Thermo Scientific Sorvall Discovery M120 SE Centrifuge Spares/Repairs NOTE - THIS IS A SPARES/REPAIRS ITEM

This listing is for a Star Lab C1000-STR-230EU Plate Centrifuge. The unit is in full working condit (more)ion and is ready for immediate release. The plate centrifuge makes the safe and quick spin down of droplets and condensation very easy. Sealed plates are loaded vertically and surface tension keeps samples in place so there is no danger of spilling samples. The centrifuge accepts all plates up to 25 mm high. An optional adaptor is available for centrifuging 48-well PCR plates and 0.2 ml PCR tubes or strips. Less than quarter the size of most plate centrifuges Accommodates two plates Rapid start to stop Use before and after thermal cycling to increase PCR yield Accepts skirted, semi-skirted and non-skirted plates Easy cleaning and maintenance Rotor capacity: Two plates, any style, up to 25 mm high Power supply: 230 V, 50/60 Hz Permissible Relative Humidity: < 85% Dimensions (W × D × H) 190 mm × 210 mm × 193 mm

This Heraeus Biofuge Pico Centrifuge with 3324 Rotor was removed from a university lab where it was  (more)surplus to requirements. The unit powers on and is in good cosmetic condition. There are some light tape marks from general use. The lid opens, the brake works and all buttons appear to be responsive. The LCD screen is working and displays clearly. The unit was tested at the max speed of 13000rpm and ran smoothly. The unit has the following rotor fitted; Heraeus Rotor #3324•PP1/96•Max Speed 13000rpm• Max load 24x4g•24x 2.0 flat cap tube holders. No further testing done.

This Thermo MegaFuge 16R Benchtop Refrigerated Laboratory Centrifuge was removed from a university l (more)ab where it was surplus to requirements. The unit has been recertified by a service engineer who has fully tested it. It is in full working order. It has had a brand new board fitted recently and has been thoroughly inspected. It does not come with a rotor. It is in excellent cosmetic condition with only minor marks from use.

Sorvall Discovery 100SE This was removed from a university lab where it was surplus to requirements (more). The unit is missing the power switch and the cable is split. It looks like some other parts have been removed and cables have been disconnected inside. It is in otherwise reasonable cosmetic condition with minor marks from use. The rear panel is showing signs of damage. It is sold for spares/repairs.

Sorvall SS-34 centrifuge rotor. Capacity of 8 x 50mL. Max. speed 25,000rpm; max. RCF 50,228 x g. Ang (more)le 34°. Tube Diameter 29mm. Compatible with Sorvall RC-5, RC-5B, RC-5B Plus, RC-5C, RC-5C Plus, RC6c Plus, and RC-26 Plus centrifuges.

Heating thermostat Alpha: from 25 to 100°C LAUDA Alpha is the most affordable choice when it comes t (more)o high quality LAUDA thermostats. These reliable and easy-to-use thermostats, with features reduced to the essentials, can be operated with non-flammable liquids and are suitable for both indoor and outdoor temperature control tasks. The cooling system, the pump circulation set and the bath cover set are available as accessories for all thermostats. With the water cooling system, the thermostat can be used for operations from 20° to 100°C. Low-level and overtemperature protection for operation with non-flammable liquids. Qualitative characteristics - Simple and intuitive menu navigation with three-button operation via a large, clearly legible LED display - Integrated timer function to allow automatic shutdown of the device - Under / over temperature protection for operation with non-flammable liquids The back of the Alpha thermostat: clamp, power supply and reset button. Simple control with three buttons and three indicator lights: active heating, active cooling and alarm light. Can be used with any bath vessel up to 30 mm thick with the included screw clamp. Graph of pump characteristics in Alpha Lauda models. Graph of heating curves of Aplha Lauda models. TECHNICAL VISUALIZATION a - Control head with clamp b - Bath vessel c - Four mounting feet 1 - Temperature controller with four segment LED display 2 - Heater active (yellow LED is lit) Cooler active (blue LED is lit) Error signal (red LED is flashing) 3 - Menu functions, select and Enter keys 4 - Mains switch 5 - Screw clamp 6 - Tubular heater 7 - Temperature probe Pt100 8 - Pump outflow with pump outflow reducer 1 - Reset button (press only if the display shows SAFE ) 2 - Cooler cable 3 - Rating label 4 - Mains cable 5 - Screw clamp

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The QIAgility is a compact benchtop instrument that enables rapid, high-precision setup of PCR exper (more)iments with ready-to-use software for ease and convenience. The software provides step-by-step guidance for worktable setup and automatic calculation of all mixes, eliminating the need to program pipetting steps. Just select the kit and cycler, define your targets and start the run. For added flexibility the QIAgility is operated via a laptop computer. The instrument is highly suited for laboratories performing PCR and RT-PCR reactions with applications in: ​ Gene expression analysis Genotyping Cloning Pathogen detection Food and veterinary testing Pipetting head: Single channel Tip volume: 1 – 200 µl HEPA filter: Preinstalled dual-cartridge HEPA filter system provides positive pressure clean air within the closed hood. Liquid-level sensing: Minimum detection volume (10 µl in 200 µl PCR tubes). Only functional in combination with QIAGEN Conductive Filtered Tips. Table capacity: 6x SBS positions (127.76 x 85.48 mm) for adapters and Tip Rack Holders 1x Master Mix Block 1x Reagent Block Precision: CV <1%, 5 – 200 µl (dry-well transfer) CV <5%, 2 – 5 µl (wet-well transfer) CV <10%, 1 µl UV lamp: Preinstalled UV lamp for worktable decontamination Dimensions (HxWxD): 450 x 540 x 630 mm Weight: 41 kg

This Edwards 8 E2M8 Two Stage Rotary Vane Vacuum Pump was removed from a university lab where it was (more) surplus to requirements. The unit has been professionally serviced and is in full working order. It performs to 3.5 x 10 - 3. It is in good cosmetic condition with minor marks.

Polyscience AD28H200-A11B 28L Heated Circulator, Advanced Digital (Ambient +10 to 200C), 120V, 60Hz3 (more)D Visualization of the Polyscience CirculatorThe rendered image can be freely rotated in a full 360-degree view, allowing you to zoom in, pause, and explore every angle. For enhanced detail, the rendering can also be displayed in full-screen mode. This 3D model is designed exclusively for visualization purposes and may not accurately represent the actual appearance of your product. Your browser does not support iframes. The Polyscience AD28H200-A11B 28L Heated Circulator is intended for the precise temperature control ofsuitable liquids in a reservoir. Extremely easy to use and maintain, itcombines design innovation with highly intuitive operation to deliverconvenient and versatile liquid temperature control for a wide range ofapplications.Features Intuitive 3.75” (9.5 cm) display with touch-pad control 4 languages: French, German, Spanish, English Swivel 180™ Rotating Controller On-board connectivity: USB-A &amp; B, Ethernet, RS-232/RS-485 and external temperature probe On-screen prompts Automatic performance optimization and specific heat tuning Single-point calibration capability Click Here to View Product Video INCLUDED: The Polyscience AD28H200-A11B 28L Heated Circulator, Advanced Digital (Ambient +10 to 200C), 120V, 60Hz includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Benchmark Red Mini Centrifuge w/ Microtube and PCR Rotors The Benchmark series of mini centrifuges i (more)s ideal for quick spin downs of micro samples. The easy-open lid permits convenient single-handed operation. The clear lid and electronic safety cut-off allow the user to safely observe samples at all times. The centrifuge quickly accelerates to maximum speed (6,600 rpm / 2,200 rcf) and stops within seconds. The advanced motor mounting system provides quiet, vibration-free operation. All centrifuges include a traditional angle rotor with capacity for six standard microtubes (1.5ml to 2.0ml) as well as a strips tube rotor for 1 PCR strip or 16 individual 0.2ml tubes. Additional adapters are also included for 0.5ml tubes. The rotors can be easily interchanged by the user within a matter of seconds. INCLUDED: The Benchmark Red Mini Centrifuge w/ Microtube and PCR Rotors includes: - 6 x 1.5/2.0ml Fixed Angle Rotor - PCR Tube Rotor - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty