Agilent 1200 series HPLC

3 modules VARIAN PROSTAR HPLC 330 / 230 / 240I Modules for liquid chromatography (HPLC) Brand: VARIA (more)N Detector: PROSTAR PDA Detector 330 Solvent delivery module: PROSTAR Solvent delivery module 240I Solvent delivery module: PROSTAR Solvent delivery module 230 (Module not functional, for parts) With 2 Deuterium lamps for Prostar 330 PDA new (year of manufacture: 2021) Reference: 0393570502 With accessories

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Programmable flow rate: 0.00 to 5.00 mL/min, 0.01 mL/min increments Maximum operating pressure: 401  (more)bar Pressure ripple: <2% at 0.5mL/min Flow precision: 2 seconds SD Flow accuracy: 2% of setting Gradient accuracy: <1% between 10 to 90% Gradient precisison: <0.5% RSD between 10 to 90% Gradient delay volume: <60 µL (without mixer), <200 µL (with one 50 µL mixer) Inline degasser channels: 2 Dimensions (HxDxW): 430 x 610 x 305 mm Weight: 27.2 kg

This Dionex UltiMate 3000 HPLC System was removed from a university lab where it was surplus to requ (more)irements. It is in good cosmetic condition and powers on but is listed as Spare/Repair due to the faults listed below. "This UPLC was also incomplete without detector, most likely a front end for a MSD. The autosampler needle was broken. The system was connected to our Chromeleon. The pumps were checked but were not pumping properly. " Included are;1 x UltiMate 3000 RSLCnano SystemDevice: NCS-3500RS nanoLCPN - 5041.0010 Accessories/Parts:-Dionex Column PN-164262Dionex PN-1044913 (In black padding)Thermo Scientific Nano ViperDionex 2008 Product Selection GuideDionex Reference Library DVD-ROM2 x PicoTip Emitters5 x Thermo Scientific Stainless Steel EmittersKloehn Micro Syringe

Hitachi Transgenomic Wave L-7000 Series DHPLC System This was removed from a university lab where it (more) was surplus to requirements. All units power up but have not been tested further as they require connection to a PC with software. Included are; Transgenomic/Hitachi L-7400 UV Detector Model: L-7400Part#: 810-0401Serial#: 1147-080 Transgenomic/Hitachi L-7300 Column OvenModel: L-7300Part#: 810-0301Serial#: 1153-014 Transgenomic/Hitachi L-7200 Auto SamplerModel: L-7200Part#: 810-0201Serial#: 1154-136 Transgenomic/Hitachi L-7200 ChillerModel: L-7200 ACCPart#: 810-3301Serial#: 1134-036 Transgenomic/Hitachi L-7100 PumpModel: L-7100Part#: 810-0101Serial#: 1153-228 Transgenomic/Hitachi D-7000 InterfaceModel: D-7000IFPart#: 810-0091Serial#: 1124-131 ERC Inc Hitachi L-761 Pump Drive Unit/DegasserModel: L-761Serial#: 102895N0775 Additional items included: Transgenomic Wave Ineractive Help System CDPart#: 6700002 Transgenomic Wave System Software Accessories CDPart#: 6700006 Transgenomic Wave System Software Accessories CDPart#: 6700005 Transgenomic Manual Binder x 2

Ohaus Scout SKX123 portable scale, with plate Ø 93 mm The OHAUS Scout scale, with its large backlit  (more)LCD display and integrated educational software, is the ideal tool for use in the classroom. It offers premium quality overload protection, fast stabilization times, increased range, more connection options and stackable design - the most advanced learning weighing experience. Applications Weighing, density determination, weighing of moles Screen Liquid crystal display (LCD) with backlight Operation AC adapter (included) or 4 AA batteries (not included) Communication RS232, USB host, USB device, Ethernet or Bluetooth ™ (available as an accessory) Construction ABS housing, stainless steel pan, ABS draft shield (1mg model only), bottom weigh hook, transport lock, manual calibration lock switch, security slot Characteristics of the project Stability indicator, stackable design with storage lid included (excluding 1 mg model), mechanical and software overload / underload protection, low battery indicator, automatic shutdown, automatic tare, span calibration mass included on models with capacity up to 620 g Applications integrated in the scale: - Weighing: allows you to calculate the weight of the samples in the selected unit of measurement. - Density determination: calculation of the density of solids or liquids. Thanks to the integrated weigh below hook, it is possible to carry out tests for the specific gravity of objects that cannot be placed on the weighing pan. - Molar concentration: calculation of the mass of a sample and automatic conversion into the molar concentration.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Microplate type: 96-well Onboard Software: Create, edit and run multiple protocols Soaking: Programm (more)able up to 60 minutes Volume range: 50 to 3000 microliter increments Wash cycles: 1 – 10 Dispense precision: ≤3% CV: 300 µL/well Residual volume: <2 µL/well Wash speed: 96-wells, 300 µL/well, 3 cycles: <30 seconds Vacuum filtration: 5 to 999 seconds Including vacuum pump

Dimensions (WxHxD): 600 x 600 x 580 mm

Julabo MAGIO MX-BC6 Heating Circulator, 230V/50-60Hz Working Temperature Range 20°C to 300°C Heatin (more)g Capacity 3000W Fluid Type Water, Silicone Features - TFT Color Touchscreen - Multilingual - Input for setpoints, warning/safety values and menu functions - ICC (Intelligent Cascade Control), self-optimizing temperature control - ATC3 3-Point-Calibration - Pt100 External sensor connection for measurement and control - Continuously variable pressure/suction pump - Early warning system for low liquid level (DBGM 203 06 059.8) - Adjustable high temperature cut-out, visible via display - RS232/RS485, USB and Ethernet interface for online communication - Integrated programmer - Built-in cooling coil and drain tap The Julabo MAGIO MX-BC6 Heating Circulator, 230V/50-60Hz with 6L bath tank and lid with 3kW heating power to +300°C. Large, color touchscreen UI with built-in help functions. For internal and external temperature applications. Includes Intelligent Cascade Control, self-optimizing for optimum results with settings for band limit, limit setting, co-speed factor and control dynamics. A variable speed pressure / suction pump provides strong circulation for internal or external applications. A built-in cooling coil enables counter cooling with tap water. Barbed fittings for 8 and 12 mm ID tubing are included (pump connections M16x1 male). Includes Pt100 connection for external monitoring and control, electronically adjustable pressure/suction pump, RS232/RS285, USB and Ethernet ports with optional slot for analog communication (requires module 9900100). Modbus TCP/IP incorporated. Stakei port for external accessory control (solenoid valve, etc.). Class III (FL) according to DIN 12876-1. INCLUDED: The Julabo MAGIO MX-BC6 Heating Circulator, 230V/50-60Hz includes: - 2 Each Barbed Fitting for Tubing 8 and 12 mm Inner Dia. (Pump Connections M16x1 Male) - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty