Gilson GX-281 HPLC System

Agilent 1100 UV / Vis Detector (VWD - G1314A). 190-600 nm wavelength range. Greater limits of detect (more)ion with simplified optics for high sensitivity, low deviation from the base line and wide linear range. Use a deuterium lamp as a source of light and a double beam photometer for the detection system. It can be used independently to add as a module to an HPLC. The HP Agilent 1100 Series G1314A Variable Wavelength Detector (VWD) offers high sensitivity while improving productivity. This tool has a wide linear range for the reliable simultaneous quantification of impurities and major and minor products. Programmable wavelength switching for optimized sensitivity and selectivity for the elution of each analyte. Minimum baseline noise with the highest baseline stability for the lowest detection limits. Specs:       Wavelength range: 190-600 nm       Wavelength accuracy: +/- 1 nm       Bandwidth: 6.5 nm       Double beam photometer with deuterium lamp       Linearity:> 2 AU (5%) upper limit       Drift: 3 × 10-4 AU / h at 254 nm       Analog output connection

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The GE AKTA Purifier 10 FPLC System is versatile, modular liquid chromatography systems for fast and (more) reliable separations of proteins, peptides, and nucleic acids by FPLC. AKTA Purifier 10 is designed for purification of microgram to milligram quantities of protein, operating at flow rates of 0.001 to 10 ml/min at pressures of 0 to 25 MPa. Flow Rate Range: Isocratic mode: 0.01 to 100 ml/min in steps of 10 µl/min Gradient mode: 0.01 to 100 ml/min in steps of 10 µl/min Double mode: 0.01 to 200 ml/min in steps of 10 µl/min Pressure Range: 0 to 10 MPa (100 bar, 1450 psi) pH Stability Range: 1 to 13 (1 to 14 with <1 day exposure) Viscosity: Max 5 cP Flow Rate Accuracy (0.2 – 10 MPa): ± 2% or 20 µl/min, whichever is greater Flow Rate Reproducibility (flow rate ≥ 0.5 ml/min): rsd < 0.5% Gradient Composition Accuracy: < ±1% at 0.5 to 100 ml/min Gradient Composition Reproducibility: rsd < 0.25% at 0.5 to 100 ml/min Pressure Sensor Range: 0 to 27.5 MPa Offset error: < 0.05 MPa Scale error: < ±2% Total Volume Between Inlet and Outlet: < 800 µl/module Wavelength range: 190 – 700 nm in steps of 1nm, 3 wavelenghts simultaneously Bandwidth: 4 nm Wavelength accuracy: ±2 nm Wavelength reproducibility: ±0.01 nm Wavelength switch time: < 500 ms (one cycle from 214 nm to 254 nm and back to 214 nm) Linearity: <2 % deviation up to 2 AU at 260 nm with Uracil at pH 2 Noise: Single wavelength (short term, 0.5 – 1 min): <6×10⁻⁵ AU at 230 nm Single wavelength (long therm, 1 – 10 min): <6×10⁻⁵ AU at 230 nm Dual wavelength (short term, 0.5 – 1 min): <2×10⁻⁴ AU at 230 nm and 254 nm Dual wavelength (long therm, 1 – 10 min): <2×10⁻⁴ AU at 230 nm and 254 mm Drift: <2×10⁻⁴ AU at 254 mm System consists of: UPC-900 monitor P-900 pump P-960 pump 2x INV-907 valve 2x PV-908 valve FRAC-950 fraction collector PC

This Listing is for a refurbished Laboklav 80 MV Autoclave Incl. commissioning in UK. (outside the  (more)UK is possible also, please request and we will try and accomodate) Vertical device, 80l, can be changed to horizontal version (stand required) Sterilisation temp. 98-135°C Outer dimensions (w x h x d in mm) 740 x 915 x 600 chamber dimensions (Ø x d in mm) 410 x 610 Steam generator 6,6kW Vacuum incl. pre- and postvacuum, heating during postvacuum Fast re-cooling with double jacket 3N 400V, 50 HZ, 16A, CEE plug Refurbished according to manufacturer's specifications: Reconditioning of pressure vessel incl. pressure test, maintenance incl. spare parts (filter, valves, seal, etc.) According to requirements: Update of cable tree, steam generator, control system and software to the current status.  Test runs to ensure and check functionality

Perkin Elmer JANUS G3 Automated Workstation Lab This item was removed from a university where it was (more) surplus to requirement. It is in very good cosmetic condition and working order. Please note that the unit has shipping locks in place and should not be powered up with these in place. The user log-in information for the included PC is available on request. This system comprises the following: - Perkin Elmer JANUS G3 Automated Workstation - PC, Monitor, Keyboard &amp; Mouse - WinPREP software installed on PC - PerkinElmer Peri Pump - Ducting - 2 x Waste bottle - 3 x Cooling tube holders - Plate support tiles - Trough holders - NewLand Scanner - 56 barcode racks - Ares 2000RT conversion rack

PHCBI CO2 Incubator Model MCO-170AICD-PE With Tray and Shelves Lab This item was removed from a univ (more)ersity where it was surplus to requirement. The unit powers up and is in good working order (thermometer not included).It has been professionally serviced, the report is available on request. It is in excellent condition internally and externally. This item features the following: 4 x shelves: 47 x 45 1 x Stainless Humidity Water Pan: 44 x 25 x 7cm

Collector Temperature: -50°C Ice Holding Capacity: 2.5 L Vacuum Pump Displacement Required: 86 L/min (more) or larger displacement Dimensions (WxDxH): 320 x 455 x 429 mm

Temperature Sensor with rtd Delta Ohm. Memory dual. Screen digital LED indicating the indoor tempera (more)ture (indoor) and exterior (outdoor). Manual selection of measurement in ºC or ºF. Reset button and establishment of maximum and minimum.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW