungers and active inlet valve Setable flow range: 0.001 – 10 ml/min, in 0.001 ml/min increments Flow range: 0.2 – 10.0 ml/min Flow precision: < 0.07% RSD, or < 0.02 min SD whatever is greater, based on retention time at constant room temperature Flow accuracy: ± 1% or 10 µl/min whatever is greater Pressure: Operating range 0 – 400 bar up to 5 ml/min, 0 – 200 bar up to 10 ml/min Pressure pulsation: < 2 % amplitude (typically < 1 %), at 1 ml/min isopropanol, at all pressures > 10 bar Compressibility compensation: User-selectable, based on mobile phase compressibility Recommended pH range: 1.0 – 12.5, solvents with pH < 2.3 should not contain acids which attack stainless steel Gradient formation: Low pressure quaternary mixing/gradient capability using proprietary high-speed proportioning valve Delay volume 800 – 1100 µl, dependent on back pressure Composition Range: 0 – 95 % or 5 – 100 %, user selectable Composition Precision: < 0.2 % RSD, at 0.2 and 1 ml/min Autosampler thermostat: Temperature range: setable from 4°C to 40°C in 1°C increments Temperature accuracy (at ambient temperatures < 25 °C and humidity < 50%): – 1°C to + 4°C at a setpoint of 4°C Temperature accuracy (at ambient temperatures > 25 °C and/or humidity > 50%): – 1°C to + 5°C at a setpoint of 4°C Standard autosampler: Pressure: Operating range 0 – 400 bar GLP features: Early maintenance feedback (EMF), electronic records of maintenance and errors Safety features: Leak detection and safe leak handling, low voltages in maintenance areas, error detection and display Injection range: 0.1 – 100 µl in 0.1 µl increments Replicate injections: 1 – 99 from one vial Precision: <0.25% RSD from 5 – 100 µl, <1% RSD 1 – 5 µl Minimum sample volume: 1 µl from 5 µl sample in 100 µl microvial, or 1 µl from 10 µl sample in 300 µl microvial Carryover: Typically <0.1% Sample viscosity range: 0.2 – 50 cp Replicate injections per vial: 1 – 99 Sample capacity 100 x 2 ml vials in 1 tray Injection cycle time: Typically 50 s depending on draw speed and injection volume Thermostatted colomn compartment: Temperature range: 10 degrees below ambient to 80 °C, up to 80 °C: flow rates up to 5 ml/min Temperature stability: ± 0.15 °C Temperature accuracy: ± 0.8 °C (± 0.5 °C With calibration) Column capacity: Three 30 cm Warm-up/cool-down time: 5 minutes from ambient to 40 °C, 10 minutes from 40 – 20 °C Dead volume: 3 µl Communications: Controller-area network (CAN), GPIB, RS-232C, APG Remote: ready, start, stop and shut-down signals, LAN via other series module Safety and maintenance: Extensive diagnostics, error detection and display (through control module and Agilent ChemStation), leak detection, safe leak handling, leak output signal for shutdown of pumping system. Low voltages in major maintenance areas. Diode array detector: Detection type: 1024-element photodiode array Light source: Deuterium and tungsten lamps Wavelength range: 190 – 950 nm Short term noise (ASTM) Single and Multi-Wavelengt: ± 1 × 10-5 AU at 254 and 750 nm Drift: 2 × 10-3 AU/hr at 254 nm Linear absorbance range: > 2 AU (upper limit) Wavelength accuracy: ± 1 nm Self-calibration with deuterium lines, verification with holmium oxide filter Wavelength bunching: 1 – 400 nm Programmable in steps of 1 nm Slit width: 1, 2, 4 , 8, 16 nm Programmable slit Diode width: < 1 nm Flow cells: 13 µl volume, 10 mm cell path length and 120 bar (1760 psi) pressure maximum Control and data evaluation: Agilent ChemStation for LC Analog outputs: Recorder/integrator: 100 mV or 1 V, output range 0.001 – 2 AU, two outputs Communications: Controller-area network (CAN), GPIB, RS-232C, APG Remote: ready, start, stop and shut-down signals, LAN optional Safety and maintenance: Extensive diagnostics, error detection and display through control module and ChemStation), leak detection, safe leak handling, leak output signal for shutdown of pumping system. Low voltages in major maintenance areas. GLP features: Early maintenance feedback (EMF) for continuous tracking of instrument usage in terms of lamp burn time with user-settable limits and feedback messages. Electronic records of maintenance and errors. Verification of wavelength accuracy with built-in holmium oxide filter.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

SCALES SUITABLE FOR EVERY USE The Navigator Series is perfect for general weighing applications in l (more)aboratory, industrial, education, retail, commercial, manufacturing, food and portioning environments. A powerful, rugged and multifunctional scale capable of handling a wide range of weighing applications with features such as fast stabilization time, overload protection four times its rated capacity and easy operation. - Excellent value for money - One-second stabilization to improve efficiency, productivity and throughput - Overload protection system, capable of withstanding loads up to four times higher than the nominal capacity: protect the scale from improper use. Applications Weighing: Determines the weight of the items on the pan in the selected unit of measure. Piece Counting: Count the number of pieces on the pan using a uniform weight. Percent Weighing: Measures the weight of a sample displayed as a percentage of a pre-set reference weight. Checkweighing: Compares the weight of a sample against the set targets. Other standard features and equipment ABS construction, stainless steel weighing pan, transport lock, menu switch and safety lock for adjustment, non-slip and adjustable feet, bubble level, mechanical and software overload/underload protection, indicator stability, low battery indicator, auto power off, user selectable print options, user selectable communication settings. MODELS AVAILABLE Applications Weighing, Parts Counting, Percent Weighing, Checkweighing Display Liquid Crystal Display (LCD) with backlight Operation AC adapter (included) or 4 C batteries (not included) Communication RS232, USB, or Ethernet (available as accessories) Construction ABS housing, stainless steel pan, transportation lock, slip-resistant and adjustable feet, leveling bubble Design Features Menu and calibration lock switch, mechanical and software overload/underload protection, stability indicator, low battery indicator, auto shut-off, user-selectable print options, user-selectable communication settings SUITABLE FOR ANY FIELD AND USE EDUCATIONAL: valuable overload protection system. Additionally, the portability of the Navigator balance makes it ideal for field experiments. LABORATORY: simple to clean, precise and easy to use in the laboratory. Ideal for laboratory applications such as formulation, quality inspection, testing and experimentation. INDUSTRY: Robustness, speed and accuracy, it is ideal to use in medium-light industrial applications such as paint and ink mixing, packaging, sampling and piece counting. SALES, TRADE, AND MANUFACTURING: Rugged, Portable, and Reliable. Ideal for use in shipping and receiving, retail or warehouse environments. Battery operation and counting and checkweighing modes expand the possibilities of use in hobby, inventory management, inspection and quality control. FOOD AND PORTIONING: hygiene, duration and reduced maintenance. Ideal for portioning and in pre-packaging. Units of measure such as kg, g, lb, oz, lb:oz and checkweighing and percentage checkweighing modes enhance their utility at the counter, in prep and in the kitchen.

Ohaus Navigator Portable Scale The Navigator Series is perfect for general weighing applications in  (more)laboratory, industrial and educational environments. A powerful, robust and multifunctional scale capable of handling a wide range of weighing applications with features such as fast stabilization time, overload protection four times its rated capacity and easy operation. Applications Weighing, piece counting, percentage weighing, checkweighing Display Liquid crystal display (LCD) with backlight Operation AC adapter (included) or 4 rechargeable C batteries (not included) Communication RS232, USB or Ethernet (available as accessories) Structure ABS armor, stainless steel plate, transport lock, adjustable and non-slip feet, leveling bubble Construction features Menu lockout and calibration switch, mechanical and software overload / underload protection, stability indicator, low battery indicator, automatic shutdown, user selectable print options, user selectable communication settings.

Equipped with: Carl Zeiss Pl 10x/23 oculairs Carl Zeiss LD A-Plan 5x/0.15 Ph1 Carl Zeiss LD A-Plan 2 (more)0x/0.35 Ph1 Carl Zeiss LD Plan-Neofluar 40x/0.6 Corr Ph2 Carl Zeiss EC Plan-Neofluar 63x/1.25 Oil Ph3 Carl Zeiss EC Plan-Neofluar 100x/1.30 Oil Ph3 Carl Zeiss Axiocam 105 color camera + software + computer Viewing monitor

Interfurn 3 Drawer cabinet Blue 600x600x490